12:05 a.m.
Thank you so much Victor !
Anyone, any ideea how could I disable video compression for spice console
on particular vms ?
I am trying to implement an "almost" full desktop experience with an oVirt
based vdi environment.
And besides the Windows10 spice issues ( which are the main cause of this
thread ), it seems that Windows 7 is affected too by the multimedia playing
perspective. Which makes a total blocker on project implementation....
Any suggestions/ similar experiences ?
Thank you very much and have a nice day !
Leo
On Mon, Feb 11, 2019, 12:01 Victor Toso <victortoso(a)redhat.com wrote:
Hi,
On Mon, Feb 11, 2019 at 11:50:49AM +0200, Leo David wrote:
> Hi,
> "This enable host-side streaming, are you sure you want it?"
> Not sure yet, but i would at least disable compression, video
> playing seems to be pretty poor, and crackling ( youtube, etc )
For playing video use-cases (youtube) it might be okay but not
for playing games as it has some hard coded delay in the
streaming code path.
The streaming is mjpeg so you don't save much bandwidth either.
> "AFAIK, if virsh edit exits without issue, you need to shutdown
> the vm and then start it again"
> I did that, and when the vm comes back on, my changes are not there
> anymore ....
Might be something specific to ovirt, not sure :(
I hope someone else can help you.
> On Mon, Feb 11, 2019 at 10:45 AM Victor Toso <victortoso(a)redhat.com>
wrote:
>
> > Hi,
> >
> > On Sun, Feb 10, 2019 at 02:08:48PM +0200, Leo David wrote:
> > > Hi,
> > >
> > > I am trying to disable video compression as per this thread:
> > > https://lists.ovirt.org/pipermail/users/2017-January/078753.html
> > >
> > > The thing is that I just can't figure out where to place the
following:
> > >
> > > <graphics type='spice' autoport='yes'>
> > > <listen type='address'/>
> > > <image compression='off'/>
> > > <streaming mode='filter'/>
> >
> > This enable host-side streaming, are you sure you want it?
> >
> > > </graphics>
> > >
> > > If I attempt to edit vm properties by using virsh and add these
> > > custom settings, the configuration file gets overwritten once
> > > the vm reboots.
> >
> > AFAIK, if virsh edit exits without issue, you need to shutdown
> > the vm and then start it again. Reboot is not enough.
> >
> > > Any suggestions?
> > >
> > > Thank you,
> > >
> > > Leo
> > >
> > >
> > >
> > >
> > > On Wed, Feb 6, 2019 at 7:17 PM Leo David <leoalex(a)gmail.com> wrote:
> > >
> > > > Hello everyone,
> > > > Any chance that this issue to be already fixed in the new 4.3
version ?
> > > > Thank you !
> > > >
> > > > On Tue, Jan 8, 2019, 12:25 Victor Toso <victortoso(a)redhat.com
wrote:
> > > >
> > > >> Hi,
> > > >>
> > > >> On Tue, Jan 08, 2019 at 12:08:31PM +0200, Leo David wrote:
> > > >> > Thank you very mucjh, and sorry for being so lazy to
search
> > > >> > for that rpm by myself. Somehow, fedora rpms missed from my
> > > >> > mind. Oh boy, it requires a lot of packages. Do you think
> > > >> > would it be a good idea to temporarily install fedora repos,
do
> > > >> > the yum installation to get the dependencoes too and then
> > > >> > disable the repo ? I am thinking to not break the ovirt
node
> > > >> > installation.
> > > >>
> > > >> The easiest path is to get the source from your current rpm,
> > > >> apply the patch mentioned in previous email, build, install,
> > > >> test.
> > > >>
> > > >> If that does not work you can rollback. If works, you can
rethink
> > > >> what is best.
> > > >>
> > > >> Cheers,
> > > >>
> > > >> > yum localinstall spice-server-0.14.1-1.fc30.x86_64.rpm
> > > >> > Loaded plugins: enabled_repos_upload, fastestmirror,
> > imgbased-persist,
> > > >> > package_upload, product-id, search-disabled-repos,
> > subscription-manager,
> > > >> > vdsmupgrade
> > > >> > This system is not registered with an entitlement server.
You
can
> > use
> > > >> > subscription-manager to register.
