12:56 p.m.
Hi oVirt land
Hope you are well. Running into this issue, I hope you can help.
Centos7 and it is updated.
Ovirt 4.3, latest packages.
My network config:
[root@mob-r1-d-ovirt-aa-1-01 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens1f0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master
bond0 state UP group default qlen 1000
link/ether 00:90:fa:c2:d2:48 brd ff:ff:ff:ff:ff:ff
3: ens1f1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master
bond0 state UP group default qlen 1000
link/ether 00:90:fa:c2:d2:48 brd ff:ff:ff:ff:ff:ff
4: enp11s0f0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state
DOWN group default qlen 1000
link/ether 00:90:fa:c2:d2:50 brd ff:ff:ff:ff:ff:ff
5: enp11s0f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state
DOWN group default qlen 1000
link/ether 00:90:fa:c2:d2:54 brd ff:ff:ff:ff:ff:ff
21: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP group default qlen 1000
link/ether 00:90:fa:c2:d2:48 brd ff:ff:ff:ff:ff:ff
inet6 fe80::290:faff:fec2:d248/64 scope link
valid_lft forever preferred_lft forever
22: bond0.1131@bond0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
noqueue state UP group default qlen 1000
link/ether 00:90:fa:c2:d2:48 brd ff:ff:ff:ff:ff:ff
inet 172.18.206.184/23 brd 172.18.207.255 scope global bond0.1131
valid_lft forever preferred_lft forever
inet6 fe80::290:faff:fec2:d248/64 scope link
valid_lft forever preferred_lft forever
[root@mob-r1-d-ovirt-aa-1-01 network-scripts]# cat ifcfg-bond0
BONDING_OPTS='mode=1 miimon=100'
TYPE=Bond
BONDING_MASTER=yes
PROXY_METHOD=none
BROWSER_ONLY=no
IPV6INIT=no
NAME=bond0
UUID=c11ef6ef-794f-4683-a068-d6338e5c19b6
DEVICE=bond0
ONBOOT=yes
[root@mob-r1-d-ovirt-aa-1-01 network-scripts]# cat ifcfg-bond0.1131
DEVICE=bond0.1131
VLAN=yes
ONBOOT=yes
MTU=1500
IPADDR=172.18.206.184
NETMASK=255.255.254.0
GATEWAY=172.18.206.1
BOOTPROTO=none
MTU=1500
DEFROUTE=yes
NM_CONTROLLED=no
IPV6INIT=yes
DNS1=172.20.150.10
DNS2=172.20.150.11
I get the following error:
[ INFO ] TASK [ovirt.hosted_engine_setup : Generate output list]
[ INFO ] ok: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Validate selected bridge
interface if management bridge does not exists]
[ INFO ] skipping: [localhost]
Please indicate a nic to set ovirtmgmt bridge on: (bond0,
bond0.1131) [bond0.1131]:
Please specify which way the network connectivity should be
checked (ping, dns, tcp, none) [dns]:
..
..
..
..
..
[ INFO ] ok: [localhost]
[ INFO ] TASK [ovirt.hosted_engine_setup : Validate selected bridge
interface if management bridge does not exists]
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg":
"The
selected network interface is not valid"}
[ ERROR ] Failed to execute stage 'Closing up': Failed executing
ansible-playbook
[ INFO ] Stage: Clean up
And if I create the ifcfg-ovirtmgmt as a bridge it fails later.
What is the correct network setup for my bond configuration to do a self
hosted-engine setup ?
Regards
Nar