----- Original Message -----
From: "Itamar Heim" <iheim(a)redhat.com>
To: "Eli Mesika" <emesika(a)redhat.com>
Cc: users(a)ovirt.org, "Dmitriy A Pyryakov" <DPyryakov(a)ekb.beeline.ru>
Sent: Monday, September 10, 2012 2:14:31 PM
Subject: Re: HA: Re: [Users] HP Integrated Lights Out 3
On 09/10/2012 02:07 PM, Eli Mesika wrote:
>
>
> ----- Original Message -----
>> From: "Itamar Heim" <iheim(a)redhat.com>
>> To: "Dmitriy A Pyryakov" <DPyryakov(a)ekb.beeline.ru>
>> Cc: "Eli Mesika" <emesika(a)redhat.com>, users(a)ovirt.org
>> Sent: Monday, September 10, 2012 12:51:03 PM
>> Subject: Re: HA: Re: [Users] HP Integrated Lights Out 3
>>
>> On 09/10/2012 12:21 PM, Dmitriy A Pyryakov wrote:
>>> engine=# select * from vdc_options where option_name in
>>>
('FenceAgentDefaultParams','FenceAgentMapping','VdsFenceOptionMapping','VdsFenceType');
>>> option_id | option_name | option_value | version
>>>
-----------+-------------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+---------
>>> 77 | FenceAgentMapping | ilo3=ipmilan | general
>>> 76 | FenceAgentDefaultParams | ilo3:lanplus,power_wait=4 |
>>> general
>>> 323 | VdsFenceType |
>>> alom,apc,bladecenter,drac5,eps,ilo,ipmilan,rsa,rsb,wti,cisco_ucs
>>> |
>>> 3.1
>>> 322 | VdsFenceType |
>>
>> eli - ilo3 is missing in 3.1?
> Yes, this is certainly a bug, I will open it and resolve ASAP
this is a db change, so dmitriy can apply it easily as well.
Sure
Dmitriy , please apply
1) run on your Postgres engine :
select
fn_db_update_config_value('VdsFenceType','alom,apc,bladecenter,drac5,eps,ilo,ilo3,ipmilan,rsa,rsb,wti,cisco_ucs','3.1');
2) Restart engine
3) Check again (you should have ilo3 now in the UI list)
4) Let me know if it works
Thanks
>> and maybe another bug on not passing fence options which i
>> remember
>> we
>> had at some point
> Yes, I believe that the above will solve the issue since we had
> already tested ilo3 unless we have a regression I am not aware
> about.
lets hope so. question is if it was fixed after ovirt 3.1 was done.
>
>>
>>> alom,apc,bladecenter,drac5,eps,ilo,ilo3,ipmilan,rsa,rsb,wti,cisco_ucs
>>> | 3.0
>>> 321 | VdsFenceType |
>>> alom,apc,bladecenter,drac5,eps,ilo,ipmilan,rsa,rsb,wti,cisco_ucs
>>> |
>>> 2.2
>>> 318 | VdsFenceOptionMapping |
>>>
alom:secure=secure,port=ipport;apc:secure=secure,port=ipport,slot=port;bladecenter:secure=secure,port=ipport,slot=port;drac5:secure=secure,slot=port;eps:slot=port;ilo:secure=ssl,port=ipport;ipmilan:;rsa:secure=secure,port=ipport;rsb:;wti:secure=secure,port=ipport,slot=port;cisco_ucs:secure=ssl,slot=port;ilo3:
>>> | general
>>> (6 rows)
>>>
>>> --
>>>
>>> Dmitriy Pyryakov
>>> VimpelCom Ltd.
>>>
>>>
>>> Inactive hide details for Eli Mesika ---10.09.2012
>>> 15:02:16--------
>>> Original Message ----- > From: "Dmitriy A Pyryakov"
<DPyryaEli
>>> Mesika
>>> ---10.09.2012 15:02:16-------- Original Message ----- > From:
>>> "Dmitriy A
>>> Pyryakov" <DPyryakov(a)ekb.beeline.ru>
>>>
>>> От: Eli Mesika <emesika(a)redhat.com>
>>> Кому: Dmitriy A Pyryakov <DPyryakov(a)ekb.beeline.ru>
>>> Копия: users(a)ovirt.org, Itamar Heim <iheim(a)redhat.com>
>>> Дата: 10.09.2012 15:02
>>> Тема: Re: [Users] HP Integrated Lights Out 3
>>> ------------------------------------------------------------------------
>>>
>>>
>>>
>>>
>>>
>>> ----- Original Message -----
>>> > From: "Dmitriy A Pyryakov"
<DPyryakov(a)ekb.beeline.ru>
>>> > To: "Itamar Heim" <iheim(a)redhat.com>
>>> > Cc: "Eli Mesika" <emesika(a)redhat.com>,
users(a)ovirt.org
>>> > Sent: Monday, September 10, 2012 11:57:25 AM
>>> > Subject: Re: [Users] HP Integrated Lights Out 3
>>> >
>>> >
>>> >
>>> >
>>> >
>>> > Yes, but oVirt don't pass this options to fence_ipmilan
>>> > command.
>>> > There are all logged options: Thread-43892::DEBUG::2012-09-07
>>> > 13:14:03,094::API::1024::vds::(fenceNode)
>>> >
>>>
fenceNode(addr=192.168.10.103,port=,agent=ipmilan,user=fence_ilo,passwd=XXXX,action=status,secure=,options=)
>>> > Thread-43892::DEBUG::2012-09-07
>>> > 13:14:04,116::API::1050::vds::(fenceNode) rc 1 in
>>> > agent=fence_ipmilan
>>> > ipaddr=192.168.10.103
>>> > login=fence_ilo
>>> > option=status
>>> > passwd=XXXX
>>> > out Getting status of IPMI:192.168.10.103...Chassis power =
>>> > Unknown
>>> > Failed
>>> > err
>>> >
>>>
>>> Hi
>>> As you see, options arrived to VDSM as empty string
>>> Can you please paste the output of the following SQL
>>>
>>> select * from vdc_options where option_name =
>>> 'FenceAgentDefaultParams';
>>>
>>> Thanks
>>>
>>>
>>> > - - Dmitriy Pyryakov VimpelCom Ltd.
>>> > Inactive hide details for Itamar Heim ---10.09.2012
>>> > 14:48:06---On
>>> > 09/10/2012 11:45 AM, Dmitriy A Pyryakov wrote: > No, I don't
>>> > Itamar
>>> > Heim ---10.09.2012 14:48:06---On 09/10/2012 11:45 AM, Dmitriy
>>> > A
>>> > Pyryakov wrote: > No, I don't see an ilo3 type of fencing
>>> > device
>>> > i
>>> >
>>> > От: Itamar Heim <iheim(a)redhat.com>
>>> > Кому: Dmitriy A Pyryakov <DPyryakov(a)ekb.beeline.ru>
>>> > Копия: Eli Mesika <emesika(a)redhat.com>, users(a)ovirt.org
>>> > Дата: 10.09.2012 14:48
>>> > Тема: Re: [Users] HP Integrated Lights Out 3
>>> >
>>> >
>>> >
>>> >
>>> > On 09/10/2012 11:45 AM, Dmitriy A Pyryakov wrote:
>>> > > No, I don't see an ilo3 type of fencing device in my
"Power
>>> > > Management" tab.
>>> > >
>>> > > I have fence_ilo3 command on my hypervisor host.
>>> >
>>> > did you try choosing ipmilan and passing options of
>>> > lanplus,power_wait=4?
