Re: [Users] Unable to login into console Spice VNC anyone?

I have seen this. Can give it a try. At this point I'm not sure if it's a problem with my configuration. Or making console connections with either vnc or spice. The ports are clearly running - netstat -an|grep 590 tcp 0 0 0.0.0.0:5900 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:5901 0.0.0.0:* LISTEN When using plain old kvm, virt-manager I could just simply connect using any vnc or virt-viewer or x11 virtmanager. I'm not sure what ovirt is doing with tls etc...

Not being able to get console access is a definite show stopper. And it shouldn't be rocket science to do it. And it should be accessible from either linux or windows clients. Does vSphere (windows only) ring a bell? On Wed, Jul 25, 2012 at 1:09 PM, Itamar Heim <iheim(a)redhat.com&gt; wrote: > > would it be relevant for you to try the 3.1 beta? > it has this which should cover your 'all in one' needs: > http://www.ovirt.org/wiki/Feature/AllInOne > > > > On 07/25/2012 06:52 PM, Brent Bolin wrote: >> >> Thanks David for your reply - >> >> I have completely flushed all iptables rules 'iptables --flush" - >> >> iptables -L -v -n >> Chain INPUT (policy ACCEPT 1775K packets, 627M bytes) >> pkts bytes target prot opt in out source >> destination >> >> Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) >> pkts bytes target prot opt in out source >> destination >> >> Chain OUTPUT (policy ACCEPT 1754K packets, 589M bytes) >> pkts bytes target prot opt in out source >> destination >> >> >> The base host is Fedora 16 running with desktop >> >> First installed vdsm and then ovirt-engine >> >> Single network bridge installed, but there is another 1GB nic that isn't >> being used - >> >> eth0 Link encap:Ethernet HWaddr 00:1B:21:7D:ED:4A >> inet6 addr: fe80::21b:21ff:fe7d:ed4a/64 Scope:Link >> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >> RX packets:99656 errors:0 dropped:0 overruns:0 frame:0 >> TX packets:51508 errors:0 dropped:0 overruns:0 carrier:0 >> collisions:0 txqueuelen:1000 >> RX bytes:63007897 (60.0 MiB) TX bytes:18148736 (17.3 MiB) >> >> lo Link encap:Local Loopback >> inet addr:127.0.0.1 Mask:255.0.0.0 >> inet6 addr: ::1/128 Scope:Host >> UP LOOPBACK RUNNING MTU:16436 Metric:1 >> RX packets:1814674 errors:0 dropped:0 overruns:0 frame:0 >> TX packets:1814674 errors:0 dropped:0 overruns:0 carrier:0 >> collisions:0 txqueuelen:0 >> RX bytes:646274067 (616.3 MiB) TX bytes:646274067 (616.3 MiB) >> >> ovirtmgmt Link encap:Ethernet HWaddr 00:1B:21:7D:ED:4A >> inet addr:192.168.0.118 Bcast:192.168.0.255 Mask:255.255.255.0 >> inet6 addr: fe80::21b:21ff:fe7d:ed4a/64 Scope:Link >> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >> RX packets:70706 errors:0 dropped:0 overruns:0 frame:0 >> TX packets:48717 errors:0 dropped:0 overruns:0 carrier:0 >> collisions:0 txqueuelen:0 >> RX bytes:52195637 (49.7 MiB) TX bytes:14942359 (14.2 MiB) >> >> vnet0 Link encap:Ethernet HWaddr FE:1A:4A:A8:00:00 >> inet6 addr: fe80::fc1a:4aff:fea8:0/64 Scope:Link >> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >> RX packets:3 errors:0 dropped:0 overruns:0 frame:0 >> TX packets:14 errors:0 dropped:0 overruns:1 carrier:0 >> collisions:0 txqueuelen:500 >> RX bytes:1299 (1.2 KiB) TX bytes:2760 (2.6 KiB) >> >> After ovirt engine is installed logged into the interface and configured >> the host using 127.0.0.1 . Host reboots. Host shows up in the admin >> interface only complaining about power management that isn't configured. >> >> >> Here >> <https://picasaweb.google.com/lh/photo/3vclaT_6d3uy2QODU6xp_zyLvDWH8k_pPWn... >> >> is a screen shot of the web interface >> >> The only configuration settings I've changed are in the qemu.conf to >> either tls=0 or tls=1 >> >> spice-gtk-0.11-4.fc16.x86_64 >> spice-client-0.10.1-1.fc16.x86_64 >> spice-glib-0.11-4.fc16.x86_64 >> spice-gtk3-0.11-4.fc16.x86_64 >> spice-xpi-2.7-3.fc16.x86_64 >> spice-gtk-tools-0.11-4.fc16.x86_64 >> spice-server-0.10.1-1.fc16.x86_64 >> >> The link in the admin interface shows