Re: [Users] ovirtmgmt not installed

4 Dec 2013

      I personally have a F19 host working against 3.3 engine. Could you detail what doesn't work, and possibly attach engine and VDSM logs when an operation fails?

Assaf Muller, Cloud Networking Engineer 
Red Hat 

----- Original Message -----
From: "Pascal Jakobi" <pjakobi@yahoo.fr>
To: users@ovirt.org
Sent: Wednesday, December 4, 2013 8:22:05 AM
Subject: Re: [Users] ovirtmgmt not installed

At the end, I could not make an F19 Fedora host work against a 3.3 engine. I suggest someone from the eng team has a look at it. some stuff just does not work there. 

Therefore, I downgraded the fedora host to F18. On the engine side, I got the following error message : 
Host lab2 is compatible with versions (3.0,3.1,3.2) and cannot join Cluster Default which is set to version 3.3. 
Don't know what is to be set.... 

Anyway, I created a 3.2 cluster and installed the host into it. Seems to work (the host is up). 

Thanks again for support. 

Pascal Jakobi 
116 rue de Stalingrad 
93100 Montreuil, France 
Tel : + 33 6 87 47 58 19 
@ : pjakobi@yahoo.fr 

Le Mardi 3 décembre 2013 14h04, Pascal Jakobi <pjakobi@yahoo.fr> a écrit : 
Will do within a couple of hours. 
Many, many thanks 
Pascal Jakobi 
116 rue de Stalingrad 
93100 Montreuil, France 
Tel : + 33 6 87 47 58 19 
@ : pjakobi@yahoo.fr 

Le Mardi 3 décembre 2013 13h43, Antoni Segura Puimedon <asegurap@redhat.com> a écrit : 
Hi Pacal, 

Would you mind joining #ovirt at irc.oftc.net and pinging apuimedo? 
I have some questions that could be faster solved online. 

