Re: [ovirt-users] Multipath handling in oVirt
Le 01/02/2017 à 15:31, Yura Poltoratskiy a écrit :
Here you are:
iSCSI multipathing
<https://dl.dropboxusercontent.com/u/106774860/iSCSI_multipathing.png>
network setup of a host
<https://dl.dropboxusercontent.com/u/106774860/host_network.png>
01.02.2017 15:31, Nicolas Ecarnot пишет:
> Hello,
>
> Before replying further, may I ask you, Yura, to post a screenshot of
> your iSCSI multipathing setup in the web GUI?
>
> And also the same for the network setup of a host ?
>
> Thank you.
>
Thank you Yura.
To Yaniv and Pavel, yes, this leads to this oVirt feature of iSCSI
multipathing, indeed.
I would be curious to see (on Yura's hosts for instance) the translation
of the oVirt iSCSI multipathing in CLI commands (multipath -ll, iscsiadm
-m session -P3, dmsetup table, ...)
Yura's setup seems to be perfectly fitted to oVirt (2 NICs, 2 VLANs, 2
targets in different VLANs, iSCSI multipathing), but I'm trying to see
how I could make this work with our Equallogic presenting one and only
one virtual ip (thus one target VLAN)...
--
Nicolas ECARNOT
