Re: [ovirt-users] Engine reports

Ansible playbook finished OK. The next step after weekend. thanks Peter On 06/04/2018 23:34, Rich Megginson wrote: > On 04/06/2018 03:08 PM, Peter Hudec wrote: >> Hi, >> >> https://tools.apps.hudecof.net/paste/view/1d493d52 >> >> The difference is >> - I used latest ansible 2.5 from PIPY source, since the RPM package do >> not fit requirements >> - I used GIT repo for openshift-ansible. >> >> I could start it over with the RPM based openshift-ansible > I recommend that you start over with the RPM based openshift-ansible, > which is what the instructions say, which is what I have tested > > alternately - if you want to go the more experimental route, you could > enable the epel-testing yum repo - ansible-2.5 is in epel-testing which > I've been told by the openshift-ansible guys should work > >>     Peter >> >> On 06/04/2018 20:23, Rich Megginson wrote: >>> I'm assuming you are running on a CentOS7 machine, recently updated to >>> the latest base packages. Please confirm. >>> >>> Please provide the output of the following commands: >>> >>> sudo yum repolist >>> >>> sudo rpm -q ansible >>> >>> sudo yum repoquery -i ansible >>> >>> sudo rpm -q openshift-ansible >>> >>> sudo yum repoquery -i openshift-ansible >>> >>> sudo rpm -q origin >>> >>> sudo yum repoquery -i origin >>> >>> sudo cat >>> /usr/share/ansible/openshift-ansible/roles/lib_utils/callback_plugins/aa_version_requirement.py >>> >>> >>> >>> sudo ls -alrtF /etc/origin/logging >>> >>> Please confirm that you followed the steps listed in the link below, >>> including the use of the ansible inventory, vars.yaml.template, and repo >>> files: >>> https://github.com/richm/Main/blob/7e663351dc371b7895564072c7656ebfda4506... >>> >>> >>> >>> On 04/06/2018 03:19 AM, Peter Hudec wrote: >>>> first issue is ansible version, could be solved by virtual env >>>> >>>> FATAL: Current Ansible version (2.4.2.0) is not supported. Supported >>>> versions: 2.4.3.0 or newer >>>> >>>> yum install -y python-virtualenv >>>> virtualenv ansible >>>> . ./ansible/bin/activate >>>> pip install -U pip setuptolls >>>> pip install -U pip setuptools >>>> pip install ansible >>>> >>>> >>>> Second issue is a little bit strange for me >>>> >>>> 2018-04-06 10:00:30,264 p=68226 u=root |  Failure summary: >>>> >>>> >>>>     1. Hosts:    localhost >>>>        Play:     OpenShift Aggregated Logging >>>>        Task:     pulling down signing items from host >>>>        Message:  ESC[0;31mAll items completedESC[0m >>>> >>>> I have found in logs >>>> >>>> 2018-04-06 10:00:28,356 p=68226 u=root |  failed: [localhost] >>>> (item=ca.crl.srl) => { >>>>       "changed": false, >>>>       "invocation": { >>>>           "module_args": { >>>>               "src": "/etc/origin/logging/ca.crl.srl" >>>>           } >>>>       }, >>>>       "item": "ca.crl.srl", >>>>       "msg": "file not found: /etc/origin/logging/ca.crl.srl" >>>> >>>> >>>> Is this good or bad ? >>>> >>>>      Peter >>>> >>>> On 05/04/2018 16:11, Rich Megginson wrote: >>>>> Is it possible that you could start over from scratch, using the >>>>> latest >>>>> instructions/files at >>>>> https://github.com/ViaQ/Main/pull/37/files? >>>>> >>>>> On 04/05/2018 07:19 AM, Peter Hudec wrote: >>>>>> The version is from >>>>>> >>>>>> /usr/share/ansible/openshift-ansible/roles/openshift_facts/library/openshift_facts.py:get_openshift_version >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> [PROD] root(a)dipostat01.cnc.sk: /usr/share/ansible/openshift-ansible # >>>>>> /usr/bin/openshift version >>>>>> openshift v3.10.0-alpha.0+f0186dd-401 >>>>>> kubernetes v1.9.1+a0ce1bc657 >>>>>> etcd 3.2.16 >>>>>> >>>>>> this binary is from the origin-3.7.2-1.el7.git.0.f0186dd.x86_64 >>>>>> package >>>>>> >>>>>> [PROD] root(a)dipostat01.cnc.sk: ~ # rpm -qf /usr/bin/openshift >>>>>> origin-3.7.2-1.el7.git.0.f0186dd.x86_64 >>>>>> >>>>>> Hmm, why the version do not match ? >>>>>> >>>>>>       Peter >>>>>> >>>>>> On 04/04/2018 17:41, Shirly Radco wrote: >>>>>>> Hi, >>>>>>> >>>>>>> >>>>>>> I have a updated the installation instructions for installing >>>>>>> OpenShift >>>>>>> 3.9, based on Rich's work , for the oVirt use case. >>>>>>> >>>>>>> Please make sure where you get the 3.10 rpm and disable that repo. >>>>>>> >>>>>>> This is the PR that includes the metrics store installation of >>>>>>> OpenShift 3.9 >>>>>>> >>>>>>> https://github.com/sradco/ovirt-site/blob/74f1e772c8ca75d4b9e57a3c02cce49... >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> It should be merged soon, but you can use it to install. >>>>>>> >>>>>>> >>>>>>> Please make sure to add the ansible-inventory-origin-39-aio file as >>>>>>> described below. >>>>>>> These are required parameters for the ansible playbook. >>>>>>> >>>>>>> >>>>>>> Best regards, >>>>>>> >>>>>>> -- >>>>>>> >>>>>>> SHIRLY RADCO >>>>>>> >>>>>>> BI SeNIOR SOFTWARE ENGINEER >>>>>>> >>>>>>> Red Hat Israel <https://www.redhat.com/> >>>>>>> >>>>>>> <https://red.ht/sig> >>>>>>> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted> >>>>>>> >>>>>>> >>>>>>> On Wed, Apr 4, 2018 at 5:41 PM, Rich Megginson <rmeggins(a)redhat.com >>>>>>> <mailto:rmeggins@redhat.com>> wrote: >>>>>>> >>>>>>>        I'm sorry.  I misunderstood the request. >>>>>>> >>>>>>>        We are in the process of updating the instructions for >>>>>>> installing >>>>>>>        viaq logging based on upstream origin 3.9 - >>>>>>>        https://github.com/ViaQ/Main/pull/37 >>>>>>>        <https://github.com/ViaQ/Main/pull/37> >>>>>>> >>>>>>>        In the meantime, you can follow along on that PR, and we will >>>>>>> have >>>>>>>        instructions very soon. >>>>>>> >>>>>>> >>>>>>>        On 04/04/2018 08:26 AM, Rich Megginson wrote: >>>>>>> >>>>>>>            On 04/04/2018 08:22 AM, Shirly Radco wrote: >>>>>>> >>>>>>> >>>>>>> >>>>>>>                -- >>>>>>> >>>>>>>                SHIRLY RADCO >>>>>>> >>>>>>>                BI SeNIOR SOFTWARE ENGINEER >>>>>>> >>>>>>>                Red Hat Israel <https://www.redhat.com/> >>>>>>> >>>>>>>                <https://red.ht/sig> >>>>>>>                TRIED. TESTED. TRUSTED. <https://redhat.com/trusted> >>>>>>> >>>>>>> >>>>>>>                On Wed, Apr 4, 2018 at 5:07 PM, Peter Hudec >>>>>>> <phudec(a)cnc.sk >>>>>>>                <mailto:phudec@cnc.sk> <mailto:phudec@cnc.sk >>>>>>>                <mailto:phudec@cnc.sk>>> wrote: >>>>>>> >>>>>>>                    almost the same issue, the versio for openshoft >>>>>>> release >>>>>>>                changed to 3.9 >>>>>>> >>>>>>>                    Failure summary: >>>>>>> >>>>>>> >>>>>>>                      1. Hosts:    localhost >>>>>>>                         Play:     Determine openshift_version to >>>>>>> configure >>>>>>>                on first >>>>>>>                    master >>>>>>>                         Task:     For an RPM install, abort when the >>>>>>> release >>>>>>>                    requested does >>>>>>>                    not match the available version. >>>>>>>                         Message:  You requested openshift_release >>>>>>> 3.9, >>>>>>>                which is not >>>>>>>                    matched by >>>>>>>                                   the latest OpenShift RPM we >>>>>>> detected as >>>>>>>                origin-3.10.0 >>>>>>>                                   on host localhost. >>>>>>>                                   We will only install the latest >>>>>>> RPMs, so >>>>>>>                please ensure >>>>>>>                    you are getting the release >>>>>>>                                   you expect. You may need to adjust >>>>>>> your >>>>>>>                Ansible >>>>>>>                    inventory, modify the repositories >>>>>>>                                   available on the host, or run the >>>>>>>                appropriate OpenShift >>>>>>>                    