>>> >
>>> >
>>> > >
>>> > > When I run it with following options:
>>> > > privlvl=user
>>> > > ipaddr=192.168.10.103
>>> > > login=fence_ilo
>>> > > passwd=********
>>> > > operation=status
>>> > >
>>> > > it print: Getting status of IPMI:192.168.10.103...Chassis
>>> > > power =
>>> > > On
>>> > > Done
>>> > >
>>> > > oVirt Engine Version: 3.1.0-2.fc17
>>> > >
>>> > >
>>> > > - -
>>> > > Dmitriy Pyryakov
>>> > > VimpelCom Ltd.
>>> > >
>>> > >
>>> > > Inactive hide details for Itamar Heim ---10.09.2012
>>> > > 14:28:19---On
>>> > > 09/10/2012 06:17 AM, Dmitriy A Pyryakov wrote: >
>>> > > Hello,Itamar
>>> > > Heim
>>> > > ---10.09.2012 14:28:19---On 09/10/2012 06:17 AM, Dmitriy A
>>> > > Pyryakov
>>> > > wrote: > Hello,
>>> > >
>>> > > От: Itamar Heim <iheim(a)redhat.com>
>>> > > Кому: Dmitriy A Pyryakov <DPyryakov(a)ekb.beeline.ru>
>>> > > Копия: users(a)ovirt.org, Eli Mesika <emesika(a)redhat.com>
>>> > > Дата: 10.09.2012 14:28
>>> > > Тема: Re: [Users] HP Integrated Lights Out 3
>>> > >
>>> ------------------------------------------------------------------------
>>> > >
>>> > >
>>> > >
>>> > > On 09/10/2012 06:17 AM, Dmitriy A Pyryakov wrote:
>>> > > > Hello,
>>> > > >
>>> > > > I need to use the HP i-lo 3 as fencing device for OOB
>>> > > > power
>>> > > > management.
>>> > > >
>>> > > > In man 8 page of fence_ipmilan I find that I must use
>>> > > > lanplus and
>>> > > > power_wait=4 options. When I insert this options in
>>> > > > "Option"
>>> > > > line
>>> > > > of
>>> > > > "Power Management" tab and press "Test"
button - test is
>>> > > > failed.
>>> > > >
>>> > > > There is the part of vdsm.log at this time:
>>> > > >
>>> > > > Thread-43892::DEBUG::2012-09-07
>>> > > > 13:14:03,094::API::1024::vds::(fenceNode)
>>> > > >
>>> > >
>>>
fenceNode(addr=192.168.10.103,port=,agent=ipmilan,user=fence_ilo,passwd=XXXX,action=status,secure=,options=)
>>> > > > Thread-43892::DEBUG::2012-09-07
>>> > > > 13:14:04,116::API::1050::vds::(fenceNode) rc 1 in
>>> > > > agent=fence_ipmilan
>>> > > > ipaddr=192.168.10.103
>>> > > > login=fence_ilo
>>> > > > option=status
>>> > > > passwd=XXXX
>>> > > > out Getting status of IPMI:192.168.10.103...Chassis power
>>> > > > =
>>> > > > Unknown
>>> > > > Failed
>>> > > > err
>>> > > >
>>> > > > My otions are not presented. It looks like a bug.
>>> > > >
>>> > > > How can I fix it? How can I find a location of the script
>>> > > > who run
>>> > > > this
>>> > > > test in my system?
>>> > >
>>> > > strange, i thought we added ilo3 fence type back in 3.0
>>> > > which
>>> > > wraps
>>> > > ipmilan with lanplus,power_wait=4.
>>> > > don'y you see ilo3 as an option?
>>> > >
>>> > > >
>>> > > > - -
>>> > > > Dmitriy Pyryakov
>>> > > >
>>> > > > VimpelCom Ltd.
>>> > > >
>>> > > >
>>> > > >
>>> > > > _______________________________________________
>>> > > > Users mailing list
>>> > > > Users(a)ovirt.org
>>> > > >
http://lists.ovirt.org/mailman/listinfo/users
>>> > > >
>>> > >
>>> > >
>>> > >
>>> >
>>> >
>>> >
>>> >
>>>
>>
>>
>>