2:56 p.m.
Hi Doug,
Thanks, you're welcome!
It's generally possible to add persistent rules by either using the legacy
/etc/rc.d/rc.local boot script (chmod +x /etc/rc.d/rc.local and put the
relevant commands at the end of the file, that way you can actually run any
commands) or by using the /etc/sysconfig/network-scripts/rule-<interface
name> e.g. rule-ovirtmgmt or rule-eno3 (just put in the file "to
172.22.20.31 priority 32764" - without quotes), however of course this
needs to be tested to verify that it works.
I forwarded the issue to the network team and hopefully they will update
soon.
Thanks in advance,
On Tue, Feb 12, 2019 at 10:17 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com>
wrote:
Lev,
You have no idea how helpful you have been!!!!!! I’ve been having this
issue for over 2 months and starting to cause major problems.
Please let me know if you find a better solution. I’m going to wait to
hear back from you before implementing.
If we go with this workaround, is there a way to add the ip rule so it’s
persistent? I know how to make the ip route add persistent.
[image: Count On EMC] <http://www.emcins.com/>
*Doug Maxfield *| Senior Operating Systems Analyst
*EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265
Tel: 515.345.4507 | Fax: 866.331.1522
Doug.L.Maxfield(a)EMCIns.com | www.emcins.com
*From:* Lev Veyde <lveyde(a)redhat.com>
*Sent:* Tuesday, February 12, 2019 2:14 PM
*To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com>
*Cc:* users <users(a)ovirt.org>
*Subject:* Re: [ovirt-users] Creating a static route
Hi Doug,
Yes, it looks like it did.
I'll try to catch somebody from my local oVirt/RHV networking team to take
a look at this issue, maybe there is a better solution for that issue than
my workaround.
But meanwhile you can use this workaround (ip route add + ip rule add),
just please be aware that these should be run after each host reboot, since
these commands are not persistent.
Thanks in advance,
On Tue, Feb 12, 2019 at 10:07 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com>
wrote:
Lev,
Here’s the results. It appears to fix the issue!!
From non-working system:
-bash-4.2# ip rule add to 172.22.20.31 priority 32764
-bash-4.2# traceroute 172.22.20.31
traceroute to 172.22.20.31 (172.22.20.31), 30 hops max, 60 byte packets
1 CenteraAmesAN1.emcins.com (172.21.12.61) 0.487 ms 1.082 ms 1.313 ms
2 192.168.90.9 (192.168.90.9) 1.507 ms 2.090 ms 2.294 ms
3 pdputopcomm01.emcins.com (172.22.20.31) 1.403 ms 1.401 ms 1.348 ms
[image: Count On EMC] <http://www.emcins.com/>
*Doug Maxfield *| Senior Operating Systems Analyst
*EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265
Tel: 515.345.4507 | Fax: 866.331.1522
Doug.L.Maxfield(a)EMCIns.com | www.emcins.com
*From:* Lev Veyde <lveyde(a)redhat.com>
*Sent:* Tuesday, February 12, 2019 2:01 PM
*To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com>
*Cc:* users <users(a)ovirt.org>
*Subject:* Re: [ovirt-users] Creating a static route
Hi Doug,
OK, I think that I have a guess of what may have happened here...
Can you please run the following command on the (non-working) host:
ip rule add to 172.22.20.31 priority 32764
This needs to be run in addition to the ip route add ... command.
And then please run the traceroute command and let me know if that fixed
the issue.
Thanks in advance,
On Tue, Feb 12, 2019 at 9:30 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com>
wrote:
Lev,
Here you go.
From non-working system
-bash-4.2# ip rule
0: from all lookup local
32764: from all to 172.21.0.0/16 iif ovirtmgmt lookup 2887058719
32765: from 172.21.0.0/16 lookup 2887058719
32766: from all lookup main
32767: from all lookup default
From working system
[root@paputopcomm04 ~]# ip rule
0: from all lookup local
32766: from all lookup main
32767: from all lookup default
[image: Count On EMC] <http://www.emcins.com/>
*Doug Maxfield *| Senior Operating Systems Analyst
*EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265
Tel: 515.345.4507 | Fax: 866.331.1522
Doug.L.Maxfield(a)EMCIns.com | www.emcins.com
*From:* Lev Veyde <lveyde(a)redhat.com>
*Sent:* Tuesday, February 12, 2019 12:35 PM
*To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com>
*Cc:* users <users(a)ovirt.org>
*Subject:* Re: [ovirt-users] Creating a static route
Hi Doug,
That shouldn't really matter, since ovirtmgmt is just a bridged interface,
and unless I'm missing something it shouldn't really affect routing.
