Hello, I can't remember if I already asked that here, but my researches returned nothing obvious. It is frequent in our setup to boot a VM setup with two NICS : - one in a network with a DHCP server, leading to a PXE/tftp/kickstart setup - a second one with a network with no DHCP, nor routed. We use this network in some cases to access iSCSI data. When PXE booting such a VM, I realized that in gPXE, the NICs are order according to their MAC address (net0, net1...) I found no mean to explicitly tell gPXE to use a specific interface, and it is a pain, because my setup workflow implies I could choose the correct interface. In the oVirt web GUI, I found nothing about that. In the ovirt-shell, I had no better luck. In the gPXE wiki, I found nothing more that what's above. This is not a big issue, but was worth asking. -- Nicolas Ecarnot