Best, 

Antoni 

----- Original Message -----
...
From: "Pascal Jakobi" < pjakobi@yahoo.fr > 
To: "Pascal Jakobi" < pascal.jakobi@gmail.com >, "Moti Asayag" < masayag@redhat.com > 
Cc: users@ovirt.org 
Sent: Tuesday, December 3, 2013 1:11:36 PM 
Subject: Re: [Users] ovirtmgmt not installed
Still the same, even with networking working like a charm... 
Any idea ?
[ root@lab2 vdsm]# vdsClient -s 0 getVdsCaps 
HBAInventory = {'FC': [], 'iSCSI': [{'InitiatorName': 
'iqn.1994-05.com.redhat:a0bc8a5f9a5d'}]} 
ISCSIInitiatorName = 'iqn.1994-05.com.redhat:a0bc8a5f9a5d' 
bondings = {'bond0': {'addr': '', 
'cfg': {}, 
'hwaddr': '96:9d:8f:27:e1:8f', 
'ipv6addrs': [], 
'mtu': '1500', 
'netmask': '', 
'slaves': []}} 
bridges = {} 
clusterLevels = ['3.0', '3.1', '3.2', '3.3'] 
cpuCores = '4' 
cpuFlags = 
'fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,aperfmperf,eagerfpu,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,dca,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,aes,xsave,avx,lahf_lm,ida,arat,epb,xsaveopt,pln,pts,dtherm,tpr_shadow,vnmi,flexpriority,ept,vpid,model_Nehalem,model_Conroe,model_coreduo,model_core2duo,model_Penryn,model_Westmere,model_n270,model_SandyBridge' 
cpuModel = 'Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz' 
cpuSockets = '1' 
cpuSpeed = '3708.000' 
cpuThreads = '8' 
emulatedMachines = ['pc', 
'q35', 
'isapc', 
'pc-0.10', 
'pc-0.11', 
'pc-0.12', 
'pc-0.13', 
'pc-0.14', 
'pc-0.15', 
'pc-1.0', 
'pc-1.1', 
'pc-1.2', 
'pc-1.3', 
'none'] 
guestOverhead = '65' 
hooks = {} 
kvmEnabled = 'true' 
lastClient = '192.168.1.41' 
lastClientIface = 'em1' 
management_ip = '0.0.0.0' 
memSize = '16001' 
netConfigDirty = 'True' 
networks = {} 
nics = {'em1': {'addr': '192.168.1.42', 
'cfg': {}, 
'hwaddr': '00:1a:6b:51:de:b4', 
'ipv6addrs': ['fe80::21a:6bff:fe51:deb4/64'], 
'mtu': '1500', 
'netmask': '255.255.255.0', 
'speed': 100}} 
operatingSystem = {'name': 'Fedora', 'release': '4', 'version': '19'} 
packages2 = {'kernel': {'buildtime': 1384978944.0, 
'release': '200.fc19.x86_64', 
'version': '3.11.9'}, 
'libvirt': {'buildtime': 1384730741, 
'release': '2.fc19', 
'version': '1.0.5.7'}, 
'mom': {'buildtime': 1375215820, 'release': '3.fc19', 'version': '0.3.2'}, 
'qemu-img': {'buildtime': 1383700301, 
'release': '13.fc19', 
'version': '1.4.2'}, 
'qemu-kvm': {'buildtime': 1383700301, 
'release': '13.fc19', 
'version': '1.4.2'}, 
'spice-server': {'buildtime': 1383130020, 
'release': '3.fc19', 
'version': '0.12.4'}, 
'vdsm': {'buildtime': 1384274283, 'release': '11.fc19', 'version': '4.13.0'}} 
reservedMem = '321' 
software_revision = '11' 
software_version = '4.13' 
supportedENGINEs = ['3.0', '3.1', '3.2', '3.3'] 
supportedProtocols = ['2.2', '2.3'] 
uuid = '0A583269-811F-E211-AA06-001A6B51DEB4' 
version_name = 'Snow Man' 
vlans = {} 
vmTypes = ['kvm'] 
[ root@lab2 vdsm]#
Pascal Jakobi 
116 rue de Stalingrad 
93100 Montreuil, France 
Tel : + 33 6 87 47 58 19 
@ : pjakobi@yahoo.fr
Le Lundi 2 décembre 2013 10h31, Pascal Jakobi < pascal.jakobi@gmail.com > a 
écrit : 
As a matter of fact, when I installed F19, it created an eno1 device, aliased 
to em1. Don't know why, yet. 
Even adding a "GATEWAY" clause in /etc/sysconfig/network does not seem to 
change the problem....
Will check how to change the device name.
2013/12/1 Moti Asayag < masayag@redhat.com >
Hi Pascal,
----- Original Message -----
...
From: "Pascal Jakobi" < pascal.jakobi@gmail.com > 
To: "Mike Kolesnik" < mkolesni@redhat.com > 
Cc: users@ovirt.org , masayag@redhat.com 
Sent: Sunday, December 1, 2013 10:58:40 AM 
Subject: Re: ovirtmgmt not installed
Mike
Here you go. However, please note that I must investigate the connection 
issue that Alon saw. will do it tomorrow. 
Many thanks to you folks. 
P
According to the output of 'nics' element, the 'em1' device is missing his 
