Re: [ovirt-users] Power Management config on Ovirt

From this point there's is nothing that can be done, because engine cannot

From: "Renchu Mathew" <renchu(a)cracknell.com&gt; To: "Martin Perina" <mperina(a)redhat.com&gt; Cc: users(a)ovirt.org Sent: Tuesday, March 17, 2015 3:53:24 PM Subject: RE: [ovirt-users] Power Management config on Ovirt Hi Martin, Please find attached the log files. Regards Renchu Mathew -----Original Message----- From: Martin Perina [mailto:mperina@redhat.com] Sent: Tuesday, March 17, 2015 6:40 PM To: Renchu Mathew Cc: users(a)ovirt.org Subject: Re: [ovirt-users] Power Management config on Ovirt Hi, please attach new logs, so we can investigate what has happened. Thanks Martin Perina ----- Original Message ----- > From: "Renchu Mathew" <renchu(a)cracknell.com&gt; > To: "Martin Perina" <mperina(a)redhat.com&gt; > Cc: "Piotr Kliczewski" <piotr.kliczewski(a)gmail.com&gt;, users(a)ovirt.org > Sent: Tuesday, March 17, 2015 3:34:11 PM > Subject: RE: [ovirt-users] Power Management config on Ovirt > > Hi Martin, > > I did the same as below. But is still does the same. Node01 is > shutdown. Do you think RHEV + gluster storage will not have this > issue. What storage do you recommend? > > Regards > > Renchu Mathew > > -----Original Message----- > From: Martin Perina [mailto:mperina@redhat.com] > Sent: Tuesday, March 17, 2015 5:35 PM > To: Renchu Mathew > Cc: Piotr Kliczewski; users(a)ovirt.org > Subject: Re: [ovirt-users] Power Management config on Ovirt > > Hi, > > I don't know much about gluster configuration, but one of the > following should work: > > 1. Turn off you host networking completely for example using /sbin/ifdown > (you will need to access your node locally or using remote serial > console, for example IPMI) > > 2. Block engine and all gluster hosts using iptables > > 3. Disable "Skip fencing if host has live lease on storage" option > in Cluster Fencing Policy and block connection between host and engine > (in this case storage connection won't be checked prior to fencing) > > > Martin Perina > > > ----- Original Message ----- > > From: "Renchu Mathew" <renchu(a)cracknell.com&gt; > > To: "Martin Perina" <mperina(a)redhat.com&gt; > > Cc: "Piotr Kliczewski" <piotr.kliczewski(a)gmail.com&gt;, users(a)ovirt.org > > Sent: Tuesday, March 17, 2015 2:26:29 PM > > Subject: RE: [ovirt-users] Power Management config on Ovirt > > > > Martin, > > Yes, I need to test the VM migration. So can you please tell me how > > to block the host connection to storage? It is a glusterfs volume > > with distribute option as below. > > > > Volume Name: VM-Store > > Type: Distribute > > Volume ID: 59e40310-476d-449f-b700-cab69b829930 > > Status: Started > > Number of Bricks: 1 > > Transport-type: tcp > > Bricks: > > Brick1: storage1:/VM/VM-Store > > Options Reconfigured: > > server.allow-insecure: on > > storage.owner-gid: 36 > > storage.owner-uid: 36 > > > > Many thanks for all of your support. > > > > Regards > > > > Renchu Mathew  |  Sr. IT Administrator > > > > > > > > CRACKNELL  DUBAI   |  P.O. Box 66231  |   United Arab Emirates  |  T > > +971 4 > > 3445417  |  F +971 4 3493675 |  M +971 50 7386484 ABU DHABI | DUBAI > > | LONDON | MUSCAT | DOHA | JEDDAH EMAIL renchu(a)cracknell.com | WEB > > www.cracknell.com > > > > This email, its content and any files transmitted with it are > > intended solely for the addressee(s) and may be legally privileged > > and/or confidential. If you are not the intended recipient please > > let us know by email reply and delete it from the system. Please > > note that any views or opinions presented in this email do not > > necessarily represent those of the company. Email