Re: [ovirt-users] Best practices for LACP bonds on oVirt

Adding another question to what Matthias has said. I also noted that oVirt (and RHV) documentation does not mention the supported block size on iSCSI domains. RHV: https://access.redhat.com/documentation/en-us/red_ hat_virtualization/4.0/html/administration_guide/chap-storage oVirt: http://www.ovirt.org/documentation/admin-guide/chap-Storage/ I’m interested on 4K blocks over iSCSI, but this isn’t really widely supported. The question is: oVirt supports this? Or should we stay with the default 512 bytes of block size?

Thanks, V. On 4 Jul 2017, at 09:10, Matthias Leopold <matthias.leopold@meduniwien. ac.at> wrote: Am 2017-07-04 um 10:01 schrieb Simone Tiraboschi: On Tue, Jul 4, 2017 at 5:50 AM, Vinícius Ferrão <ferrao(a)if.ufrj.br < mailto:ferrao@if.ufrj.br <ferrao(a)if.ufrj.br&gt;&gt;&gt; wrote: Thanks, Konstantin. Just to be clear enough: the first deployment would be made on classic eth interfaces and later after the deployment of Hosted Engine I can convert the "ovirtmgmt" network to a LACP Bond, right? Another question: what about iSCSI Multipath on Self Hosted Engine? I've looked through the net and only found this issue: https://bugzilla.redhat.com/show_bug.cgi?id=1193961 <https://bugzilla.redhat.com/show_bug.cgi?id=1193961> Appears to be unsupported as today, but there's an workaround on the comments. It's safe to deploy this way? Should I use NFS instead? It's probably not the most tested path but once you have an engine you should be able to create an iSCSI bond on your hosts from the engine. Network configuration is persisted across host reboots and so the iSCSI bond configuration. A different story is instead having ovirt-ha-agent connecting multiple IQNs or multiple targets over your SAN. This is currently not supported for the hosted-engine storage domain. See: https://bugzilla.redhat.com/show_bug.cgi?id=1149579 Hi Simone, i think my post to this list titled "iSCSI multipathing setup troubles" just recently is about the exact same problem, except i'm not talking about the hosted-engine storage domain. i would like to configure _any_ iSCSI storage domain the way you describe it in https://bugzilla.redhat.com/ show_bug.cgi?id=1149579#c1. i would like to do so using the oVirt "iSCSI Multipathing" GUI after everything else is setup. i can't find a way to do this. is this now possible? i think the iSCSI Multipathing documentation could be improved by describing an example IP setup for this. thanks a lot matthias _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users