available(using FF). When I click >> it opens a spicec:0 dialog and just closes >> >> If I try to open from a shell I get things like this - >> >> Brief window open and then error - >> >> spicec -h 127.0.0.1 -p 5900 >> Warning: connect error 5 - need secured connection >> >> >> >> >> >> >> >> On Wed, Jul 25, 2012 at 10:04 AM, David Jaša <djasa(a)redhat.com >> <mailto:djasa@redhat.com>> wrote: >> > Hi Brent, >> > >> > first guess: have a look if your iptables setup allow connection to the >> > qemu processes. RHEV 3.0 documentation (publicly accesible) says that a >> > host needs these ports open: >> > port 22 for SSH, >> > ports 5634 to 6166 for guest console connections, >> > port 16514 for libvirt virtual machine migration traffic, >> > ports 49152 to 49216 for VDSM virtual machine migration traffic, >> > and >> > port 54321 for the Red Hat Enterprise Virtualization Manager. >> > >> > If you have ovirt-engine running onu the same machine as vdsm, most of >> > the ports don't need to be accessible from outside but "guest console" >> > ports do. >> > >> > If it isn't iptables, please share at least: >> > * what your actual topology is (engine on the physical host?) >> > * if you use some custom tls settings such as tls switched off >> > * what spice client & xpi versions are you using >> > * how exactly the client failed (showed error window? with what error? >> > just didn't launch?) >> > >> > In your email, you didn't write any debugging hints apart from the setup >> > being single-host one... >> > >> > David >> > >> > >> > Brent Bolin píše v St 25. 07. 2012 v 09:00 -0500: >> >> About 6 months ago I asked on this list if it was possible to install >> >> ovirt on a single host. Thread got long and winded and lost interest. >> >> >> >> Started looking at the project again about two days ago. What I >> >> really didn't understand was using a base Fedora install. Installing >> >> vdsm and then installing ovirt engine. >> >> >> >> So everything is up. Created data center, storage, cluster, host and >> >> virtual machine. >> >> >> >> But I can't get there from here. I can't get console running to >> >> configure the booted install. >> >> >> >> I've tried VNC, Spice, Firefox with spice-xpi plugin. >> >> >> >> Tried tweaking, turning, touching, swearing @ /etc/libvirt/qemu.conf >> >> settings. tls settings. Not even sure if this is the right place to >> >> be checking. >> >> >> >> This is a show stopper. >> >> >> >> LSB Version: :core-4.0-amd64:core-4.0-noarch >> >> Distributor ID: Fedora >> >> Description: Fedora release 16 (Verne) >> >> Release: 16 >> >> Codename: Verne >> >> >> >> [root@ovirt # rpm -qa|grep ovirt-engine >> >> ovirt-engine-3.0.0_0001-1.6.fc16.x86_64 >> >> ovirt-engine-log-collector-3.0.0_0001-1.6.fc16.x86_64 >> >> ovirt-engine-iso-uploader-3.0.0_0001-1.6.fc16.x86_64 >> >> ovirt-engine-backend-3.0.0_0001-1.6.fc16.x86_64 >> >> ovirt-engine-notification-service-3.0.0_0001-1.6.fc16.x86_64 >> >> ovirt-engine-jboss-deps-3.0.0_0001-1.6.fc16.x86_64 >> >> ovirt-engine-tools-common-3.0.0_0001-1.6.fc16.x86_64 >> >> ovirt-engine-dbscripts-3.0.0_0001-1.6.fc16.x86_64 >> >> ovirt-engine-setup-3.0.0_0001-1.6.fc16.x86_64 >> >> ovirt-engine-jbossas-1.2-2.fc16.x86_64 >> >> ovirt-engine-userportal-3.0.0_0001-1.6.fc16.x86_64 >> >> ovirt-engine-restapi-3.0.0_0001-1.6.fc16.x86_64 >> >> ovirt-engine-genericapi-3.0.0_0001-1.6.fc16.x86_64 >> >> ovirt-engine-config-3.0.0_0001-1.6.fc16.x86_64 >> >> ovirt-engine-webadmin-portal-3.0.0_0001-1.6.fc16.x86_64 >> >> >> >> Any input would be appreciated >> >> _______________________________________________ >> >> Users mailing list >> >> Users(a)ovirt.org <mailto:Users@ovirt.org> >> >> >> http://lists.ovirt.org/mailman/listinfo/users >> > >> > -- >> > >> > David Jaša, RHCE >> > >> > SPICE QE based in Brno >> > GPG Key: 22C33E24 >> > Fingerprint: 513A 060B D1B4 2A72 7F0D 0278 B125 CD00 22C3 3E24 >> > >> > >> > >> >> >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> > > _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users