transmissions > > cannot be guaranteed to be secure or error-free as information could > > be intercepted, corrupted, lost, destroyed, arrive late or > > incomplete, or contain viruses. The company therefore does not > > accept liability for any errors or omissions in the contents of this > > message which arise as a result of email transmission. > > > > > > -----Original Message----- > > From: Martin Perina [mailto:mperina@redhat.com] > > Sent: Tuesday, March 17, 2015 5:02 PM > > To: Renchu Mathew > > Cc: Piotr Kliczewski; users(a)ovirt.org > > Subject: Re: [ovirt-users] Power Management config on Ovirt > > > > Hi, > > > > your VM was not migrated, because host node02 was not fenced. And > > host > > node02 was not fenced, because option "Skip fencing if host has live > > lease on storage" in your Cluster Fencing Policy is enabled. Prior > > fencing of the host we check its storage connection (renewal of its > > sanlock lease). > > You should see an alert about it in Events/Alerts tab in webadmin. > > > > So if you want to test VM migration on your cluster, have also block > > host connection to storage (and not only to engine). > > > > Also please take a look at "Skip fencing on cluster connectivity issues" > > option in Cluster Fencing Policy. If it's enabled and set for > > example to 50% and you have only two hosts in cluster, then your > > hosts won't be fenced at all due to it. > > > > Thanks > > > > Martin Perina > > > > > > ----- Original Message ----- > > > From: "Renchu Mathew" <renchu(a)cracknell.com&gt; > > > To: "Piotr Kliczewski" <piotr.kliczewski(a)gmail.com&gt; > > > Cc: "Piotr Kliczewski" <pkliczew(a)redhat.com&gt;, users(a)ovirt.org > > > Sent: Tuesday, March 17, 2015 1:37:28 PM > > > Subject: Re: [ovirt-users] Power Management config on Ovirt > > > > > > Piotr, > > > > > > Please find attached log files. If I stop the network of node02, > > > the VM > > > (Printserver) running on that is not automatically migrating to > > > node01 instead node01 is getting shutdown. > > > > > > Regards > > > > > > Renchu Mathew  |  Sr. IT Administrator > > > > > > > > > > > > CRACKNELL  DUBAI   |  P.O. Box 66231  |   United Arab Emirates  | > > > T > > > +971 4 > > > 3445417  |  F +971 4 3493675 |  M +971 50 7386484 ABU DHABI | > > > DUBAI > > > | LONDON | MUSCAT | DOHA | JEDDAH EMAIL renchu(a)cracknell.com | WEB > > > www.cracknell.com > > > > > > This email, its content and any files transmitted with it are > > > intended solely for the addressee(s) and may be legally privileged > > > and/or confidential. If you are not the intended recipient please > > > let us know by email reply and delete it from the system. Please > > > note that any views or opinions presented in this email do not > > > necessarily represent those of the company. Email transmissions > > > cannot be guaranteed to be secure or error-free as information > > > could be intercepted, corrupted, lost, destroyed, arrive late or > > > incomplete, or contain viruses. The company therefore does not > > > accept liability for any errors or omissions in the contents of > > > this message which arise as a result of email transmission. > > > > > > > > > -----Original Message----- > > > From: Piotr Kliczewski [mailto:piotr.kliczewski@gmail.com] > > > Sent: Tuesday, March 17, 2015 3:35 PM > > > To: Renchu Mathew > > > Cc: Piotr Kliczewski; Eli Mesika; users(a)ovirt.org > > > Subject: Re: [ovirt-users] Power Management config on Ovirt > > > > > > On Tue, Mar 17, 2015 at 12:18 PM, Renchu Mathew > > > <renchu(a)cracknell.com&gt; > > > wrote: > > > > Hi Piotr, > > > > > > > > I have re-installed the node with ovirt node 3.5 latest version > > > > and