Can you please also provide the output of "ip rule" from both working and
non-working hosts ?
Thanks in advance,
On Tue, Feb 12, 2019 at 8:01 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com>
wrote:
Lev,
Here’s the ip route from the server that worked and didn’t work
IP Route from server that worked
[root@paputopcomm04 ~]# ip route
default via 172.21.0.250 dev eno3
169.254.0.0/16 dev eno3 scope link metric 1002
169.254.0.0/16 dev eno4 scope link metric 1005
172.17.0.0/16 dev eno4 proto kernel scope link src 172.17.53.18
172.21.0.0/16 dev eno3 proto kernel scope link src 172.21.5.34
*172.22.20.31 via 172.21.12.61 dev eno3*
172.26.0.0/16 dev eno1 proto kernel scope link src 172.26.5.34
IP Route from server that didn't work
-bash-4.2# ip route
default via 172.21.0.250 dev ovirtmgmt
169.254.0.0/16 dev eno4 scope link metric 1004
169.254.0.0/16 dev ovirtmgmt scope link metric 1021
172.17.0.0/16 dev eno4 proto kernel scope link src 172.17.53.15
172.21.0.0/16 dev ovirtmgmt proto kernel scope link src 172.21.5.31
*172.22.20.31 via 172.21.12.61 dev ovirtmgmt*
172.26.0.0/16 dev eno1 proto kernel scope link src 172.26.5.31
We have had our network team look and they don’t know. As I said, the was
setup by Commvault. It’s almost like the ovirtmgmt interface will not
allow a route add due to the way it’s configured? They, Commvault, are
trying different things within their software to get this working, but it’s
causing us more problems. I figured I would take a shot and see if
someone, who works with the oVirt software, would have any ideas.
[image: Count On EMC] <http://www.emcins.com/>
*Doug Maxfield *| Senior Operating Systems Analyst
*EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265
Tel: 515.345.4507 | Fax: 866.331.1522
Doug.L.Maxfield(a)EMCIns.com | www.emcins.com
*From:* Lev Veyde <lveyde(a)redhat.com>
*Sent:* Tuesday, February 12, 2019 11:51 AM
*To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com>
*Cc:* users <users(a)ovirt.org>
*Subject:* Re: [ovirt-users] Creating a static route
Hi Doug,
This is indeed quite weird...
It looks like the OS for some reason disregards the static route that you
have added.
BTW, have you verified that it's indeed was added by running "ip route"
following the "ip route add ..." command ?
Maybe somebody from the network team has an idea of what may be the cause
of this issue...
Thanks in advance,
On Tue, Feb 12, 2019 at 7:36 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com>
wrote:
Lev,
I’m showing you the same outputs (ip a, ip route, traceroute, ip route
add, and traceroute) from another server in this group that doesn’t use the
ovirtmgmt for it’s default interface.
[root@paputopcomm04 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eno3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen
1000
link/ether 90:1b:0e:db:bc:c0 brd ff:ff:ff:ff:ff:ff
inet 172.21.5.34/16 brd 172.21.255.255 scope global eno3
valid_lft forever preferred_lft forever
inet6 fe80::921b:eff:fedb:bcc0/64 scope link
valid_lft forever preferred_lft forever
3: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen
1000
link/ether 90:1b:0e:e8:da:03 brd ff:ff:ff:ff:ff:ff
inet 172.26.5.34/16 brd 172.26.255.255 scope global eno1
valid_lft forever preferred_lft forever
inet6 fe80::921b:eff:fee8:da03/64 scope link
valid_lft forever preferred_lft forever
4: eno2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN
qlen 1000
link/ether 90:1b:0e:e8:da:04 brd ff:ff:ff:ff:ff:ff
5: eno4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen
1000
link/ether 90:1b:0e:db:bc:c1 brd ff:ff:ff:ff:ff:ff
inet 172.17.53.18/16 brd 172.17.255.255 scope global eno4
valid_lft forever preferred_lft forever
inet6 fe80::921b:eff:fedb:bcc1/64 scope link
valid_lft forever preferred_lft forever
