Hi Maor
Sorry for the late answer, I was out of office for a couple of days.
You were right, it was an engine issue. Never happened before, after attaching and
detaching more than one time the export domain.
A restart solved the issue, the export domain that before the reboot was shown in
"preparing for maintenance" , after reboot was shown in the correct state, so
detach, reattach to another DC was tried successfully, at least three times, with export /
import activity also.
Thank you so much !.
Best regards,
Roberto
-----Messaggio originale-----
Da: Maor Lipchuk [mailto:mlipchuk@redhat.com]
Inviato: domenica 17 maggio 2015 12:00
A: NUNIN Roberto
Cc: users(a)ovirt.org
Oggetto: Re: R: [ovirt-users] NFS export domain still remain in "Preparing for
maintenance"
Hi NUNIN,
Usually when an NFS Storage Domain is in "preparing for maintenance"
status, it is because one of the Hosts encounter a problem while un mounting
the storage domain.
Can you please add the engine logs and also the VDSM logs of the hosts you
are using in the Data Center.
while gathering all the logs you could try also the following actions:
1. Since you wrote that you do see an audit log indicating the operation
succeed, maybe it could also be a refresh problem in the GUI.
Could you try to switch tabs in the GUI (For example to peak the "Virtual
Machine" main tab and switch back to the Storage Domain tab)
If that is not helping, try for restart your engine service (guessing it also could
be an issue of the monitor Storage Domains)
Please let me know if there is any difference
Regards,
Maor
----- Original Message -----
> From: "NUNIN Roberto" <Roberto.Nunin(a)comifar.it>
> To: "Maor Lipchuk" <mlipchuk(a)redhat.com>
> Cc: users(a)ovirt.org
> Sent: Friday, May 15, 2015 10:28:36 AM
> Subject: R: [ovirt-users] NFS export domain still remain in "Preparing for
maintenance"
>
> Apologize for spamming: when I try to put the NFS_Export in maintenance
mode,
> in the engine GUI, messages area, I can see:
>
>
> 2015-May-15, 09:22
>
> Storage Domain NFS_Export (Data Center xxxxx) was deactivated.
>
>
>
>
>
>
> but the status of the NFS_Export still remain “Preparing For Maintenance”
> and the Deattach function is disabled.
>
> BR
>
>
>
>
>
> RN
>
>
>
>
>
> > -----Messaggio originale-----
>
> > Da: NUNIN Roberto
>
> > Inviato: venerdì 15 maggio 2015 09:22
>
> > A: 'Maor Lipchuk'
>
> > Cc: users(a)ovirt.org
>
> > Oggetto: R: [ovirt-users] NFS export domain still remain in "Preparing
for
>
> > maintenance"
>
> >
>
> > Hi Maor
>
> >
>
> > Thanks for answering.
>
> >
>
> > Probably my description wasn't so clear, try to explain better.
>
> >
>
> > We have configured one storage as NFS export (exported from a server
that
>
> > isn't part of the oVirt installation), to be used to move exported VM
> > between
>
> > one DC and another.
>
> >
>
> > The process to export VM's ends correctly but, when we try to put the
NFS
>
> > export storage in maintenance mode (not the hosts) before to deattach it
>
> > from the current DC and, subsequently, attach to the DC where I want to
>
> > import VM, the process remain hung indefinitely in “Preparing for
>
> > maintenance phase".
>
> >
>
> > I'm sure that the VM export process is ended correctly, looking at the
logs
> > in
>
> > the engine GUI and also to data into the NFS export.
>
> >
>
> > Because of only one export storage is allowed per DC, I'm not able to
move
>
> > VM between DC's.
>
> >
>
> > This is the behavior.
>
> >
>
> > Best regards
>
> >
>
> >
>
> > Roberto
>
> >
>
> > > -----Messaggio originale-----
>
> > > Da: Maor Lipchuk [mailto:mlipchuk@redhat.com]
>
> > > Inviato: mercoledì 13 maggio 2015 23:18
>
> > > A: NUNIN Roberto
>
> > > Cc: users@ovirt.org<mailto:users@ovirt.org>
>
> > > Oggetto: Re: [ovirt-users] NFS export domain still remain in
"Preparing
> > > for
>
> > > maintenance"
>
> > >
>
> > > Hi NUNIN,
>
> > >
>
> > > I'm not sure that I clearly understood the problem.
>
> > > You wrote that your NFS export is attached to a 6.6 cluster, though a
>
> > cluster
>
> > > is mainly an entity which contains Hosts.
>
> > >
>
> > > If it is the Host that was preparing for maintenance then it could be
> > > that
>
> > > there are VMs which are running on that Host which are currently
during
>
> > live
>
> > > migration.
>
> > > In that case you could either manually migrate those VMs, shut them
>
> > down,
>
> > > or simply move the Host back to active.