tried the power management and it shows test succeeded, on > > > > but if I stop the network of one of the node the running vm is > > > > not migrating to the other instead both the nodes are getting down. > > > > Can anybody help me on this? > > > > > > > > > > Please provide engine and both nodes logs for analysis. > > > > > > > > > > > Also is it possible to use the resources (CPU cores and memory) > > > > from other node in the same cluster or combine 2 nodes in same > > > > clusters and create a vm on that. > > > > > > > > Regards > > > > > > > > Renchu Mathew > > > > > > > > -----Original Message----- > > > > From: Piotr Kliczewski [mailto:pkliczew@redhat.com] > > > > Sent: Tuesday, January 27, 2015 2:04 PM > > > > To: Renchu Mathew > > > > Cc: Piotr Kliczewski; Eli Mesika; users(a)ovirt.org > > > > Subject: Re: [ovirt-users] Power Management config on Ovirt > > > > > > > > > > > > > > > > > > > > > > > > ----- Original Message ----- > > > >> From: "Renchu Mathew" <renchu(a)cracknell.com&gt; > > > >> To: "Piotr Kliczewski" <pkliczew(a)redhat.com&gt; > > > >> Cc: "Piotr Kliczewski" <piotr.kliczewski(a)gmail.com&gt;, "Eli Mesika" > > > >> <emesika(a)redhat.com&gt;, users(a)ovirt.org > > > >> Sent: Tuesday, January 27, 2015 10:48:12 AM > > > >> Subject: RE: [ovirt-users] Power Management config on Ovirt > > > >> > > > >> Hi Piotr, > > > >> > > > >> Can you please provide me the link to download the new node iso? > > > >> I can see only ovirt live iso. > > > >> > > > > > > > > I saw that Douglas sent following links in other thread [1] on > > > > this > > > > list: > > > > > > > > centos7: > > > > http://jenkins.ovirt.org/job/ovirt-node_master_create-iso-el7_me > > > > rg > > > > ed > > > > / > > > > > > > > Fedora20: > > > > http://jenkins.ovirt.org/job/ovirt-node_master_create-iso-fc20_m > > > > er > > > > ge > > > > d/ > > > > > > > > Please note that "We should share the official iso this week." > > > > > > > > [1] > > > > http://lists.ovirt.org/pipermail/users/2015-January/030846.html > > > > > > > >> > > > >> Regards > > > >> > > > >> Renchu Mathew > > > >> > > > >> -----Original Message----- > > > >> From: Piotr Kliczewski [mailto:pkliczew@redhat.com] > > > >> Sent: Tuesday, January 27, 2015 12:21 PM > > > >> To: Renchu Mathew > > > >> Cc: Piotr Kliczewski; Eli Mesika; users(a)ovirt.org > > > >> Subject: Re: [ovirt-users] Power Management config on Ovirt > > > >> > > > >> Hi Mathew, > > > >> > > > >> It seems like this is quite old version (September 2014). There > > > >> were good number of fixes in this area. > > > >> > > > >> Looking at provided logs I am not able to tell which call is > > > >> exactly failing. > > > >> Do you have any steps to reproduce? > > > >> > > > >> Thanks, > > > >> Piotr > > > >> > > > >> ----- Original Message ----- > > > >> From: "Renchu Mathew" <renchu(a)cracknell.com&gt; > > > >> To: "Piotr Kliczewski" <piotr.kliczewski(a)gmail.com&gt; > > > >> Cc: "Eli Mesika" <emesika(a)redhat.com&gt;, "Piotr Kliczewski" > > > >> <pkliczew(a)redhat.com&gt;, users(a)ovirt.org > > > >> Sent: Monday, January 26, 2015 5:15:46 AM > > > >> Subject: RE: [ovirt-users] Power Management config on Ovirt > > > >> > > > >> Hi Piotr, > > > >> VDSM Version is vdsm-4.16.4-0.el6 > > > >> > > > >> Regards > > > >> > > > >> Renchu Mathew > > > >> . > > > >> > > > >> From: Piotr Kliczewski [mailto:piotr.kliczewski@gmail.com] > > > >> Sent: Sunday, January 25, 2015 6:08 PM > > > >> To: Renchu Mathew > > > >> Cc: Eli Mesika; Piotr Kliczewski; users(a)ovirt.org > > > >> Subject: Re: [ovirt-users] Power Management config on Ovirt > > > >> > > > >> > > > >> > > > >> On Sun, Jan 25, 2015 at 2:07 PM, Renchu