[root@paputopcomm04 ~]#
[root@paputopcomm04 ~]#
[root@paputopcomm04 ~]# ip route
default via 172.21.0.250 dev eno3
169.254.0.0/16 dev eno3 scope link metric 1002
169.254.0.0/16 dev eno4 scope link metric 1005
172.17.0.0/16 dev eno4 proto kernel scope link src 172.17.53.18
172.21.0.0/16 dev eno3 proto kernel scope link src 172.21.5.34
172.26.0.0/16 dev eno1 proto kernel scope link src 172.26.5.34
[root@paputopcomm04 ~]#
[root@paputopcomm04 ~]#
[root@paputopcomm04 ~]# traceroute 172.22.20.31
traceroute to 172.22.20.31 (172.22.20.31), 30 hops max, 60 byte packets
1 ames-acc1-agg-1.emcins.com (172.21.0.246) 1.081 ms 1.816 ms 1.832 ms
2 192.168.200.30 (192.168.200.30) 0.639 ms 192.168.200.14
(192.168.200.14) 1.063 ms 1.577 ms
3 192.168.200.101 (192.168.200.101) 3.110 ms ames-sw-wanrtr.emcins.com
(192.168.200.97) 3.191 ms 3.277 ms
4 192.168.100.26 (192.168.100.26) 4.146 ms 4.273 ms 4.394 ms
5 192.168.100.98 (192.168.100.98) 1.893 ms 2.364 ms 2.397 ms
6 192.168.100.50 (192.168.100.50) 5.707 ms 192.168.100.33
(192.168.100.33) 5.134 ms 192.168.100.50 (192.168.100.50) 4.105 ms
7 pdputopcomm01.emcins.com (172.22.20.31) 1.359 ms 1.374 ms 1.351 ms
[root@paputopcomm04 ~]#
[root@paputopcomm04 ~]#
[root@paputopcomm04 ~]#
[root@paputopcomm04 ~]#
[root@paputopcomm04 ~]# ip route add 172.22.20.31 via 172.21.12.61
[root@paputopcomm04 ~]#
[root@paputopcomm04 ~]#
[root@paputopcomm04 ~]#
[root@paputopcomm04 ~]# traceroute 172.22.20.31
traceroute to 172.22.20.31 (172.22.20.31), 30 hops max, 60 byte packets
1 CenteraAmesAN1.emcins.com (172.21.12.61) 6.184 ms 6.475 ms 6.686 ms
2 192.168.90.9 (192.168.90.9) 1.770 ms 1.979 ms 2.189 ms
3 pdputopcomm01.emcins.com (172.22.20.31) 1.405 ms * 1.354 ms
[image: Count On EMC] <http://www.emcins.com/>
*Doug Maxfield *| Senior Operating Systems Analyst
*EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265
Tel: 515.345.4507 | Fax: 866.331.1522
Doug.L.Maxfield(a)EMCIns.com | www.emcins.com
*From:* Lev Veyde <lveyde(a)redhat.com>
*Sent:* Tuesday, February 12, 2019 11:07 AM
*To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com>
*Cc:* users <users(a)ovirt.org>
*Subject:* Re: [ovirt-users] Creating a static route
Hi Doug,
In most cases it should not be required, especially as my guess (again it
would be easier if you could post the output of the "ip a" and "ip
route")
is that the eno1 is part of the ovirtmgmt bridge.
What is the output of the "traceroute 172.22.20.31" that you get on the
host after you have added the static route?
Thanks in advance,
On Tue, Feb 12, 2019 at 6:58 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com>
wrote:
Lev,
One other question, since there are multiple enabled interfaces (ovirtmgmt
and eno1), do I need to specify an interface for the route add.
[image: Count On EMC] <http://www.emcins.com/>
*Doug Maxfield *| Senior Operating Systems Analyst
*EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265
Tel: 515.345.4507 | Fax: 866.331.1522
Doug.L.Maxfield(a)EMCIns.com | www.emcins.com
*From:* Lev Veyde <lveyde(a)redhat.com>
*Sent:* Tuesday, February 12, 2019 10:50 AM
*To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com>
*Cc:* users <users(a)ovirt.org>
*Subject:* Re: [ovirt-users] Creating a static route
Hi Doug,
What do you mean by "static route is refused"?
What is the error message(s) you see?
Can you please try to add the route with the following command:
ip route add 172.22.20.31 via 172.21.12.61
If that doesn't work, then please provide more details, i.e. what is the
exact error message(s) you see, the version of your OS and oVirt, output of
"ip a" and "ip route" on your host(s), so that it will be easier to
help
you.
Thanks in advance,
On Tue, Feb 12, 2019 at 6:43 PM Doug Maxfield <Doug.L.Maxfield(a)emcins.com>
wrote:
Lev,
Thanks for your response.