> > > >> > Examining spice-server-0.14.1-1.fc30.x86_64.rpm:
> > > >> > spice-server-0.14.1-1.fc30.x86_64
> > > >> > Marking spice-server-0.14.1-1.fc30.x86_64.rpm as an update
to
> > > >> > spice-server-0.14.0-2.el7_5.3.x86_64
> > > >> > Resolving Dependencies
> > > >> > --> Running transaction check
> > > >> > ---> Package spice-server.x86_64 0:0.14.0-2.el7_5.3 will
be
updated
> > > >> > ---> Package spice-server.x86_64 0:0.14.1-1.fc30 will be
an
update
> > > >> > --> Processing Dependency:
libcrypto.so.1.1(OPENSSL_1_1_0)(64bit)
> > for
> > > >> > package: spice-server-0.14.1-1.fc30.x86_64
> > > >> > Loading mirror speeds from cached hostfile
> > > >> > * epel: ftp.nluug.nl
> > > >> > * ovirt-4.2-epel: ftp.nluug.nl
> > > >> > --> Processing Dependency:
libssl.so.1.1(OPENSSL_1_1_0)(64bit)
for
> > > >> package:
> > > >> > spice-server-0.14.1-1.fc30.x86_64
> > > >> > --> Processing Dependency: libcrypto.so.1.1()(64bit) for
package:
> > > >> > spice-server-0.14.1-1.fc30.x86_64
> > > >> > --> Processing Dependency: libgstapp-1.0.so.0()(64bit)
for
package:
> > > >> > spice-server-0.14.1-1.fc30.x86_64
> > > >> > --> Processing Dependency: libgstbase-1.0.so.0()(64bit)
for
package:
> > > >> > spice-server-0.14.1-1.fc30.x86_64
> > > >> > --> Processing Dependency: libgstreamer-1.0.so.0()(64bit)
for
> > package:
> > > >> > spice-server-0.14.1-1.fc30.x86_64
> > > >> > --> Processing Dependency: libgstvideo-1.0.so.0()(64bit)
for
> > package:
> > > >> > spice-server-0.14.1-1.fc30.x86_64
> > > >> > --> Processing Dependency: liborc-0.4.so.0()(64bit) for
package:
> > > >> > spice-server-0.14.1-1.fc30.x86_64
> > > >> > --> Processing Dependency: libssl.so.1.1()(64bit) for
package:
> > > >> > spice-server-0.14.1-1.fc30.x86_64
> > > >> > --> Finished Dependency Resolution
> > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64
> > > >> > (/spice-server-0.14.1-1.fc30.x86_64)
> > > >> > Requires: libgstvideo-1.0.so.0()(64bit)
> > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64
> > > >> > (/spice-server-0.14.1-1.fc30.x86_64)
> > > >> > Requires: libgstbase-1.0.so.0()(64bit)
> > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64
> > > >> > (/spice-server-0.14.1-1.fc30.x86_64)
> > > >> > Requires: libgstreamer-1.0.so.0()(64bit)
> > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64
> > > >> > (/spice-server-0.14.1-1.fc30.x86_64)
> > > >> > Requires: libcrypto.so.1.1(OPENSSL_1_1_0)(64bit)
> > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64
> > > >> > (/spice-server-0.14.1-1.fc30.x86_64)
> > > >> > Requires: liborc-0.4.so.0()(64bit)
> > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64
> > > >> > (/spice-server-0.14.1-1.fc30.x86_64)
> > > >> > Requires: libcrypto.so.1.1()(64bit)
> > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64
> > > >> > (/spice-server-0.14.1-1.fc30.x86_64)
> > > >> > Requires: libssl.so.1.1(OPENSSL_1_1_0)(64bit)
> > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64
> > > >> > (/spice-server-0.14.1-1.fc30.x86_64)
> > > >> > Requires: libgstapp-1.0.so.0()(64bit)
> > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64
> > > >> > (/spice-server-0.14.1-1.fc30.x86_64)
> > > >> > Requires: libssl.so.1.1()(64bit)
> > > >> > You could try using --skip-broken to work around the
problem
> > > >> > You could try running: rpm -Va --nofiles --nodigest
> > > >> > Uploading Enabled Repositories Report
> > > >> > Loaded plugins: fastestmirror, product-id,
subscription-manager
> > > >> > This system is not registered with an entitlement server.
You
can
> > use
> > > >> > subscription-manager to register.
> > > >> > Cannot upload enabled repos report, is this client
registered?
> > > >> >
> > > >> > Thank you !
