On 10/01/2014 02:39 PM, Daniel Helgenberger wrote:
On 01.10.2014 13:33, Jiri Moskovcak wrote:
> On 10/01/2014 01:17 PM, Daniel Helgenberger wrote:
>> Hello Jirka,
>> On 01.10.2014 09:10, Jiri Moskovcak wrote:
>>> Hi Daniel,
>>> from the logs it seems like you ran into [1]. It should be fixed in
>>> ovirt-hosted-engine-ha-1.1.5 (part of oVirt 3.4.2).
>> I am running 3.4.4 - and from hosted-engine --vm-status both hosts had a
>> score of 2400...
> - doesn't seem like it from the logs, I can see the transition from
> EngineStart to EngineUp and directly to EngineUpBadHealth, if you have
> the latest version it should go to the EngineStarting before it's
> EngineUp, are you sure you've restarted the services (broker and agent)
> after update? Please provide output of rpm -q ovirt-hosted-engine-ha.
here you go:
rpm -q ovirt-hosted-engine-ha
ovirt-hosted-engine-ha-1.1.5-1.el6.noarch
also, I upgraded to 3.4.3 prior to 3.4.4. I cannot recall whatevter I
restarted ovirt-ha-agent; but it is highly likely. Here system reboots
after kernel updates:
reboot system boot 2.6.32-431.29.2. Tue Sep 30 21:46 - 14:36 (16:50)
reboot system boot 2.6.32-431.29.2. Mon Sep 29 12:19 - 21:44 (1+09:24)
reboot system boot 2.6.32-431.29.2. Fri Sep 12 08:47 - 12:17 (17+03:30)
reboot system boot 2.6.32-431.20.3. Mon Sep 1 17:48 - 08:44 (10+14:56)
ok, so please just to be 100% sure, check the version on both hosts (it
should be >= 1.1.5) and restart broker and agent and then try to
reproduce the problem. I went thru the code in 1.1.5 and I don't see any
code path which could take the agent from EngineStart to EngineUp
without going thru the EngineStarting state - this was the behavior
prior 1.1.5.
Regards,
Jirka
>
> Thanks,
> Jirka
>
>>> --Jirka
>>>
>>> [1]
https://bugzilla.redhat.com/show_bug.cgi?id=1093366
>>>
>>> On 09/27/2014 12:40 PM, Daniel Helgenberger wrote:
>>>> Hello,
>>>>
>>>> before filing a BZ against 3.4 branch I wanted to get some input on the
>>>> following issue:
>>>>
>>>> Steps, root shell on one engine-ha hosts, using hosted-engine cmd:
>>>> 1. set global maintenance
>>>> 2. shutdown hosted-engine vm
>>>> (do some work)
>>>> 3. disable global maintenance
>>>>
>>>> Result: My engine was started and immediately powered down again, in a
loop.
>>>> I could only manually brake this with:
>>>> 1. enable global mt. gain
>>>> 2. start engine
>>>> 3. disable global mt.
>>>>
>>>> I attached the hosts' engine-ha broker logs as well as agent logs,
from
>>>> today 12:00 to 12:27, right after I 'fixed' this.
>>>> Note, the engine was started on nodehv02 automatically after i disabled
>>>> global mt. @ about 12:05
>>>>
>>>> Thanks
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users(a)ovirt.org
>>>>
http://lists.ovirt.org/mailman/listinfo/users
>>>>
>