Hi Antoni, Please find the attached screen shots... Thanks, Punit On Wed, Jul 30, 2014 at 5:19 PM, Antoni Segura Puimedon <asegurap@redhat.com
wrote:
----- Original Message -----
From: "Punit Dambiwal" <hypunit@gmail.com> To: "Sahina Bose" <sabose@redhat.com> Cc: "Dan Kenigsberg" <danken@redhat.com>, barumuga@redhat.com, users@ovirt.org, "Itamar Heim" <iheim@redhat.com>, "Michal Skrivanek" <michal.skrivanek@redhat.com>, "Antoni Segura Puimedon" <asegurap@redhat.com>, "Sven Kieske" <S.Kieske@mittwald.de>, "Frantisek Kobzik" <fkobzik@redhat.com>, ahadas@redhat.com Sent: Wednesday, July 30, 2014 10:46:47 AM Subject: Re: Network Question
Hi All,
I am using the storage ip to mount the glusterfs to host...that means the data communication should be run on this network but it's not....it's running on the ovirtmgmt network...
Could you please attach the ip addresses of the gluster nodes, and the result of doing:
(on the vdsm host)
ip rule show ip route show table (add here each of the tables that show up in the previous command)
[image: Inline image 1]
On Wed, Jul 30, 2014 at 4:26 PM, Sahina Bose <sabose@redhat.com> wrote:
On 07/30/2014 01:21 PM, Dan Kenigsberg wrote:
On Wed, Jul 30, 2014 at 01:04:48PM +0800, Punit Dambiwal wrote:
Hi,
I am facing one strange problem with Ovirt network...i have the below network in my ovirt cluster :-
eth0+eth1=bond0
bond0.10= ovirtmgmt (43.250.X.X) bond0.37= VMnetwork
eth2+eth3=bond1 (Storage) (10.10.10.X)
Glusterfs running on 4 HV's with each have 2 bricks...
But still the glusterfs data transfer from ovirtmgmt network instead
storage network ?? Is there any more setting required to change it to ovirtmgmt to storage ??
The title "Storage" means nothing to oVirt per se. The user needs to make sure that her NFS or iSCSI storage server uses the specific network. But unfortunately - and Bala is welcome to correct me if I'm wrong -
of there
is no means to set the IP address which gluster uses via oVirt.
Can it be done "underneath" oVirt?
For glusterd communication - that is gluster peer to gluster peer - there's a workaround to achieve this..Please see http://lists.ovirt.org/ pipermail/users/2014-February/021213.html
For VM to gluster host, the host IP used to mount the volume is the one used for communication by oVirt.