default gateway entry under the 'cfg' element.
One reason for that can be there is no 
'/etc/sysconfig/network-scripts/ifcfg-em1' 
file and vdsm fails to obtain the default gateway for it.
Could you create this file by your own and retry installing the host ? 
After creating the file (make sure it contains NM_CONTROLLED=no), restart the 
network service 
and run 'vdsClient -s 0 getVdsCaps' to make sure 'em1' output contains the 
data its 'cfg' sub- 
element.
...
[ root@lab2 ~]# vdsClient -s 0 getVdsCaps 
HBAInventory = {'FC': [], 'iSCSI': [{'InitiatorName': 
'iqn.1994-05.com.redhat:eea1322229a8'}]} 
ISCSIInitiatorName = 'iqn.1994-05.com.redhat:eea1322229a8' 
bondings = {'bond0': {'addr': '', 
'cfg': {}, 
'hwaddr': 'fa:7e:79:56:5a:c2', 
'ipv6addrs': [], 
'mtu': '1500', 
'netmask': '', 
'slaves': []}} 
bridges = {} 
clusterLevels = ['3.0', '3.1', '3.2', '3.3'] 
cpuCores = '4' 
cpuFlags = 
'fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,aperfmperf,eagerfpu,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,dca,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,aes,xsave,avx,lahf_lm,ida,arat,epb,xsaveopt,pln,pts,dtherm,tpr_shadow,vnmi,flexpriority,ept,vpid,model_Nehalem,model_Conroe,model_coreduo,model_core2duo,model_Penryn,model_Westmere,model_n270,model_SandyBridge' 
cpuModel = 'Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz' 
cpuSockets = '1' 
cpuSpeed = '3744.000' 
cpuThreads = '8' 
emulatedMachines = ['pc', 
'q35', 
'isapc', 
'pc-0.10', 
'pc-0.11', 
'pc-0.12', 
'pc-0.13', 
'pc-0.14', 
'pc-0.15', 
'pc-1.0', 
'pc-1.1', 
'pc-1.2', 
'pc-1.3', 
'none'] 
guestOverhead = '65' 
hooks = {} 
kvmEnabled = 'false' 
lastClient = '192.168.1.41' 
lastClientIface = 'em1' 
management_ip = '0.0.0.0' 
memSize = '16001' 
netConfigDirty = 'False' 
networks = {} 
nics = {'em1': {'addr': '192.168.1.42', 
'cfg': {}, 
'hwaddr': '00:1a:6b:51:de:b4', 
'ipv6addrs': ['fe80::21a:6bff:fe51:deb4/64'], 
'mtu': '1500', 
'netmask': '255.255.255.0', 
'speed': 100}} 
operatingSystem = {'name': 'Fedora', 'release': '2', 'version': '19'} 
packages2 = {'kernel': {'buildtime': 1384978944.0, 
'release': '200.fc19.x86_64', 
'version': '3.11.9'}, 
'libvirt': {'buildtime': 1384730741, 
'release': '2.fc19', 
'version': '1.0.5.7'}, 
'mom': {'buildtime': 1375215820, 'release': '3.fc19', 
'version': '0.3.2'}, 
'qemu-img': {'buildtime': 1383700301, 
'release': '13.fc19', 
'version': '1.4.2'}, 
'qemu-kvm': {'buildtime': 1383700301, 
'release': '13.fc19', 
'version': '1.4.2'}, 
'spice-server': {'buildtime': 1383130020, 
'release': '3.fc19', 
'version': '0.12.4'}, 
'vdsm': {'buildtime': 1384274283, 'release': '11.fc19', 
'version': '4.13.0'}} 
reservedMem = '321' 
software_revision = '11' 
software_version = '4.13' 
supportedENGINEs = ['3.0', '3.1', '3.2', '3.3'] 
supportedProtocols = ['2.2', '2.3'] 
uuid = '0A583269-811F-E211-AA06-001A6B51DEB4' 
version_name = 'Snow Man' 
vlans = {} 
vmTypes = ['kvm']
2013/12/1 Mike Kolesnik < mkolesni@redhat.com >
...
------------------------------
*Hi there *
Hi Pascal,
*I installed a console on F19, then a F19 host (time 11:09 today).*
*Everything works fine, apart from the installation of the mgmt network 
at 
the end. * 
*Can someone tell me what's going wrong ?*
Can you please send the output of vdsCaps from the host (vdsClient -s 0 
getVdsCaps)?
*Thxs in advance*
*Pascal*
-- 
*Pascal Jakobi* 
116 rue de Stalingrad 
93100 Montreuil, France
* +33 6 87 47 58 19 * Pascal.Jakobi@gmail.com
-- 
Pascal Jakobi 
116 rue de Stalingrad 
93100 Montreuil, France 
+33 6 87 47 58 19 
Pascal.Jakobi@gmail.com
_______________________________________________ 
Users mailing list 
Users@ovirt.org 
http://lists.ovirt.org/mailman/listinfo/users
...
_______________________________________________ 
Users mailing list 
Users@ovirt.org 
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users