Hi Itamar,
Yes, I see what you mean. What I can do is like this on three different
machines:
Browser (M1) ------------- Ovirt-engine (M2) ---------------- Ovirt-node
stateless (M3)
I can see the ovirt-engine GUI in the Browser on M1. But I can't login
either the User Portal or Admin Portal. This is my first time to use
the GUI. My basic engine-setup on M2 is like this:
--== CONFIGURATION PREVIEW ==--
Database name : engine
Database secured connection : False
Database host : localhost
Database user name : engine
Database host name validation : False
Datbase port : 5432
NFS setup : True
NFS mount point : /var/lib/exports/iso
Configure WebSocket Proxy : True
Host FQDN : vm3
Set application as default page : True
Configure Apache SSL : True
Did I miss setting a user and an admin login name/pwd?
when you run engine-setup, one of the questions is for you to specify
the admin@internal admin password?
you can reset it using engine-config utility and set AdminPassword key.
David
------------------------------------------------------------------------
*From:* Itamar Heim <iheim(a)redhat.com>
*To:* David Li <david_li(a)sbcglobal.net>; "users(a)ovirt.org"
<users(a)ovirt.org>
*Sent:* Thursday, December 19, 2013 1:32 PM
*Subject:* Re: [Users] What parameters to use in automated node
install to enable engine CLI register?
On 12/19/2013 01:32 PM, David Li wrote:
> Hi Itamar,
>
>
> Unfortunately I am restricted to using CLI on the machine running the
> engine. Is there any way to use ovirt CLI to do this?
you can't browse the engine from another machine to use its gui?
yes, you can do everything from the cli, to begin with, try to connect
with it to the engine and get the list of hosts.
>
> David
>
>
------------------------------------------------------------------------
> *From:* Itamar Heim <iheim(a)redhat.com
<mailto:iheim@redhat.com>>
> *To:* David Li <david_li(a)sbcglobal.net
<mailto:david_li@sbcglobal.net>>; "users(a)ovirt.org
<mailto:users@ovirt.org>"
> <users(a)ovirt.org <mailto:users@ovirt.org>>
> *Sent:* Wednesday, December 18, 2013 5:31 PM
> *Subject:* Re: [Users] What parameters to use in automated node
> install to enable engine CLI register?
>
> On 12/18/2013 04:33 PM, David Li wrote:
> > I am still confused. My ovirt shell cli is in
"disconnected" mode
> like this:
> >
> > [oVirt shell (disconnected)]#
> > [oVirt shell (disconnected)]#
> > [oVirt shell (disconnected)]#
> >
> >
> > The only commands I can use are connect, exit and help.
How do I
> see my
> > node? Or maybe the question is if the parameters I
provided to the
> > kernel boot options have indeed enabled the node to
register with the
> > engine. But again I have no way to know this. Is there a
log on
> the node
> > side that might give me some clues?
>
> well, to begin with, do you see the node in the engine via the
> webadmin gui?
>
> >
> > David
> >
> >
>
------------------------------------------------------------------------
> > *From:* Itamar Heim <iheim(a)redhat.com
<mailto:iheim@redhat.com> <mailto:iheim@redhat.com
<mailto:iheim@redhat.com>>>
> > *To:* David Li <david_li(a)sbcglobal.net
<mailto:david_li@sbcglobal.net>
> <mailto:david_li@sbcglobal.net
<mailto:david_li@sbcglobal.net>>>; "users(a)ovirt.org
<mailto:users@ovirt.org>
> <mailto:users@ovirt.org <mailto:users@ovirt.org>>"
> > <users(a)ovirt.org <mailto:users@ovirt.org>
<mailto:users@ovirt.org <mailto:users@ovirt.org>>>
> > *Sent:* Wednesday, December 18, 2013 12:04 PM
> > *Subject:* Re: [Users] What parameters to use in
automated node
> > install to enable engine CLI register?
> >
> > On 12/18/2013 10:39 AM, David Li wrote:
> > > Hi Itamar,
> > >
> > > I am not sure I understand the question.
> > > How can I see the node from over-shell CLI if it's not
> connected
> > to it?
