Hi Juan, Refer to this post, the state of affairs didn't chagne since then: http://lists.ovirt.org/pipermail/users/2013-May/014429.html David On Po, 2014-11-24 at 11:48 +0100, Juan Jose wrote:
Hello Lev and Michal and everybody,
My main question is:
Is it necessary to install in Windows 7 client, no in the guest, the usbclerk to be able to get USB pen drive into the VM from the Windows 7 client?, in afirmative case, where can I get usbclerk?
Many thanks in advanced,
Juanjo.
On Sun, Nov 23, 2014 at 9:42 AM, Lev Veyde <lveyde@redhat.com> wrote: Hi Michal,
As far as I know there is no need to install something inside VM for the Native USB redirection to function properly, thus nothing related is included on the oVirt WGT ISO.
The user/admin only needs to properly configure the VM for Native USB redirection and install the Spice client.
I forwarded the issue to the Spice team, they could properly point to the issue.
Thanks in advance, Lev Veyde.
----- Original Message ----- From: "Michal Skrivanek" <michal.skrivanek@redhat.com> To: "Juan Jose" <jj197005@gmail.com>, "Lev Veyde" <lveyde@redhat.com> Cc: "users@ovirt.org List" <users@ovirt.org> Sent: Friday, November 21, 2014 3:07:09 PM Subject: Re: [ovirt-users] USB redirect
On Nov 13, 2014, at 12:00 , Juan Jose <jj197005@gmail.com> wrote:
> Hello Michal and everybody, > > I'm sorry but I have downloaded ovirt-guest-tools from URL you gave me but the driver usbredir is not there. Is it normal or maybe it is in another resource? > > As the oVirt documentation says, when this driver is installed a new USB windows service will be started in the client, but after execute the ovirt-guest-tool setup and finish the installation there is not any USB new service in my Windows client. > > Is it possible that this usbredir driver is not in this ISO?
adding Lev who builds the ISO…can you please check?
Thanks, michal
> > Many thanks in advanced, > > Juanjo. > > On Wed, Nov 12, 2014 at 4:55 PM, Juan Jose <jj197005@gmail.com> wrote: > Many thanks Michal, > > I will try it and I will try to upgrade my oVirt 3.4. > > Thanks again and best regards, > > Juanjo. > > On Wed, Nov 12, 2014 at 4:45 PM, Michal Skrivanek <michal.skrivanek@redhat.com> wrote: > > On Nov 12, 2014, at 16:39 , Juan Jose <jj197005@gmail.com> wrote: > > > Hello Michal or everybody, > > > > Could you tell me where can I get or download ovirt-guest-tool.iso? > > Hi, > it's a regular part of the 3.5 release... > http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-guest-tools/ > enjoy!:) > > Thanks, > michal > > > > > Many thanks in advanced, > > > > Juanjo. > > > > > > On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek <michal.skrivanek@redhat.com> wrote: > > > > On Nov 11, 2014, at 11:08 , Juan Jose <jj197005@gmail.com> wrote: > > > > > Thank you very much Michal, If I have checked Device administrator in my Windows 7 VM and as you can see in the attached image, the USB device is correctly installed. But when I click "File" in remote-viewer "USB device selection" appears in grey and I can't select any USB device. > > > > > > Is there any other requirement to be able redirect USB devices?, Is it necessary to install usbclerk in Windows clients to redirect USB to the Windows guest? > > > > usbredir drivers yes, you need them, they should be on the guest tools iso > > > > Thanks, > > michal > > > > > > > > Many thanks in advanced, > > > > > > Juanjo. > > > > > > On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek <michal.skrivanek@redhat.com> wrote: > > > > > > On Nov 10, 2014, at 17:54 , Juan Jose <jj197005@gmail.com> wrote: > > > > > > > Hello everybody, > > > > > > > > I have an oVirt 3.4 deployment and I have some Windows 7 Enterprise 32 bits guests. I can't redirect USB from a Windows 7 client. I'm using remote - viewer as console. Also I have observed something wrong in my administration portal. The oVirt documentation says that I have to select Native USB mode in console properties in VM configuration > > > > > > yes, that's the only supported way > > > you should see the USB controller in devices > > > > > > > but after select this mode, it doesn't remain. If I check this value in console configuration again I can see disabled, native mode value have been changed. > > > > > > there used to be such issue in 3.4..it is fixed in 3.5 already. > > > It should be a UI problem only… > > > > > > Thanks, > > > michal > > > > > > > > > > > Is there someone have had this problem?, and how I can solve it?, is it necessary to install in Windows clients us clerk software? > > > > > > > > Many thanks in advanced. > > > > > > > > Juanjo. > > > > _______________________________________________ > > > > Users mailing list > > > > Users@ovirt.org > > > > http://lists.ovirt.org/mailman/listinfo/users > > > > > > > > > <DeviceAdministrator.png> > > > > > > >
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users