[ovirt-users] Re: Import an snapshot of an iSCSI Domain
I think I’ve found the root cause, and it’s the LVM inside the iSCSI volume:
[root@rhvh5 ~]# pvscan
WARNING: Not using device /dev/mapper/36589cfc000000db9cf56949c63d338ef for PV
fTIrnd-gnz2-dI8i-DesK-vIqs-E1BK-mvxtha.
WARNING: PV fTIrnd-gnz2-dI8i-DesK-vIqs-E1BK-mvxtha prefers device
/dev/mapper/36589cfc0000006f6c96763988802912b because device is used by LV.
PV /dev/mapper/36589cfc0000006f6c96763988802912b VG
9377d243-2c18-4620-995f-5fc680e7b4f3 lvm2 [<10.00 TiB / 7.83 TiB free]
PV /dev/mapper/36589cfc000000a1b985d3908c07e41ad VG
650b0003-7eec-4fa5-85ea-c019f6408248 lvm2 [199.62 GiB / <123.88 GiB free]
PV /dev/mapper/3600605b00805d8a01c2180fd0d8d8dad3 VG rhvh_rhvh5
lvm2 [<277.27 GiB / 54.55 GiB free]
Total: 3 [<10.47 TiB] / in use: 3 [<10.47 TiB] / in no VG: 0 [0 ]
The device that’s not being using is the snapshot. There’s a way to change the ID of the
device so I can import the data domain?
Thanks.
On 3 Mar 2022, at 20:21, Vinícius Ferrão via Users
<users(a)ovirt.org> wrote:
Hello,
I need to import an old snapshot of my Data domain but oVirt does not find the snapshot
version when importing on the web interface.
To be clear, I’ve mounted a snapshot on my storage, and exported it on iSCSI. I was
expecting that I could be able to import it on the engine.
On the web interface this Import Pre-Configured Domain finds the relative IQN but it does
not show up as a target.
Any ideas?
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/3WEQQHZ46DK...