On 06/10/2012 10:01 AM, Mohsen Saeedi wrote:
It's Intel Xeon CPU 5130.
Itamar, as you said i run that command and i paste the command output below:
[root@kvm01 ~]# vdsClient -s 0 getVdsCaps grep -i flags
sorry, i meant: vdsClient -s 0 getVdsCaps | grep -i flags the pipe would have made this filster only this line:
cpuFlags =
fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,tm2,ssse3,cx16,xtpr,pdcm,dca,lahf_lm,dts,tpr_shadow anyway: 1. it shows no models on this host recognized by libvirt. 2. as a first step, try to reboot your machine, set DX (Disable Execute) flag in bios, to a *cold* boot and check again for vdsClient -s 0 getVdsCaps | grep -i flags which should show some modelXXXX in the list.
HBAInventory = {'iSCSI': [{'InitiatorName': 'iqn.1994-05.com.redhat:9c1d1149e962'}], 'FC': []} ISCSIInitiatorName = iqn.1994-05.com.redhat:9c1d1149e962 bondings = {'bond4': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}, 'bond0': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}, 'bond1': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}, 'bond2': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}, 'bond3': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': [], 'hwaddr': '00:00:00:00:00:00'}} clusterLevels = ['3.0', '3.1'] cpuCores = 4 cpuFlags = fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,tm2,ssse3,cx16,xtpr,pdcm,dca,lahf_lm,dts,tpr_shadow cpuModel = Intel(R) Xeon(R) CPU 5130 @ 2.00GHz cpuSockets = 2 cpuSpeed = 1999.793 emulatedMachines = ['rhel6.2.0', 'pc', 'rhel6.1.0', 'rhel6.0.0', 'rhel5.5.0', 'rhel5.4.4', 'rhel5.4.0'] guestOverhead = 65 hooks = {'before_vm_start': {'50_vhostmd': {'md5': '2aa9ac48ef07de3c94e3428975e9df1a'}, '10_simpleqemu': {'md5': '2c88a35172c02f2125fafe39c1c95fa9'}}, 'after_vm_destroy': {'50_vhostmd': {'md5': '47f8d385859e4c3c96113d8ff446b261'}}, 'before_vm_dehibernate': {'50_vhostmd': {'md5': '2aa9ac48ef07de3c94e3428975e9df1a'}}, 'before_vm_migrate_destination': {'50_vhostmd': {'md5': '2aa9ac48ef07de3c94e3428975e9df1a'}}} kvmEnabled = true lastClient = 217.219.236.9 lastClientIface = ovirtmgmt management_ip = memSize = 7868 networks = {'ovirtmgmt': {'addr': '217.219.236.9', 'cfg': {'DNS2': '4.2.2.1', 'DNS1': '8.8.8.8', 'IPADDR': '217.219.236.9', 'GATEWAY': '217.219.236.20', 'DELAY': '0', 'NM_CONTROLLED': 'no', 'NETMASK': '255.255.255.0', 'BOOTPROTO': 'none', 'DEVICE': 'ovirtmgmt', 'TYPE': 'Bridge', 'ONBOOT': 'yes'}, 'mtu': '1500', 'netmask': '255.255.255.0', 'stp': 'off', 'bridged': True, 'gateway': '217.219.236.20', 'ports': ['eth2']}} nics = {'eth2': {'hwaddr': '00:1b:78:02:5f:a6', 'netmask': '', 'speed': 1000, 'addr': '', 'mtu': '1500'}, 'eth1': {'hwaddr': '00:23:7d:28:db:ba', 'netmask': '', 'speed': 0, 'addr': '', 'mtu': '1500'}, 'eth0': {'hwaddr': '00:23:7d:28:db:b8', 'netmask': '255.255.255.0', 'speed': 1000, 'addr': '192.168.1.241', 'mtu': '1500'}} operatingSystem = {'release': '2.el6.centos.7', 'version': '6', 'name': 'oVirt Node'} packages2 = {'kernel': {'release': '220.17.1.el6.x86_64', 'buildtime': 1337110297.0, 'version': '2.6.32'}, 'spice-server': {'release': '5.el6', 'buildtime': '1323304307', 'version': '0.8.2'}, 'vdsm': {'release': '0.274.git937a4b7.el6', 'buildtime': '1339052732', 'version': '4.9.6'}, 'qemu-kvm': {'release': '2.209.el6_2.5', 'buildtime': '1336984850', 'version': '0.12.1.2'}, 'libvirt': {'release': '23.el6_2.8', 'buildtime': '1334928354', 'version': '0.9.4'}, 'qemu-img': {'release': '2.209.el6_2.5', 'buildtime': '1336984850', 'version': '0.12.1.2'}} reservedMem = 321 software_revision = 0.274 software_version = 4.9 supportedProtocols = ['2.2', '2.3'] supportedRHEVMs = ['3.0', '3.1'] uuid = 34313638-3934-435A-4A37-313230394E30_00:1b:78:02:5f:a6 version_name = Snow Man vlans = {} vmTypes = ['kvm']
Thanks
/*Haim Ateya <hateya@redhat.com>*/ wrote on Sat, 09 Jun 2012 11:36:46 -0400 (EDT):
----- Original Message -----
From: "Itamar Heim"<iheim@redhat.com> To: "Mohsen Saeedi"<mohsen.saeedi@gmail.com> Cc:users@ovirt.org Sent: Saturday, June 9, 2012 5:35:45 PM Subject: Re: [Users] Host CPU type is not compatible with Cluster Properties
Hi
I have problem with cpu type in Ovirt. I have a HP server with Intel(R) Xeon(R) CPU 5130 @ 2.00GHz. when i try to add this host as Ovirt host in default cluster, i get the error message:
Host CPU type is not compatible with Cluster Properties
I know this CPU support VT-x and it's enable in bios. I tested it with KVM and virt-manager and i saw Qemu/KVM when i try to add new virtual machine.
Thanks
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
On 06/09/2012 04:02 PM, Mohsen Saeedi wrote: please send: vdsClient -s 0 getVdsCaps grep -i flags what is the CPU type of the cluster host is attached to (Intel\AMD)?
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users