Re: [ovirt-users] OVN Provider setup issues

On Tue, Nov 08, 2016 at 09:21:13AM +0100, Andrea Fagiani wrote: > Hi all, > > I've been messing around with the ovirt-ovn-provider [1] and I've run into > some issues during the initial setup. > > I have a 5-node cluster (running the hosted-engine VA), LEGACY virtual > switch; this test was done on a single host. Following the instructions from > the aforementioned blog post, I have downloaded the ovirt-provider-ovn and > ovirt-provider-ovn-driver rpms, and built the rpm packages for: > > - openvswitch (2.6.90) > - openvswitch-ovn-common > - openvswitch-ovn-host > - openvswitch-ovn-central > - python-openvswitch > > I set up a dedicated VM for the OVN controller, installed ovs and > ovn-central, started the ovn-northd and ovirt-provider-ovn services. So far > so good. I then moved on to the oVirt host and installed the above packages > (minus ovn-central) as well as the ovirt-provider-ovn-driver provided, > started the ovn-controller service and ran > > # vdsm-tool ovn-config <ovn controller IP> <host management IP> > > Executing the suggested checks I noticed that something didn't quite go as > planned. Below is the /var/log/openvswitch/ovn-controller.log from the host > machine. There are no firewalls involved (not even on the servers) and I > also tried disabling SELinux but to no avail. > > Any ideas? > > Thanks, > Andrea > > [1] http://www.ovirt.org/blog/2016/11/ovirt-provider-ovn/ > > > 2016-11-07T14:22:09.552Z|00001|vlog|INFO|opened log file > /var/log/openvswitch/ovn-controller.log > 2016-11-07T14:22:09.553Z|00002|reconnect|INFO|unix:/var/run/openvswitch/db.sock: > connecting... > 2016-11-07T14:22:09.553Z|00003|reconnect|INFO|unix:/var/run/openvswitch/db.sock: > connected > 2016-11-07T14:22:09.555Z|00004|reconnect|INFO|tcp:10.100.248.11:6642: > connecting... > 2016-11-07T14:22:09.555Z|00005|reconnect|INFO|tcp:10.100.248.11:6642: > connected > 2016-11-07T14:22:09.556Z|00006|ofctrl|INFO|unix:/var/run/openvswitch/br-int.mgmt: > connecting to switch > 2016-11-07T14:22:09.556Z|00007|rconn|INFO|unix:/var/run/openvswitch/br-int.mgmt: > connecting... > 2016-11-07T14:22:09.557Z|00008|pinctrl|INFO|unix:/var/run/openvswitch/br-int.mgmt: > connecting to switch > 2016-11-07T14:22:09.557Z|00009|rconn|INFO|unix:/var/run/openvswitch/br-int.mgmt: > connecting... > 2016-11-07T14:22:09.557Z|00010|rconn|INFO|unix:/var/run/openvswitch/br-int.mgmt: > connected > 2016-11-07T14:22:09.557Z|00011|rconn|INFO|unix:/var/run/openvswitch/br-int.mgmt: > connected > 2016-11-07T14:22:09.558Z|00012|ofctrl|INFO|OpenFlow error: OFPT_ERROR > (OF1.3) (xid=0x9): OFPBMC_BAD_FIELD > OFPT_FLOW_MOD (OF1.3) (xid=0x9): > (***truncated to 64 bytes from 240***) > 00000000 04 0e 00 f0 00 00 00 09-00 00 00 00 00 00 00 00 |................| > 00000010 00 00 00 00 00 00 00 00-22 00 00 00 00 00 00 00 |........".......| > 00000020 ff ff ff ff ff ff ff ff-ff ff ff ff 00 00 00 00 |................| > 00000030 00 01 00 04 00 00 00 00-00 04 00 b8 00 00 00 00 |................| Andrea, could you tell (mostly Lance) which kernel version are you using?