> > > >> >
> > > >> > Leo
> > > >> >
> > > >> > On Tue, Jan 8, 2019 at 10:19 AM Victor Toso <
victortoso(a)redhat.com>
> > > >> wrote:
> > > >> >
> > > >> > > Hi,
> > > >> > >
> > > >> > > On Mon, Jan 07, 2019 at 07:29:13PM +0200, Leo David
wrote:
> > > >> > > > Thank you very much Victor,
> > > >> > > > Is there a rpm that I can easily install on all
the nodes,
or
> > will
> > > >> I need
> > > >> > > > to build that version from sources ?
> > > >> > >
> > > >> > > You can fetch the release of 0.14.1 version at
> > > >> > > https://gitlab.freedesktop.org/spice/spice/tags
> > > >> > >
> > > >> > > You can fetch an rpm from Fedora here
> > > >> > >
https://koji.fedoraproject.org/koji/buildinfo?buildID=1138474
> > > >> > >
> > > >> > > Cheers,
> > > >> > >
> > > >> > > > On Mon, Jan 7, 2019, 19:14 Victor Toso <
victortoso(a)redhat.com
> > > >> wrote:
> > > >> > > >
> > > >> > > > > Hi,
> > > >> > > > >
> > > >> > > > > On Mon, Jan 07, 2019 at 07:00:04PM +0200, Leo
David wrote:
> > > >> > > > > > Thank you very much !
> > > >> > > > > >
> > > >> > > > > > I have modified
> > > >> > > /etc/ovirt-engine/osinfo.conf.d/00-defaults.properties
> > > >> > > > > file
> > > >> > > > > > and added the last line
> > > >> > > > > >
> > > >> > > > > > # Windows10x64
> > > >> > > > > > os.windows_10x64.id.value = 27
> > > >> > > > > > os.windows_10x64.name.value = Windows 10
x64
> > > >> > > > > > os.windows_10x64.derivedFrom.value =
windows_8x64
> > > >> > > > > > os.windows_10x64.productKey.value =
> > > >> > > > > >
os.windows_10x64.resources.maximum.ram.value = 2097152
> > > >> > > > > > os.windows_10x64.cpu.unsupported.value =
conroe,
opteron_g1
> > > >> > > > > > os.windows_10x64.sysprepPath.value =
> > > >> > > > > >
${ENGINE_USR}/conf/sysprep/sysprep.w10x64
> > > >> > > > > >
*os.windows_10x64.devices.display.vramMultiplier.value
= 2*
> > > >> > > > > >
> > > >> > > > > > The vm has the "Windows10x64"
profile configured
> > > >> > > > > >
> > > >> > > > > > Restarted the ovirt-engine vm, powered
on the Windows
10 vm.
> > > >> Not any
> > > >> > > > > > difference...The console is very slow,
almost unusable.
> > > >> > > > > >
> > > >> > > > > > Also, tried to upgrade spice-server on
the node, but it
> > seems
> > > >> that
> > > >> > > there
> > > >> > > > > > aeno updates available. At the moment,
it is installed:
> > > >> > > > > > spice-server.x86_64
> > 0.14.0-2.el7_5.3
> > > >> > > > >
> > > >> > > > > Just for reference, the patch in spice-server
that should
> > help is
> > > >> > > > > from the mail thread
> > > >> > > > >
> > > >> > > > >
> > > >> > > > >
> > > >> > >
> > > >>
> >
https://lists.freedesktop.org/archives/spice-devel/2018-June/044237.html
> > > >> > > > >
> > > >> > > > > Merged as
> > > >> > > > >
> > > >> > > > >
> > > >> > > > >
> > > >> > >
> > > >>
> >
https://gitlab.freedesktop.org/spice/spice/commit/ca4984570f425e87e92abe5...
> > > >> > > > >
> > > >> > > > > Looking at the repo with git tag --contains
> > ca4984570f425e87e92
> > > >> > > > > it shows v0.14.1.
> > > >> > > > >
> > > >> > > > > 0.14.0-2 probably does not contain that.
Either update to
> > 0.14.1
> > > >> > > > > or backport the patch. It does need to
shutdown and start
the
> > VM
> > > >> > > > > again.
> > > >> > > > >
> > > >> > > > > > Any thoughts ?
> > > >> > > > > >
> > > >> > > > > > Thank you !
> > > >> > > > >
> > > >> > > > > I hope it helps ;)
> > > >> > > > >
> > > >> > > > > Cheers,
> > > >> > > > >
> > > >> > >
> > > >> >
> > > >> >
> > > >> > --
> > > >> > Best regards, Leo David
> > > >>
> > > >
> > >
> > > --
> > > Best regards, Leo David
> >
>
>
> --
> Best regards, Leo David