I have a hypervisor with nic bonding in place and it has some communication issues. It constantly goes up and down and into non operational mode but comes back up. Is there a fix for this? Using Mode 4 for bonding. Eric Evans Digital Data Services LLC. 304.660.9080 -----Original Message----- From: clam2718@gmail.com <clam2718@gmail.com> Sent: Wednesday, February 05, 2020 12:48 PM To: users@ovirt.org Subject: [ovirt-users] Re: Deploy Hosted Engine fails at "Set VLAN ID at datacenter level" Thank you Guillaume! My mistake. Resolved. I am now having further issues I believe to be because I am using tagged VLANs with NIC teaming. It appears that teaming is not well supported in oVirt - is that accurate, and that I should rebuild using bonds. If you have any experience to shed light on this it is much appreciated. [ INFO ] TASK [ovirt.hosted_engine_setup : Fail with error description] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The host has been set in non_operational status, deployment errors: code 505: Host fmov1n1.bcn.dtcorp.com installation failed. Failed to configure management network on the host., code 9000: Failed to verify Power Management configuration for Host fmov1n1.bcn.dtcorp.com., fix accordingly and re-deploy."} Thanks so very much, Charles _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/LPUANZALZ7L5ZC...