I was able to get a successful installation of ovirt-engine on
CentOS
6.2 with the latest git master of ovirt-engine.
But problem is, when i try to add same server as vdsm node(host).
there is still some work needed to allow using same host for both.
please use different hosts for now.
it does a bunch of installation stuff, then it reboots.
After reboot i get a lot of these in /var/log/messages:
Mar 13 11:05:56 virtual init: libvirtd main process ended, respawning
Mar 13 11:05:56 virtual init: libvirtd main process (13353) terminated
with status 1
Mar 13 11:05:56 virtual init: libvirtd main process ended, respawning
Mar 13 11:05:56 virtual init: libvirtd main process (13360) terminated
with status 1
Mar 13 11:05:56 virtual init: libvirtd respawning too fast, stopped
Mar 13 11:05:57 virtual respawn: slave '/usr/share/vdsm/vdsm' died too
quickly, respawning slave
Mar 13 11:05:57 virtual respawn: slave '/usr/share/vdsm/vdsm' died too
quickly, respawning slave
After that ovirt portal doesn't work.
2012/3/12 Randy Evans <randy.evans(a)consumertesting.com
<mailto:randy.evans@consumertesting.com>>
__
Thank you very much!
Randy
------------------------------------------------------------------------
*From:* users-bounces(a)ovirt.org <mailto:users-bounces@ovirt.org>
[mailto:users-bounces@ovirt.org <mailto:users-bounces@ovirt.org>]
*On Behalf Of *Elias Abacioglu
*Sent:* Sunday, March 11, 2012 1:44 PM
*To:* users
*Subject:* [Users] Fwd: Re: installing ovirt engine on CentOS
FYI, there is a repo for CentOS 6.
http://www.dreyou.org/ovirt/
-------- Ursprungligt meddelande --------
Ämne: Re: [Users] installing ovirt engine on CentOS
Datum: Sat, 10 Mar 2012 19:28:46 +0530
Från: kumar shantanu <k.shantanu2006(a)gmail.com>
<mailto:k.shantanu2006@gmail.com>
Till: Elias Abacioglu <elias.rabi(a)gmail.com>
<mailto:elias.rabi@gmail.com>
Just wanted to share this.
All who want ovirt to be install centos6, here is good link,
http://www.dreyou.org/ovirt/
Thank you.
On Sat, Mar 10, 2012 at 6:52 PM, Elias Abacioglu
<elias.rabi(a)gmail.com <mailto:elias.rabi@gmail.com>> wrote:
I was able solve it.
I will share the rpms as soon as i get the installation working.
Den den 9 mars 2012 13:56:48 skrev Elias Abacioglu:
I have gotten to this point during the RPM build process:
[INFO]
------------------------------------------------------------------------
[ERROR] FATAL ERROR
[INFO]
------------------------------------------------------------------------
[INFO] org.apache.maven.shared.io
<
http://org.apache.maven.shared.io>.location.ArtifactLocatorStrategy.&l...
[INFO]
------------------------------------------------------------------------
[INFO] Trace
java.lang.NoSuchMethodError: org.apache.maven.shared.io
<
http://org.apache.maven.shared.io>.location.ArtifactLocatorStrategy.&l...
at org.apache.maven.plugin.assembly.io
<
http://assembly.io>.DefaultAssemblyReader.readAssemblies(DefaultAssemb...
at
org.apache.maven.plugin.assembly.mojos.AbstractAssemblyMojo.execute(AbstractAssemblyMojo.java:296)
at
org.apache.maven.plugin.DefaultPluginManager.executeMojo(DefaultPluginManager.java:490)
at
org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(DefaultLifecycleExecutor.java:694)
at
org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalWithLifecycle(DefaultLifecycleExecutor.java:556)
at
org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoal(DefaultLifecycleExecutor.java:535)
at
org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalAndHandleFailures(DefaultLifecycleExecutor.java:387)
at
org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeTaskSegments(DefaultLifecycleExecutor.java:348)
at
org.apache.maven.lifecycle.DefaultLifecycleExecutor.execute(DefaultLifecycleExecutor.java:180)
at
org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:328)
at
org.apache.maven.DefaultMaven.execute(DefaultMaven.java:138)
at org.apache.maven.cli.MavenCli.main(MavenCli.java:362)
at
org.apache.maven.cli.compat.CompatibleMain.main(CompatibleMain.java:60)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:616)
at
org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315)
at
org.codehaus.classworlds.Launcher.launch(Launcher.java:255)
at
org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430)
at org.codehaus.classworlds.Launcher.main(Launcher.java:375)
[INFO]
------------------------------------------------------------------------
[INFO] Total time: 1 minute 47 seconds
[INFO] Finished at: Fri Mar 09 12:50:16 CET 2012
[INFO] Final Memory: 237M/834M
[INFO]
------------------------------------------------------------------------
make: *** [build_mvn] Error 1
error: Bad exit status from /var/tmp/rpm-tmp.95OcZi (%install)
RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.95OcZi (%install)
Chris Brown had a similar issue.
http://www.mail-archive.com/users@ovirt.org/msg00078.html
His solution was to run maven 2.2. But the problem is that I do.
[elab@virtual SPECS]$ mvn -v
/usr/lib/jvm/java
Apache Maven 2.2.1
(rNON-CANONICAL_2011-10-17_20-32_mockbuild; 2011-10-17
21:32:08+0200)
Java version: 1.6.0_22
Java home: /usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0.x86_64/jre
Default locale: en_US, platform encoding: UTF-8
OS name: "linux" version: "2.6.32-220.7.1.el6.x86_64"
arch:
"amd64" Family: "unix"
Any ideas now?
2012/3/9 Elias Abacioglu <elias.rabi(a)gmail.com
<mailto:elias.rabi@gmail.com> <mailto:elias.rabi@gmail.com
<mailto:elias.rabi@gmail.com>>>
>
> Trey, did you have a Python 2.7 RPM or SRPM for EL6?
Where do you see the Python 2.7 dependency? Running
a rebuild
with no
changes on the latest SPEC gives me this ...
Maybe you are right.. I was just blinded by the fact
that the
ovirt-engine rpms needed 2.7.. So that is probably not
needed
after I have rebuilt ovirt rpms.
# rpmbuild -ba --define 'dist .el6' --define 'rhel
6'
ovirt-engine.spec
<snip>
+ make
PREFIX=/builddir/build/BUILDROOT/ovirt-engine-3.0.0_0001-1.6.el6.x86_64/
install
which: no mvn in
(/usr/local/sbin:/usr/bin:/bin:/usr/sbin:/sbin:/builddir/bin)
export MAVEN_OPTS="-XX:MaxPermSize=512m"
install -P gwt-admin,gwt-user -D skipTests
install: WARNING: ignoring --preserve-context; this
kernel is not
SELinux-enabled
install: cannot stat `gwt-admin,gwt-user': No such
file or
directory
make: *** [build_mvn] Error 1
error: Bad exit status from /var/tmp/rpm-tmp.oHg34r
(%install)
I think it requires maven 2.2. There is a maven 2.2 in
jpackage
6.0. But it got a broken dependency.
I tried compiling with maven 2.0 and that failed.
_______________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
--
Kumar Shantanu
******************************************************************
This email and any files transmitted with it are confidential
and intended solely for the individual or entity to whom they are
addressed. If you have received this email in error destroy it
immediately.
******************************************************************
Consumer Testing Laboratories, Inc., Confidential
******************************************************************
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users