Re: [ovirt-users] Hosted-engine-Issue

HI Any updates issue is blocking ? Thanks, Nagaraju On Thu, Apr 21, 2016 at 7:20 PM, Budur Nagaraju <nbudoor(a)gmail.com&gt; wrote: > Below are the details, unable to ping the gateway from the ovirt engine > ,able to ping the ovirt engine from host as both are there in the same > network. > > > [root@oe ~]# ip addr > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > inet 127.0.0.1/8 scope host lo > inet6 ::1/128 scope host > valid_lft forever preferred_lft forever > 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast > state UP qlen 1000 > link/ether 00:16:3e:33:38:e5 brd ff:ff:ff:ff:ff:ff > inet 10.206.66.9/23 brd 10.206.67.255 scope global eth0 > inet6 fe80::216:3eff:fe33:38e5/64 scope link > valid_lft forever preferred_lft forever > [root@oe ~]# > [root@oe ~]# > [root@oe ~]# > [root@oe ~]# ip route > 10.206.66.0/23 dev eth0 proto kernel scope link src 10.206.66.9 > 169.254.0.0/16 dev eth0 scope link metric 1002 > default via 10.206.67.254 dev eth0 > [root@oe ~]# > [root@oe ~]# > [root@oe ~]# > [root@oe ~]# brctl show > bridge name bridge id STP enabled interfaces > [root@oe ~]# > > > > > > > On Thu, Apr 21, 2016 at 4:51 PM, Yedidyah Bar David <didi(a)redhat.com&gt; > wrote: > >> On Thu, Apr 21, 2016 at 1:39 PM, Budur Nagaraju <nbudoor(a)gmail.com&gt; >> wrote: >> > HI >> > >> > Installed hosted engine and after configuring IP to ovirt engine >> unable to >> > ping the gateway and found that there is no issue with the Network . >> >> You mean that from inside the engine machine, you cannot ping the >> gateway? >> >> Can you ping it from the host? >> >> Please share output of these commands, from both the host and the engine >> vm: >> >> ip addr >> ip route >> brctl show >> >> Thanks, >> >> > >> > Is there any thing am missing while installing Hosted engine ? below >> is >> > output details, >> > >> > >> > --== CONFIGURATION PREVIEW ==-- >> > >> > Engine FQDN : oe.bnglab.psecure.net >> > Bridge name : ovirtmgmt >> > SSH daemon port : 22 >> > Gateway address : 10.206.67.254 >> > Host name for web application : hosted_engine_1 >> > Host ID : 1 >> > Image alias : hosted_engine >> > Image size GB : 25 >> > Storage connection : 10.204.207.152: >> /home/heoe >> > Console type : vnc >> > Memory size MB : 4096 >> > MAC address : 00:16:3e:2f:5c:40 >> > Boot type : cdrom >> > Number of CPUs : 2 >> > ISO image (for cdrom boot) : >> > /ovirt/CentOS-6.7-x86_64-minimal.iso >> > CPU Type : model_SandyBridge >> > >> > Please confirm installation settings (Yes, No)[Yes]: yes >> > [ INFO ] Stage: Transaction setup >> > [ INFO ] Stage: Misc configuration >> > [ INFO ] Stage: Package installation >> > [ INFO ] Stage: Misc configuration >> > [ INFO ] Configuring libvirt >> > [ INFO ] Configuring VDSM >> > [ INFO ] Starting vdsmd >> > [ INFO ] Waiting for VDSM hardware info >> > [ INFO ] Waiting for VDSM hardware info >> > [ INFO ] Creating Storage Domain >> > [ INFO ] Creating Storage Pool >> > [ INFO ] Connecting Storage Pool >> > [ INFO ] Verifying sanlock lockspace initialization >> > [ INFO ] Creating VM Image >> > [ INFO ] Disconnecting Storage Pool >> > [ INFO ] Start monitoring domain >> > [ INFO ] Configuring VM >> > [ INFO ] Updating hosted-engine configuration >> > [ INFO ] Stage: Transaction commit >> > [ INFO ] Stage: Closing up >> > The following network ports should be opened: >> > tcp:5900 >> > tcp:5901 >> > udp:5900 >> > udp:5901 >> > An example of the required configuration for iptables can be >> found >> > at: >> > /etc/ovirt-hosted-engine/iptables.example >> > In order to configure firewalld, copy the files from >> > /etc/ovirt-hosted-engine/firewalld to /etc/firewalld/services >> > and execute the following commands: >> > firewall-cmd -service hosted-console >> > [ INFO ] Creating VM >> > You can now connect to the VM with the following command: >> > /usr/bin/remote-viewer vnc://localhost:5900 >> > Use temporary password "2049ZfXr" to connect to vnc console. >> > Please note that in order to use remote-viewer you need to >> be able >> > to run graphical applications. >> > This means that if you are using ssh you have to supply the >> -Y >> > flag (enables trusted X11 forwarding). >> > Otherwise you can run the command from a terminal in your >> > preferred desktop environment. >> > If you cannot run graphical applications you can connect to >> the >> > graphic console from another host or connect to the console using the >> > following command: >> > virsh -c qemu+tls://Test/system console HostedEngine >> > If you need to reboot the VM you will need to start it >> manually >> > using the command: >> > hosted-engine --vm-start >> > You can then set a temporary password using the command: >> > hosted-engine --add-console-password >> > The VM has been started. Install the OS and shut down or >> reboot >> > it. To continue please make a selection: >> > >> > (1) Continue setup - VM installation is complete >> > (2) Reboot the VM and restart installation >> > (3) Abort setup >> > (4) Destroy VM and abort setup >> > >> > _______________________________________________ >> > Users mailing list >> > Users(a)ovirt.org >> > http://lists.ovirt.org/mailman/listinfo/users >> > >> >> >> >> -- >> Didi >> > >