Re: [Users] iSCSI multipath with EqualLogic SAN

Ive discussed this at length with dell's EQ support team, and on a regular system that's connected in to an equallogic san, all the iscsi ports would be on the same subnet. The kicker is, dell really wants you to use their specialized driver/iscsiinitiator to access (known as their HIT kit...host integration tools), and the HIT kit handles establishing all the multiple sessions into the EQ SAN. Unfortunately, equallogic doesnt support RHEV (and thus ovirt), and ovirt does not seem to execute the commands the HIT driver would want to intitiate multiple connections. Dell says that the use of bonding for iscsi just begs for tcp retransmits. since bonding is the only method of failover I see for now, were using anyway against their recommendations (so far zero retransmits, but were not running our systems hard yet). Cheers, Jonathan -----Original Message----- From: users-bounces(a)ovirt.org [mailto:users-bounces@ovirt.org] On Behalf Of Sven Knohsalla Sent: Thursday, February 21, 2013 8:55 AM To: Baptiste AGASSE Cc: users(a)ovirt.org Subject: Re: [Users] iSCSI multipath with EqualLogic SAN Hi Baptiste, usually a SAN doesn't support bonding (see post of Nicolas) of its interfaces, so you have to use multipathing technology. You have to separate all nics in different subnets so multipath can work. Command multipath -ll with show the connected paths. If you "merge" all paths in one subnet you will have the result/behavior you just posted. So this is less oVirt related, more network specific. We have a running iSCSI config with 4 networks and oVirt runs well. Maybe the following link will help you here: https://access.redhat.com/knowledge/docs/en-US/Red_Hat_Enterprise_Linux/6... Cheers, Sven. -----Ursprüngliche Nachricht----- Von: users-bounces(a)ovirt.org [mailto:users-bounces@ovirt.org] Im Auftrag von Nicolas Ecarnot Gesendet: Donnerstag, 21. Februar 2013 15:48 An: users(a)ovirt.org Betreff: Re: [Users] iSCSI multipath with EqualLogic SAN Le 21/02/2013 11:30, Baptiste AGASSE a écrit : I don't know if this is the best setup, but this is exaclty what I did (iSCSI with an Equllogic SAN) : I bonded 4 interfaces of the iSCSI subnet, and it's working fine so far... -- Nicolas Ecarnot _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users ________________________________ This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind SKOPOS to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose.