Re: [ovirt-users] Best setup for nfs domain and 1gbs adapters on hosts

On Thu, Feb 23, 2017 at 1:11 PM Gianluca Cecchi <gianluca.cecchi@gmai l.com> wrote: > On Sat, Feb 18, 2017 at 1:35 PM, Karli Sjöberg <karli.sjoberg(a)slu.s > e> wrote: > > > > > > Thanks for your answer, K! > > > So you mean to make a unique bond composed by all 4 network > > adapters and put all the networks on it, comprised ovirtmgmt and > > such, through clans? > > > How do you configure 802.3ad on 4 adapters? How many switches > > do you have to connect to, from these 4 adapters? Or do you use > > round robin bonding (but I presume it is not supported in court > > this bond)? > > > Thanks! > > Well, in our case, we have two clustered switches from C-company > > so two NICs in each. And then, yeah, different VLANs for every > > network on top of the same bond. Works like a charm:) > > /K > > > > Hello K, > coming back to the question, I have only 1 VLAN dedicated to Netapp > NFS infrastructure and I can't manage to add another. > Can I manage to use anyway 802.3ad on 4 adapters using any > particular option for this bonding mode at oVirt and switch side?  > I think that at network side we have 4 x 3130 clustered Cisco > switches so in theory I can use this bonding mode. > I don't know if I can configure more than one IP on the same lan > inside one Netapp svm to configure more that one NFS share. > And if 802.3ad mode would assure to use 2 different network > adapters when pointing to 2 different ips on the same network for > the shares > And multiple mount points, hence multiple SDs? They might, or might not use the same physical NIC. Y.