If I attempt to manually add the route using route add:
route add -net 172.22.20.31 netmask 255.255.255.255 gw 172.21.12.61 dev
ovirtmgmt
This static route is refused and all traffic is routed over the default
gateway.
But if I use a server that doesn’t use the ovirtmgmt interface and set the
same static route, the required data is routed correctly over that static
route.
[image: Count On EMC] <http://www.emcins.com/>
*Doug Maxfield *| Senior Operating Systems Analyst
*EMC Insurance Companies *717 Mulberry St | Des Moines, IA 50265
Tel: 515.345.4507 | Fax: 866.331.1522
Doug.L.Maxfield(a)EMCIns.com | www.emcins.com
*From:* Lev Veyde <lveyde(a)redhat.com>
*Sent:* Tuesday, February 12, 2019 10:34 AM
*To:* Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com>
*Cc:* users <users(a)ovirt.org>
*Subject:* Re: [ovirt-users] Creating a static route
Hi Doug,
What is the exact problem you are having while attempting to add a static
route on the hosts?
Thanks in advance,
On Tue, Feb 12, 2019 at 5:23 PM <doug.l.maxfield(a)emcins.com> wrote:
Good Morning,
New to oVirt. We are using this with a backup solution from Commvault.
The issue that we are having is that we need to setup a static route for
specific data between 2 remote sites. The ovirtmgmt is configured with the
correct IP and gateway for the server. We need to route data over a
different gateway so that we don't "max out" the default network
connection
between the 2 sites. Example below
Ovirtmgmt IP - 172.21.5.31
Gateway IP - 172.21.0.250
We need any traffic with a destination of 172.22.20.31(Remote site) to
route over this gateway, 172.21.12.61
There are multiple servers in this configuration. Servers that are not
using the ovirtmgmt interface for their default, we are able to route the
data. The only problem is with attempting to setup a different static
route on the ovirtmgmt interfaces.
Thanks in advance for any help!!!
Doug
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/WGXSLHAP3X5...
--
*Lev Veyde*
Software Engineer, RHCE | RHCVA | MCITP
Red Hat Israel
<https://www.redhat.com>
lev(a)redhat.com | lveyde(a)redhat.com
<https://red.ht/sig>
*TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted>
NOTICE: This message (including any attachments) is intended for a
specific individual and may contain information that is either confidential
or legally protected. If you believe that it has been sent to you in
error, please reply to the sender that you have received the message in
error, then delete it. If you are not the intended recipient, you are
hereby notified that any retention, dissemination, distribution, or copying
of this communication is strictly prohibited. Thank you. EMC071856
--
*Lev Veyde*
Software Engineer, RHCE | RHCVA | MCITP
Red Hat Israel
<https://www.redhat.com>
lev(a)redhat.com | lveyde(a)redhat.com
<https://red.ht/sig>
*TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted>
--
*Lev Veyde*
Software Engineer, RHCE | RHCVA | MCITP
Red Hat Israel
<https://www.redhat.com>
lev(a)redhat.com | lveyde(a)redhat.com
<https://red.ht/sig>
*TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted>
--
*Lev Veyde*
Software Engineer, RHCE | RHCVA | MCITP
Red Hat Israel
<https://www.redhat.com>
lev(a)redhat.com | lveyde(a)redhat.com
<https://red.ht/sig>
*TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted>
--
*Lev Veyde*
Software Engineer, RHCE | RHCVA | MCITP
Red Hat Israel
<https://www.redhat.com>
lev(a)redhat.com | lveyde(a)redhat.com
<https://red.ht/sig>
*TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted>
--
*Lev Veyde*
Software Engineer, RHCE | RHCVA | MCITP
Red Hat Israel
<https://www.redhat.com>
lev(a)redhat.com | lveyde(a)redhat.com
<https://red.ht/sig>
*TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted>
--
*Lev Veyde*
Software Engineer, RHCE | RHCVA | MCITP
Red Hat Israel
<https://www.redhat.com>
lev(a)redhat.com | lveyde(a)redhat.com
<https://red.ht/sig>
*TRIED. TESTED. TRUSTED.* <https://redhat.com/trusted>
--
Lev Veyde
Software Engineer, RHCE | RHCVA | MCITP
Red Hat Israel
<https://www.redhat.com>
lev(a)redhat.com | lveyde(a)redhat.com
<https://red.ht/sig>
TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>