> > > Are you refering to some CLI cmd that allows me to
do this?
> >
> >
> > if you PXE boot the node to register to the engine, it will
> register
> > itself in the engine, so the ovirt-shell can "see it"
and
> approve it.
> >
> > note you can also just add the ovirt-node directly from the
> engine (via
> > the gui/cli/api/sdk without the node registering (you would
> need to
> > know
> > set in the node the root password (for ssh) or the
engine ssh
> key for
> > this to be able to add the node without registering it
first.
> > if you register it, it will also get the engine ssh key
as part of
> > registration)
> >
> > >
> > > David
> > >
> > >
> >
>
------------------------------------------------------------------------
> > > *From:* Itamar Heim <iheim(a)redhat.com
<mailto:iheim@redhat.com>
> <mailto:iheim@redhat.com <mailto:iheim@redhat.com>>
<mailto:iheim@redhat.com <mailto:iheim@redhat.com>
> <mailto:iheim@redhat.com <mailto:iheim@redhat.com>>>>
> > > *To:* David Li <david_li(a)sbcglobal.net
<mailto:david_li@sbcglobal.net>
> <mailto:david_li@sbcglobal.net <mailto:david_li@sbcglobal.net>>
> > <mailto:david_li@sbcglobal.net
<mailto:david_li@sbcglobal.net>
> <mailto:david_li@sbcglobal.net
<mailto:david_li@sbcglobal.net>>>>; "users(a)ovirt.org
<mailto:users@ovirt.org>
> <mailto:users@ovirt.org <mailto:users@ovirt.org>>
> > <mailto:users@ovirt.org <mailto:users@ovirt.org>
<mailto:users@ovirt.org <mailto:users@ovirt.org>>>"
> > > <users(a)ovirt.org <mailto:users@ovirt.org>
<mailto:users@ovirt.org <mailto:users@ovirt.org>>
> <mailto:users@ovirt.org <mailto:users@ovirt.org>
<mailto:users@ovirt.org <mailto:users@ovirt.org>>>>
> > > *Sent:* Wednesday, December 18, 2013 1:17 AM
> > > *Subject:* Re: [Users] What parameters to use in
> automated node
> > > install to enable engine CLI register?
> > >
> > > On 12/17/2013 05:59 PM, David Li wrote:
> > > > Hi,
> > > >
> > > >
> > > > My node install followed the automatic install
> instructions in
> > > >
> > > >
> > >
> >
>
https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Vir...
> > > >
> > > >
> > > > For the kernel boot parameters, I used
> > > >
> > > > management_server=<my machine IP running ovirt-shell
> CLI>
> > > > rhevm_admin_password=xyz
> > > >
> > >
> > > do you see the node in pending approval state in the
> engine?'
> > >
> > >
> > > > However I see a few problems when I tried to use
> > ovirt-shell CLI to
> > > > connect to the engine.
> > > >
> > > > [oVirt shell (disconnected)]# connect --url
> > > "http://<node-IP>:8080/api"
> > > > --username "admin" --password
"xyz"
> > >
> > > ovirt-shell is to engine to approve the node,
not to node
> > directly.
> > >
> > > >
> > > >
> > > > 1. Though I can ping the node, but this cmd gave
> errors:
> > error:
> > > [Errno
> > > > 113] No route to host
> > > > 2. What should I use for "--username"
argument?
> What is
> > "@domain"?
> > > >
> > > > David
> > > >
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > Users mailing list
> > > > Users(a)ovirt.org <mailto:Users@ovirt.org>
<mailto:Users@ovirt.org <mailto:Users@ovirt.org>>
> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>
<mailto:Users@ovirt.org <mailto:Users@ovirt.org>>>
> > <mailto:Users@ovirt.org <mailto:Users@ovirt.org>
<mailto:Users@ovirt.org <mailto:Users@ovirt.org>>
> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>
<mailto:Users@ovirt.org <mailto:Users@ovirt.org>>>>
> > > >
http://lists.ovirt.org/mailman/listinfo/users
> > > >
> > >
> > >
> > >
> >
> >
> >
>
>
>