>
> > > Is that indeed the issue? if not ,can you elaborate a but more please
>
> > >
>
> > >
>
> > > Thanks,
>
> > > Maor
>
> > >
>
> > >
>
> > >
>
> > > ----- Original Message -----
>
> > > > From: "NUNIN Roberto"
> > > >
<Roberto.Nunin@comifar.it<mailto:Roberto.Nunin@comifar.it>>
>
> > > > To: users@ovirt.org<mailto:users@ovirt.org>
>
> > > > Sent: Tuesday, May 12, 2015 5:17:39 PM
>
> > > > Subject: [ovirt-users] NFS export domain still remain in
"Preparing for
>
> > > maintenance"
>
> > > >
>
> > > >
>
> > > >
>
> > > > Hi all
>
> > > >
>
> > > >
>
> > > >
>
> > > > We are using oVirt engine 3.5.1-0.0 on Centos 6.6
>
> > > >
>
> > > > We have two DC. One with hosts using vdsm-4.16.10-
>
> > > 8.gitc937927.el7.x86_64,
>
> > > > the other vdsm-4.16.12-7.gita30da75.el6.x86_64 on Centos6.6
>
> > > >
>
> > > > No hosted-engine, it run on a dedicates VM, outside oVirt.
>
> > > >
>
> > > >
>
> > > >
>
> > > > Behavior: When try to put the NFS export currently active and
attached
>
> > to
>
> > > the
>
> > > > 6.6 cluster, used to move VM from one DC to the other, this remain
>
> > > > indefinitely in “Preparing for maintenance phase”.
>
> > > >
>
> > > >
>
> > > >
>
> > > > No DNS resolution issue in place. All parties involved are solved
> > > > directly
>
> > > > and via reverse resolution.
>
> > > >
>
> > > > I’ve read about the issue on el7 and IPv6 bug, but here we have the
>
> > > problem
>
> > > > on Centos 6.6 hosts.
>
> > > >
>
> > > >
>
> > > >
>
> > > > Any idea/suggestion/further investigation ?
>
> > > >
>
> > > >
>
> > > >
>
> > > > Can we reinitialize the NFS export in some way ? Only erasing
content
?
>
> > > >
>
> > > > Thanks in advance for any suggestion.
>
> > > >
>
> > > >
>
> > > >
>
> > > >
>
> > > >
>
> > > > Roberto Nunin
>
> > > >
>
> > > > Italy
>
> > > >
>
> > > >
>
> > > >
>
> > > >
>
> > > > Questo messaggio e' indirizzato esclusivamente al destinatario
indicato
> > > > e
>
> > > > potrebbe contenere informazioni confidenziali, riservate o
> > > > proprietarie.
>
> > > > Qualora la presente venisse ricevuta per errore, si prega di
segnalarlo
>
> > > > immediatamente al mittente, cancellando l'originale e ogni sua
copia
e
>
> > > > distruggendo eventuali copie cartacee. Ogni altro uso e'
strettamente
>
> > > > proibito e potrebbe essere fonte di violazione di legge.
>
> > > >
>
> > > > This message is for the designated recipient only and may contain
>
> > > privileged,
>
> > > > proprietary, or otherwise private information. If you have received
it
> > > > in
>
> > > > error, please notify the sender immediately, deleting the original
and
> > > > all
>
> > > > copies and destroying any hard copies. Any other use is strictly
> > > > prohibited
>
> > > > and may be unlawful.
>
> > > >
>
> > > > _______________________________________________
>
> > > > Users mailing list
>
> > > > Users@ovirt.org<mailto:Users@ovirt.org>
>
> > > >
http://lists.ovirt.org/mailman/listinfo/users
>
> > > >
>
> ________________________________
> Questo messaggio e' indirizzato esclusivamente al destinatario indicato e
> potrebbe contenere informazioni confidenziali, riservate o proprietarie.
> Qualora la presente venisse ricevuta per errore, si prega di segnalarlo
> immediatamente al mittente, cancellando l'originale e ogni sua copia e
> distruggendo eventuali copie cartacee. Ogni altro uso e' strettamente
> proibito e potrebbe essere fonte di violazione di legge.
>
> This message is for the designated recipient only and may contain
privileged,
> proprietary, or otherwise private information. If you have received it in
> error, please notify the sender immediately, deleting the original and all
> copies and destroying any hard copies. Any other use is strictly prohibited
> and may be unlawful.
>
Questo messaggio e' indirizzato esclusivamente al destinatario indicato e potrebbe
contenere informazioni confidenziali, riservate o proprietarie. Qualora la presente
venisse ricevuta per errore, si prega di segnalarlo immediatamente al mittente,
cancellando l'originale e ogni sua copia e distruggendo eventuali copie cartacee. Ogni
altro uso e' strettamente proibito e potrebbe essere fonte di violazione di legge.
This message is for the designated recipient only and may contain privileged, proprietary,
or otherwise private information. If you have received it in error, please notify the
sender immediately, deleting the original and all copies and destroying any hard copies.
Any other use is strictly prohibited and may be unlawful.