Yep work good !
Adding
ETHTOOL_OPTIONS='-K iface lro off'
to the slave interfaces config file did the job :)
Thank you !
On Wed, 2016-05-25 at 10:37 +0100, Alex Crow wrote:
On 25/05/16 10:28, Maxence Sartiaux wrote:
> Hello,
>
>
> I've a problem, all my ovirt hosts are linked with a bonding mode 4
> (802.3ad LACP) 2x10Gbps
> Eveything is okay with unix guest but with Windows guest, i can
> ping but internet browsing is impossible (sometime i have a part of
> the page, very rare case)
>
>
> If i remove the bonding and bridge one interface, windows work
> good.
>
>
> I've tried with windows 7 and windows 10, guest additions are
> installed
> VirtIO / rtl3189 tested, same problem
>
>
> My bonding opts : mode=4 lacp_rate=1 miimon=100
> Interface MTU 9000
>
>
> Bonding mode 2 also tested
>
On the hosts, try setting LRO off on the members of your bond, see if
it makes a difference
eg,
ethtool -K ens3f0 lro off
ethtool -K ens3f1 lro off
Alex
--
This message is intended only for the addressee and may contain
confidential information. Unless you are that person, you may not
disclose its contents or use it in any way and are requested to
delete
the message along with any attachments and notify us immediately.
This email is not intended to, nor should it be taken to, constitute
advice.
The information provided is correct to our knowledge & belief and
must not
be used as a substitute for obtaining tax, regulatory, investment,
legal or
any other appropriate advice.
"Transact" is operated by Integrated Financial Arrangements Ltd.
29 Clement's Lane, London EC4N 7AE. Tel: (020) 7608 4900 Fax: (020)
7608 5300.
(Registered office: as above; Registered in England and Wales under
number: 3727592). Authorised and regulated by the Financial Conduct
Authority (entered on the Financial Services Register; no. 190856).
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users