upgrade playbook. >>>>>>> >>>>>>> >>>>>>>                What is the rpm version installed of >>>>>>> OpenShift origin? >>>>>>>                Do you perhaps have another repo that includes the >>>>>>> OpenShift >>>>>>>                origin-3.10.0? >>>>>>> >>>>>>> >>>>>>>            origin is the upstream version of OpenShift, which is >>>>>>> unsupported. >>>>>>> >>>>>>>            sudo repoquery -i origin >>>>>>> >>>>>>>            This will tell you which repo it came from >>>>>>> >>>>>>>            You will need to disable that repo and uninstall any >>>>>>> packages >>>>>>>            which came from that repo >>>>>>> >>>>>>>            Another mystery is why it is trying to install origin >>>>>>> in the >>>>>>>            first place.  openshift-ansible with >>>>>>>            openshift_deployment_type=openshift-enterprise should not >>>>>>> try to >>>>>>>            install origin, it should install packages with names >>>>>>> like >>>>>>>            atomic-openshift-master, atomic-openshift-node, etc. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>                    On 04/04/2018 14:18, Shirly Radco wrote: >>>>>>>                    > Adding Nicolas since he hit the same issue. >>>>>>>                    > >>>>>>>                    > -- >>>>>>>                    > >>>>>>>                    > SHIRLY RADCO >>>>>>>                    > >>>>>>>                    > BI SeNIOR SOFTWARE ENGINEER >>>>>>>                    > >>>>>>>                    > Red Hat Israel <https://www.redhat.com/> >>>>>>>                    > >>>>>>>                    > <https://red.ht/sig> >>>>>>>                    > TRIED. TESTED. TRUSTED. >>>>>>> <https://redhat.com/trusted> >>>>>>>                    > >>>>>>>                    > >>>>>>>                    > On Wed, Apr 4, 2018 at 3:17 PM, Shirly Radco >>>>>>>                <sradco(a)redhat.com <mailto:sradco@redhat.com> >>>>>>>                <mailto:sradco@redhat.com <mailto:sradco@redhat.com>> >>>>>>>                    > <mailto:sradco@redhat.com >>>>>>> <mailto:sradco@redhat.com> >>>>>>>                <mailto:sradco@redhat.com >>>>>>> <mailto:sradco@redhat.com>>>> >>>>>>> wrote: >>>>>>>                    > >>>>>>>                    >     Hi Peter, >>>>>>>                    > >>>>>>>                    >     The installation instructions currently >>>>>>> support >>>>>>>                OpenShift 3.6. >>>>>>>                    > >>>>>>>                    >     I'm now working on updating them to support >>>>>>> 3.9. >>>>>>>                    > >>>>>>>                    >     You currently have 3.10 installed. >>>>>>>                    > >>>>>>>                    >     Please install OpenShift 3.9 using this >>>>>>> repository >>>>>>>                    > >>>>>>> >>>>>>> https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo >>>>>>> >>>>>>> <https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo> >>>>>>> >>>>>>> <https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo >>>>>>> >>>>>>> <https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo>> >>>>>>>                    > >>>>>>> >>>>>>>    <https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo >>>>>>> >>>>>>> <https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo> >>>>>>> >>>>>>> <https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo >>>>>>> >>>>>>> <https://github.com/ViaQ/Main/blob/master/centos7-viaq.repo>>> >>>>>>>                    > >>>>>>>                    >     And add the following file to your vm >>>>>>>                    > >>>>>>>                    >     Run: >>>>>>>                    >     vi /root/ansible-inventory-origin-39-aio >>>>>>>                    > >>>>>>>                    >     Add: >>>>>>>                    > >>>>>>>                    >     -------------- >>>>>>>                    >     [OSEv3:children] >>>>>>>                    >     nodes >>>>>>>                    >     masters >>>>>>>                    >     etcd >>>>>>>                    > >>>>>>>                    >     [OSEv3:vars] >>>>>>>                    >     ansible_connection=local >>>>>>>                    >     openshift_release=v3.9 >>>>>>>                    >     openshift_logging_install_logging=true >>>>>>>                    >     short_version=3.9 >>>>>>>                    >     openshift_deployment_type=origin >>>>>>>                    > >>>>>>> >>>>>>>  openshift_master_identity_providers=[{'mappingMethod': >>>>>>>                'lookup', >>>>>>>                    >     'challenge': 'true', 'login': 'true', >>>>>>> 'kind': >>>>>>>                    >     'AllowAllPasswordIdentityProvider', 'name': >>>>>>>                'allow_all'}] >>>>>>>                    >     # bug - doesn't use correct tag >>>>>>>                    >     openshift_logging_image_version=v3.9 >>>>>>>                    > >>>>>>> >>>>>>>   openshift_logging_elasticsearch_proxy_image_version=v1.0.0 >>>>>>>                    > >>>>>>>                    >     openshift_logging_es_allow_external=True >>>>>>>                    >     openshift_logging_use_mux=True >>>>>>>                    >     openshift_logging_mux_allow_external=True >>>>>>>                    > >>>>>>>    openshift_logging_mux_file_buffer_storage_type=hostmount >>>>>>>                    > >>>>>>>    openshift_logging_elasticsearch_storage_type=hostmount >>>>>>>                    > >>>>>>> >>>>>>>    openshift_logging_elasticsearch_hostmount_path=/var/lib/elasticsearch >>>>>>> >>>>>>> >>>>>>>                    > >>>>>>>                    >     [nodes] >>>>>>>                    >     localhost storage=True >>>>>>>                openshift_node_labels="{'region': >>>>>>>                    'infra'}" >>>>>>>                    >     openshift_schedulable=True >>>>>>>                    > >>>>>>>                    >     [masters] >>>>>>>                    >     localhost storage=True >>>>>>>                openshift_node_labels="{'region': >>>>>>>                    'infra'}" >>>>>>>                    >     openshift_schedulable=True >>>>>>>                    > >>>>>>>                    >     [etcd] >>>>>>>                    >     localhost storage=True >>>>>>>                openshift_node_labels="{'region': >>>>>>>                    'infra'}" >>>>>>>                    >     openshift_schedulable=True >>>>>>>                    > >>>>>>>                    > >>>>>>>                    >     ------------ >>>>>>>                    > >>>>>>>                    >     Save and exit. >>>>>>>                    > >>>>>>>                    > >>>>>>>                    >     ***Please make sure that you use /var as >>>>>>> your >>>>>>>                Elasticsearch >>>>>>>                    >     persistent storage directory. >>>>>>>                    > >>>>>>>                    >     And when you run the OpenShift ansible >>>>>>>                    > >>>>>>> >>>>>>>    (https://www.ovirt.org/develop/release-management/features/metrics/setting-up-viaq-logging/#running-ansible >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> <https://www.ovirt.org/develop/release-management/features/metrics/setting... >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> <https://www.ovirt.org/develop/release-management/features/metrics/setting... >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> <https://www.ovirt.org/develop/release-management/features/metrics/setting... >>>>>>> >>>>>>> >>>>>>> >>>>>>>                    > >>>>>>> >>>>>>>    <https://www.ovirt.org/develop/release-management/features/metrics/setting-up-viaq-logging/#running-ansible >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> <https://www.ovirt.org/develop/release-management/features/metrics/setting... >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> <https://www.ovirt.org/develop/release-management/features/metrics/setting... >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> <https://www.ovirt.org/develop/release-management/features/metrics/setting...) >>>>>>> >>>>>>> >>>>>>> >>>>>>>                    >     use the file you just created like this: >>>>>>>                    > >>>>>>>                    >     # cd /usr/share/ansible/openshift-ansible >>>>>>>                    >     # (or wherever you cloned the git repo if >>>>>>> using git) >>>>>>>                    >     ANSIBLE_LOG_PATH=/tmp/ansible.log >>>>>>> ansible-playbook >>>>>>>                -vvv -e >>>>>>>                    >     (a)/root/vars.yaml -i >>>>>>>                /root/*ansible-inventory-origin-39-aio* >>>>>>>                    >     playbooks/byo/config.yml >>>>>>>                    > >>>>>>>                    >     Best regards, >>>>>>>                    > >>>>>>>                    >     -- >>>>>>>                    > >>>>>>>                    >     SHIRLY RADCO >>>>>>>                    > >>>>>>>                    >     BI SeNIOR SOFTWARE ENGINEER >>>>>>>                    > >>>>>>>                    >     Red Hat Israel <https://www.redhat.com/> >>>>>>>                    > >>>>>>>                    >     <https://red.ht/sig> >>>>>>>                    >     TRIED. TESTED. TRUSTED. >>>>>>> <https://redhat.com/trusted> >>>>>>>                    > >>>>>>>                    > >>>>>>>                    >     On Wed, Apr 4, 2018 at 12:17 PM, Peter >>>>>>> Hudec >>>>>>>                <phudec(a)cnc.sk <mailto:phudec@cnc.sk> >>>>>>> <mailto:phudec@cnc.sk >>>>>>>                <mailto:phudec@cnc.sk>> >>>>>>>                    >     <mailto:phudec@cnc.sk >>>>>>> <mailto:phudec@cnc.sk> >>>>>>>                <mailto:phudec@cnc.sk <mailto:phudec@cnc.sk>>>> >>>>>>> wrote: >>>>>>>                    > >>>>>>>                    >         Tried to install ovirt metrics, but got >>>>>>> error >>>>>>>                    > >>>>>>>                    >         ANSIBLE_LOG_PATH=/tmp/ansible.log >>>>>>>                ansible-playbook -vvv -e >>>>>>>                    >         (a)/root/vars.yaml -i >>>>>>>                /root/ansible-inventory-origin-37-aio >>>>>>>                    >         playbooks/byo/config.yml >>>>>>>                    > >>>>>>>                    >           1. Hosts:    localhost >>>>>>>                    >              Play:     Determine >>>>>>> openshift_version to >>>>>>>                configure >>>>>>>                    on first >>>>>>>                    >         master >>>>>>>                    >              Task:     For an RPM install, >>>>>>> abort when >>>>>>>                the release >>>>>>>                    >         requested does >>>>>>>                    >         not match the available version. >>>>>>>                    >              Message:  You requested >>>>>>> openshift_release >>>>>>>                3.7, >>>>>>>                    which is not >>>>>>>                    >         matched by >>>>>>>                    >                        the latest OpenShift >>>>>>> RPM we >>>>>>>                detected as >>>>>>>                    origin-3.10.0 >>>>>>>                    >                        on host localhost. >>>>>>>                    >                        We will only install the >>>>>>> latest >>>>>>>                RPMs, so >>>>>>>                    please >>>>>>>                    >         ensure >>>>>>>                    >         you are getting the release >>>>>>>                    >                        you expect. You may >>>>>>> need to >>>>>>>                adjust your >>>>>>>                    Ansible >>>>>>>                    >         inventory, modify the repositories >>>>>>>                    >                        available on the host, >>>>>>> or run >>>>>>>                the appropriate >>>>>>>                    >         OpenShift >>>>>>>                    >         upgrade playbook. >>>>>>>                    > >>>>>>>                    >                 regards >>>>>>>                    >                         Peter >>>>>>>                    > >>>>>>>                    > >>>>>>>                    >         On 04/04/2018 09:13, Fred Rolland >>>>>>> wrote: >>>>>>>                    >         > Hi, >>>>>>>                    >         > >>>>>>>                    >         > Check these links: >>>>>>>                    >         > >>>>>>>                    >         > >>>>>>> >>>>>>> https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/ >>>>>>> >>>>>>> <https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/> >>>>>>> >>>>>>> <https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/ >>>>>>> >>>>>>> <https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/>> >>>>>>>                    > >>>>>>> >>>>>>>    <https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/ >>>>>>> >>>>>>> <https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/> >>>>>>> >>>>>>> <https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/ >>>>>>> >>>>>>> <https://ovirt.org/blog/2018/01/ovirt-report-using-grafana/>>> >>>>>>>                    >         > >>>>>>> >>>>>>> https://ovirt.org/develop/release-management/features/metrics/metrics-store/ >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> <https://ovirt.org/develop/release-management/features/metrics/metrics-sto... >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> <https://ovirt.org/develop/release-management/features/metrics/metrics-store/ >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> <https://ovirt.org/develop/release-management/features/metrics/metrics-sto... >>>>>>> >>>>>>> >>>>>>> >>>>>>>                    > >>>>>>> >>>>>>>    <https://ovirt.org/develop/release-management/features/metrics/metrics-store/ >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> <https://ovirt.org/develop/release-management/features/metrics/metrics-sto... >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> <https://ovirt.org/develop/release-management/features/metrics/metrics-store/ >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> <https://ovirt.org/develop/release-management/features/metrics/metrics-sto... >>>>>>> >>>>>>> >>>>>>> >>>>>>>                    >         > >>>>>>>                    >         > Regards, >>>>>>>                    >         > Fred >>>>>>>                    >         > >>>>>>>                    >         > On Tue, Apr 3, 2018 at 9:38 AM, >>>>>>> Anantha >>>>>>> Raghava >>>>>>>                    >         > <raghav(a)exzatechconsulting.com >>>>>>>                <mailto:raghav@exzatechconsulting.com> >>>>>>>                    <mailto:raghav@exzatechconsulting.com >>>>>>>                <mailto:raghav@exzatechconsulting.com>> >>>>>>>                    >         <mailto:raghav@exzatechconsulting.com >>>>>>>                <mailto:raghav@exzatechconsulting.com> >>>>>>>                    <mailto:raghav@exzatechconsulting.com >>>>>>>                <mailto:raghav@exzatechconsulting.com>>> >>>>>>>                    >         <mailto:raghav@exzatechconsulting.com >>>>>>>                <mailto:raghav@exzatechconsulting.com> >>>>>>>                    <mailto:raghav@exzatechconsulting.com >>>>>>>                <mailto:raghav@exzatechconsulting.com>> >>>>>>>                    >         <mailto:raghav@exzatechconsulting.com >>>>>>>                <mailto:raghav@exzatechconsulting.com> >>>>>>>                    <mailto:raghav@exzatechconsulting.com >>>>>>>                <mailto:raghav@exzatechconsulting.com>>>>> >>>>>>>                    >         > wrote: >>>>>>>                    >         > >>>>>>>                    >         >     Hi, >>>>>>>                    >         > >>>>>>>                    >         >     I see that oVirt DWH is installed >>>>>>> with >>>>>>>                Version >>>>>>>                    4.2.x. Now, how do I >>>>>>>                    >         >     take the reports? I version 3.5, >>>>>>> we had >>>>>>>                Jasper >>>>>>>                    reports module using >>>>>>>                    >         >     which we could take utilization >>>>>>> reports. >>>>>>>                Can we do >>>>>>>                    something similar >>>>>>>                    >         >     here? >>>>>>>                    >         > >>>>>>>                    >         >     -- >>>>>>>                    >         > >>>>>>>                    >         >     Thanks & Regards, >>>>>>>                    >         > >>>>>>>                    >         > >>>>>>>                    >         >     Anantha Raghava >>>>>>>                    >         > >>>>>>>                    >         > >>>>>>>                    >         >     Do not print this e-mail unless >>>>>>>                required. Save >>>>>>>                    Paper & trees. >>>>>>>                    >         > >>>>>>>                    >         > >>>>>>>                    >         > >>>>>>>    _______________________________________________ >>>>>>>                    >         >     Users mailing list >>>>>>>                    >         > Users(a)ovirt.org >>>>>>> <mailto:Users@ovirt.org> >>>>>>>                <mailto:Users@ovirt.org <mailto:Users@ovirt.org>> >>>>>>>                    <mailto:Users@ovirt.org <mailto:Users@ovirt.org> >>>>>>>                <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>> >>>>>>>                    >         <mailto:Users@ovirt.org >>>>>>>                <mailto:Users@ovirt.org> <mailto:Users@ovirt.org >>>>>>>                <mailto:Users@ovirt.org>> >>>>>>>                    <mailto:Users@ovirt.org <mailto:Users@ovirt.org> >>>>>>>                <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>>> >>>>>>>                    >         > >>>>>>>                http://lists.ovirt.org/mailman/listinfo/users >>>>>>>                <http://lists.ovirt.org/mailman/listinfo/users> >>>>>>>                    <http://lists.ovirt.org/mailman/listinfo/users >>>>>>>                <http://lists.ovirt.org/mailman/listinfo/users>> >>>>>>>                    >  <http://lists.ovirt.org/mailman/listinfo/users >>>>>>>                <http://lists.ovirt.org/mailman/listinfo/users> >>>>>>>                    <http://lists.ovirt.org/mailman/listinfo/users >>>>>>>                <http://lists.ovirt.org/mailman/listinfo/users>>> >>>>>>>                    >         > >>>>>>>                 <http://lists.ovirt.org/mailman/listinfo/users >>>>>>>                <http://lists.ovirt.org/mailman/listinfo/users> >>>>>>>                    <http://lists.ovirt.org/mailman/listinfo/users >>>>>>>                <http://lists.ovirt.org/mailman/listinfo/users>> >>>>>>>                    >  <http://lists.ovirt.org/mailman/listinfo/users >>>>>>>                <http://lists.ovirt.org/mailman/listinfo/users> >>>>>>>                <http://lists.ovirt.org/mailman/listinfo/users >>>>>>>                <http://lists.ovirt.org/mailman/listinfo/users>>>> >>>>>>>                    >         > >>>>>>>                    >         > >>>>>>>                    >         > >>>>>>>                    >         > >>>>>>>                    >         > >>>>>>> _______________________________________________ >>>>>>>                    >         > Users mailing list >>>>>>>                    >         > Users(a)ovirt.org >>>>>>> <mailto:Users@ovirt.org> >>>>>>>                <mailto:Users@ovirt.org <mailto:Users@ovirt.org>> >>>>>>>                    <mailto:Users@ovirt.org <mailto:Users@ovirt.org> >>>>>>>                <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>> >>>>>>>                    >         > >>>>>>>                http://lists.ovirt.org/mailman/listinfo/users >>>>>>>                <http://lists.ovirt.org/mailman/listinfo/users> >>>>>>>                    <http://lists.ovirt.org/mailman/listinfo/users >>>>>>>                <http://lists.ovirt.org/mailman/listinfo/users>> >>>>>>>                    >  <http://lists.ovirt.org/mailman/listinfo/users >>>>>>>                <http://lists.ovirt.org/mailman/listinfo/users> >>>>>>>                    <http://lists.ovirt.org/mailman/listinfo/users >>>>>>>                <http://lists.ovirt.org/mailman/listinfo/users>>> >>>>>>>                    >         > >>>>>>>                    > >>>>>>>                    > >>>>>>>                    >         -- >>>>>>>                    >         *Peter Hudec* >>>>>>>                    >         Infraštruktúrny architekt >>>>>>>                    > phudec(a)cnc.sk <mailto:phudec@cnc.sk> >>>>>>>                <mailto:phudec@cnc.sk <mailto:phudec@cnc.sk>> >>>>>>>                <mailto:phudec@cnc.sk <mailto:phudec@cnc.sk> >>>>>>>                    <mailto:phudec@cnc.sk <mailto:phudec@cnc.sk>>> >>>>>>>                <mailto:phudec@cnc.sk <mailto:phudec@cnc.sk> >>>>>>>                <mailto:phudec@cnc.sk <mailto:phudec@cnc.sk>> >>>>>>>                    >        <mailto:phudec@cnc.sk >>>>>>> <mailto:phudec@cnc.sk> >>>>>>>                <mailto:phudec@cnc.sk <mailto:phudec@cnc.sk>>>> >>>>>>>                    > >>>>>>>                    >         *CNC, a.s.* >>>>>>>                    >         Borská 6, 841 04 Bratislava >>>>>>>                    >         Recepcia: +421 2  35 000 100 >>>>>>>                    > >>>>>>>                    >         Mobil:+421 905 997 203 >>>>>>>                    >         *www.cnc.sk <http://www.cnc.sk> >>>>>>>                <http://www.cnc.sk> <http://www.cnc.sk>* >>>>>>>                    <http:///www.cnc.sk <http://www.cnc.sk> >>>>>>> <http://www.cnc.sk> >>>>>>>                    >         <http://www.cnc.sk>> >>>>>>>                    > >>>>>>>                    > >>>>>>>    _______________________________________________ >>>>>>>                    >         Users mailing list >>>>>>>                    > Users(a)ovirt.org <mailto:Users@ovirt.org> >>>>>>>                <mailto:Users@ovirt.org <mailto:Users@ovirt.org>> >>>>>>>                <mailto:Users@ovirt.org <mailto:Users@ovirt.org> >>>>>>>                    <mailto:Users@ovirt.org >>>>>>> <mailto:Users@ovirt.org>>> >>>>>>>                    > http://lists.ovirt.org/mailman/listinfo/users >>>>>>>                <http://lists.ovirt.org/mailman/listinfo/users> >>>>>>>                    <http://lists.ovirt.org/mailman/listinfo/users >>>>>>>                <http://lists.ovirt.org/mailman/listinfo/users>> >>>>>>>                    >  <http://lists.ovirt.org/mailman/listinfo/users >>>>>>>                <http://lists.ovirt.org/mailman/listinfo/users> >>>>>>>                    <http://lists.ovirt.org/mailman/listinfo/users >>>>>>>                <http://lists.ovirt.org/mailman/listinfo/users>>> >>>>>>>                    > >>>>>>>                    > >>>>>>>                    > >>>>>>> >>>>>>> >>>>>>>                    -- >>>>>>>                    *Peter Hudec* >>>>>>>                    Infraštruktúrny architekt >>>>>>>                    phudec(a)cnc.sk <mailto:phudec@cnc.sk> >>>>>>>                <mailto:phudec@cnc.sk <mailto:phudec@cnc.sk>> >>>>>>>                <mailto:phudec@cnc.sk <mailto:phudec@cnc.sk> >>>>>>>                    <mailto:phudec@cnc.sk <mailto:phudec@cnc.sk>>> >>>>>>> >>>>>>>                    *CNC, a.s.* >>>>>>>                    Borská 6, 841 04 Bratislava >>>>>>>                    Recepcia: +421 2  35 000 100 >>>>>>> >>>>>>>                    Mobil:+421 905 997 203 >>>>>>>                    *www.cnc.sk <http://www.cnc.sk> >>>>>>> <http://www.cnc.sk>* >>>>>>>                <http:///www.cnc.sk <http://www.cnc.sk> >>>>>>>                    <http://www.cnc.sk>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>