Re: [ovirt-users] iSCSI Discovery cannot detetect LUN

I did following steps: - delete target on all initiators (ovirt nodes) iscsiadm -m node -T iqn.2017-03.cz.dragon.ovirt.fuvs-sn1:10T -p 10.53.1.201:3260 -u iscsiadm -m node -T iqn.2017-03.cz.dragon.ovirt.fuvs-sn1:10T -p 10.53.1.201:3260 -o delete - stop tgtd on target - fill storage by zeroes (dd if=/dev/zero of=/dev/md125 bs=4096 status=progress) - start tgtd - tried to connect to ovirt (Discovery=ok, Login=ok, but can not see any LUN). === After that I ran this commands on one node: === [root@fudi-cn1 ~]# iscsiadm -m session -o show tcp: [1] 10.53.0.10:3260,1 iqn.2017-03.cz.dragon.ovirt:ovirtengine (non-flash) tcp: [11] 10.53.0.201:3260,1 iqn.2017-03.cz.dragon.ovirt.fudi-sn1:10T (non-flash) tcp: [12] 10.53.1.201:3260,1 iqn.2017-03.cz.dragon.ovirt.fuvs-sn1:10T (non-flash) [root@fudi-cn1 ~]# iscsiadm -m discoverydb -P1 SENDTARGETS: DiscoveryAddress: 10.53.0.201,3260 Target: iqn.2017-03.cz.dragon.ovirt:ovirtengine Portal: 10.53.0.201:3260,1 Iface Name: default iSNS: No targets found. STATIC: Target: iqn.2017-03.cz.dragon.ovirt.fuvs-sn1:10T Portal: 10.53.1.201:3260,1 Iface Name: default Target: iqn.2017-03.cz.dragon.ovirt:ovirtengine Portal: 10.53.0.10:3260,1 Iface Name: default Target: iqn.2017-03.cz.dragon.ovirt.fudi-sn1:10T Portal: 10.53.0.201:3260,1 Iface Name: default FIRMWARE: No targets found. === On iscsi target: === [root@fuvs-sn1 ~]# cat /proc/mdstat Personalities : [raid1] [raid6] [raid5] [raid4] md125 : active raid6 sdl1[11] sdk1[10] sdj1[9] sdi1[8] sdh1[7] sdg1[6] sdf1[5] sde1[4] sdd1[3] sdc1[2] sdb1[1] sda1[0] 9766302720 blocks super 1.2 level 6, 512k chunk, algorithm 2 [12/12] [UUUUUUUUUUUU] bitmap: 0/8 pages [0KB], 65536KB chunk ...etc... [root@fuvs-sn1 ~]# cat /etc/tgt/targets.conf default-driver iscsi <target iqn.2017-03.cz.dragon.ovirt.fuvs-sn1:10T> # provided devicce as a iSCSI target backing-store /dev/md125 # iSCSI Initiator's IP address you allow to connect #initiator-address 10.53.0.0/23 </target> -- Lukas Kaplan 2017-03-25 12:36 GMT+01:00 Lukas Kaplan <lkaplan(a)dragon.cz&gt;: > Co muze myslet tim mappingem? > > Jinak muzu zkusit ddckem celou storage prepsat nulami. > > co ty na to? > > Odesláno z iPhonu > > Začátek přeposílané zprávy: > > *Od:* Yaniv Kaul <ykaul(a)redhat.com&gt; > *Datum:* 24. března 2017 23:25:21 SEČ > *Komu:* Lukáš Kaplan <lkaplan(a)dragon.cz&gt; > *Kopie:* users <users(a)ovirt.org&gt; > *Předmět:* *Re: [ovirt-users] iSCSI Discovery cannot detetect LUN* > > > > On Fri, Mar 24, 2017 at 1:34 PM, Lukáš Kaplan <lkaplan(a)dragon.cz&gt; wrote: > >> Hello all, >> >> please do you have some experience with troubleshooting adding of iSCSI >> domain to ovirt 4.1.1? >> >> I am chalenging this issue now: >> >> 1) I have successfuly installed oVirt 4.1.1 environment with self-hosted >> engine, 3 nodes and 3 storages (iSCSI Master domain, iSCSI for hosted >> engine and NFS ISO domain). Everything is working now. >> >> 2) But, when I want to add new iSCSI domain, I can discover it, I can >> login, but I cant see any LUN on that storage. (I had same problem in oVirt >> 4.1.0, so I made upgrade to 4.1.1) >> > > Are you sure mappings are correct? > Can you ensure the LUN is empty? > Y. > > >> >> 3) Then I tryed to add this storage to another oVirt environment (oVirt >> 3.6) and there are no problem. I can see LUN on that storage and I can >> connect it to oVirt. >> >> I tryed to examine vdsm.log, but it is very detailed and unredable for >> me :-/ >> >> Thak you in advance, have a nice day, >> -- >> Lukas Kaplan >> >> >> >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> >