Same here… I am using Dell R710s with 8 disks, 2 x 1TB in RAID 0 and then 6 virtual
disks, one per physical disks. I think you have to do it that way for the dell perc
controller to present the disk to the OS but I haven’t actually tried not doing that so
not sure.. anyway this works.
This has been very informative.
James has only 3 nodes, but I have 5… I have another posting about what happens when I
added the two additional nodes as all the disks seem to be locked and multipath and I
can’t create bricks on them.
But, once I get pas that problem, if I have 5 nodes, and I am going to create replica
datasttores with 3 disks, do I just 3 nodes for each datastore? Is there any best
practice for creating datastores on any 3 nodes…
Perhaps an example:
Datastore 1 - Node1, Node2, Node3 /dev/sdb
Datastore 2 – Node2, Node3 /dev/sdc Node4 /dev/sdb
Datastore 3 - Node3, /dev/sdd, Node4 /dev/sdc Node5 /dev/sda
Does that make sense? Or is there a better way?
Thanks to everyone for helping me on this, much appreciated.
Bill
From: Jayme [mailto:jaymef@gmail.com]
Sent: Monday, July 30, 2018 8:12 AM
To: femi adegoke <ovirt(a)fateknollogee.com>
Cc: users <users(a)ovirt.org>
Subject: [ovirt-users] Re: up and running with ovirt 4.2 and gluster
Hello,
In my case I'm referring to hosts with internal disks.
Example of my hardware config:
host0:
2x250GB SSDs in RAID 1 mirror for OS/boot disk
2x2TB SSDs in JBOD (passthrough) represented as separate disks in the OS ex. /dev/sda and
/dev/sdb
host1 and host2 have identical configurations.
- Jayme
On Mon, Jul 30, 2018 at 11:08 AM, femi adegoke <ovirt(a)fateknollogee.com
<mailto:ovirt@fateknollogee.com> > wrote:
@jayme
@william.dossett
When you say "JBOD", are these hosts with xx number of disks or hosts with a
physically attached JBOD?
_______________________________________________
Users mailing list -- users(a)ovirt.org <mailto:users@ovirt.org>
To unsubscribe send an email to users-leave(a)ovirt.org <mailto:users-leave@ovirt.org>
Privacy Statement:
https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/MWGC54O3OYM...