Re: [Users] VM not starting up

I'm going through the log (which is quite big) and I've found out this part which is like 2 seconds after the vmcreate part. Have a look maybe this is what you're looking for. It contains the ERROR and Traceback in it. http://ur1.ca/gakhc On Tue, Dec 31, 2013 at 4:36 PM, Gadi Ickowicz <gickowic(a)redhat.com&gt;wrote: > It would be helpful to get a bit more information from the logs - after > the vmCreate there are several other things that occur before the vm > process is actually launched (prepareImage and following that the actual > vm's should be visible in the log). Try to search for an error in the vdsm > log, and if you cannot find one attach logs containing the vmCreate and the > other operations I mentioned. > > Errors in the vdsm log are usually logged in lines containing ERROR, but > sometimes if the error comes from libvirt it may not contain the uppercase > ERROR and be logged as libvirtError or something similar. > > you should also have the qemu log for the vm you are trying to run. > usually under /var/log/libvirt/qemu/<name_of_the_vm>.log - maybe that will > give more information regarding the failure > > Gadi Ickowicz > > ----- Original Message ----- > From: "Joop" <jvdwege(a)xs4all.nl&gt; > To: "Nauman Abbas" <nauman.abbas(a)seecs.edu.pk&gt; > Cc: &quot;users(a)ovirt.org&quot; <Users(a)ovirt.org&gt; > Sent: Tuesday, December 31, 2013 12:51:10 PM > Subject: Re: [Users] VM not starting up > > Nauman Abbas <nauman.abbas(a)seecs.edu.pk&gt; wrote: > > > I've attached the portions with vmcreate. I found 5 instances of pairs of > call vmcreate and return vmcreate. I've separated them with lines. See if > that helps. > > > On Tue, Dec 31, 2013 at 2:58 PM, Gadi Ickowicz < gickowic(a)redhat.com > > wrote: > > > Hi, > > Maybe you can send just the relevant part of the vdsm logs that contain > the attempt to launch the vm itself - it should start with vmCreate. Try to > find "::call vmCreate with (..." and either find the matching "return > vmCreate with" > or an maybe there is an ERROR or Traceback in the vdsm log following the > vmCreate call. > > Gadi Ickowicz > > ----- Original Message ----- > From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk > > To: "Meital Bourvine" < mbourvin(a)redhat.com > > Cc: " users(a)ovirt.org " < Users(a)ovirt.org > > Sent: Tuesday, December 31, 2013 11:47:12 AM > Subject: Re: [Users] VM not starting up > > Vdsm is running fine. Also checked the clocks. You were right, the Engine > clock was 5 hours ahead of Node clock. I've corrected that but still the > same issue. > > > On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine < mbourvin(a)redhat.com&gt; wrote: > > > > Are you sure that vdsm is running? > > The error happened at 2013-12-31 11:32:56,999 (engine.log) > but the last line in vdsm.log is from 2013-12-31 07:20:50,807 > > Also make sure that your clocked are synced. > > > > > > > From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk > > To: "Meital Bourvine" < mbourvin(a)redhat.com > > Cc: " users(a)ovirt.org " < Users(a)ovirt.org > > Sent: Tuesday, December 31, 2013 9:39:09 AM > > Subject: Re: [Users] VM not starting up > > Sending files one by one. Vdsm.log > > > On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine < mbourvin(a)redhat.com&gt; wrote: > > > > Engine log can be found on the engine (while vdsm.log is on the host). > The full path is - /var/log/ovirt-engine/engine.log > > audit.log - /var/log/audit/audit.log > > About the vdsm log - I don't see any error there, I think that you cut > too much from it. > > > > > From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk > > To: "Meital Bourvine" < mbourvin(a)redhat.com > > Cc: " users(a)ovirt.org " < Users(a)ovirt.org > > Sent: Tuesday, December 31, 2013 8:42:43 AM > Subject: Re: [Users] VM not starting up > > > Hello Meital > > SELinux is off. The cluster doesn't work if SELinux is on, my hosts and > storage is showing up as okay but VM is not starting up. > > I've managed to get vdsm.log but cannot find engine.log and audit.log. > Sorry for being a noob, if you can tell me the path to these files I'll > send them right away. > > > On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine < mbourvin(a)redhat.com&gt; wrote: > > > > Hi Nauman, > > Maybe it's a selinux issue? > Please try running `setenforce 0` before starting the vm. > > Also please attach engine.log, vdsm.log, and audit.log > > > > > From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk > > To: " users(a)ovirt.org " < Users(a)ovirt.org > > Sent: Tuesday, December 31, 2013 7:13:01 AM > Subject: [Users] VM not starting up > > > Hello all, > > First of all thank you for your help, I've finally managed to get my > Cluster configured properly but now that I create VMs I'm facing another > problem. Whenever I start my VM I get this error. > > " VM TestVm is down. Exit message: Child quit during startup handshake: > Input/output error." > > I've googled around but haven't found any satisfactory solution. If > anyone can help out it would be great. > > Regards > > Nauman Abbas > Assistant System Administrator (LMS), > Room No. A-207, SEECS, > National University of Sciences & Technology, > + 92 321 5359946 > > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > > > -- > > Nauman Abbas > Assistant System Administrator (LMS), > Room No. A-207, SEECS, > National University of Sciences & Technology, > + 92 321 5359946 > > > > > -- > > Nauman Abbas > Assistant System Administrator (LMS), > Room No. A-207, SEECS, > National University of Sciences & Technology, > + 92 321 5359946 > > > > > -- > > Nauman Abbas > Assistant System Administrator (LMS), > Room No. A-207, SEECS, > National University of Sciences & Technology, > + 92 321 5359946 > > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > > > -- > > Nauman Abbas > Assistant System Administrator (LMS), > Room No. A-207, SEECS, > National University of Sciences & Technology, > + 92 321 5359946 > > Paste your logs to fpaste.org or similar and put the url in the mail. > Your snippets don‘t contain any errors that i can see. > > -- > Sent from my Android tablet with K-9 Mail. Please excuse my brevity. > > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946