Mathew > > > >> <renchu@cracknell.com<mailto:renchu@cracknell.com>> wrote: > > > >> > > > >> Hi Eli, > > > >> > > > >> > > > >> > > > >> I have 2 hypervisor host and both are installed with below iso file. > > > >> Master data domain is glusterfs which is configured on another > > > >> server. > > > >> Is there any latest iso available? > > > >> > > > >> > > > >> > > > >> ovirt-node-iso-3.5.0.ovirt35.20140912.el6 (Edited). > > > >> > > > >> @Eli - Do we know which vdsm version is in this iso? > > > >> > > > >> > > > >> > > > >> > > > >> Please find below details. > > > >> > > > >> > > > >> > > > >> [cid:image001.png@01D0393F.9A5CF2D0] > > > >> > > > >> > > > >> > > > >> Thanks & Regards > > > >> > > > >> > > > >> > > > >> Renchu Mathew > > > >> > > > >> > > > >> > > > >> -----Original Message----- > > > >> From: Eli Mesika > > > >> [mailto:emesika@redhat.com<mailto:emesika@redhat.com>] > > > >> Sent: Sunday, January 25, 2015 4:46 PM > > > >> To: Renchu Mathew > > > >> Cc: Martin Perina; users@ovirt.org<mailto:users@ovirt.org>; > > > >> Piotr Kliczewski > > > >> Subject: Re: [ovirt-users] Power Management config on Ovirt > > > >> > > > >> > > > >> > > > >> > > > >> > > > >> > > > >> > > > >> ----- Original Message ----- > > > >> > > > >> > From: "Renchu Mathew" > > > >> > <renchu@cracknell.com<mailto:renchu@cracknell.com>> > > > >> > > > >> > To: "Eli Mesika" > > > >> > <emesika@redhat.com<mailto:emesika@redhat.com>> > > > >> > > > >> > Cc: "Martin Perina" > > > >> > <mperina@redhat.com<mailto:mperina@redhat.com>>, > > > >> > users@ovirt.org<mailto:users@ovirt.org> > > > >> > > > >> > Sent: Sunday, January 25, 2015 11:19:21 AM > > > >> > > > >> > Subject: RE: [ovirt-users] Power Management config on Ovirt > > > >> > > > >> > > > > >> > > > >> > Hi Eli, > > > >> > > > >> > > > > >> > > > >> > Please use any details. > > > >> > > > >> > > > > >> > > > >> > Thanks for your support. > > > >> > > > >> > > > > >> > > > >> > Regards > > > >> > > > >> > > > > >> > > > >> > Renchu Mathew > > > >> > > > >> > > > >> > > > >> Hi again > > > >> > > > >> > > > >> > > > >> Looking in the logs I see that this is a issue we handled when > > > >> we switched from XML RPC to JSON RPC protocol. > > > >> > > > >> Which vdsm is installed in the proxy host ? > > > >> > > > >> I am adding Piotr who is on charge of the JSON RPC protocol and > > > >> who helped me in the past when I got a similar error on PM > > > >> operations > > > >> > > > >> It looks like marshaling issue but I am not sure whether it was > > > >> already fixed or it is something new. I am not able to match a > > > >> call when looking at engine.log. > > > >> > > > >> > > > >> > > > >> > > > >> > > > >> > > > > >> > > > >> > -----Original Message----- > > > >> > > > >> > From: Eli Mesika > > > >> > [mailto:emesika@redhat.com<mailto:emesika@redhat.com>] > > > >> > > > >> > Sent: Sunday, January 25, 2015 12:58 PM > > > >> > > > >> > To: Renchu Mathew > > > >> > > > >> > Cc: Martin Perina; users@ovirt.org<mailto:users@ovirt.org> > > > >> > > > >> > Subject: Re: [ovirt-users] Power Management config on Ovirt > > > >> > > > >> > > > > >> > > > >> > Hi Renchu > > > >> > > > >> > > > > >> > > > >> > I am looking currently on he case and will respond later on > > > >> > today > > > >> > > > >> > after investigating the logs. > > > >> > > > >> > If I will not find anything, can I use the details for the > > > >> > host PM > > > >> > > > >> > only for status command to try to debug and find the source > > > >> > of the problem ? > > > >> > > > >> > > > > >> > > > >> > Thanks > > > >> > > > >> > > > > >> > > > >> > Eli > > > >> > > > >> > > > > >> > > > >> > ----- Original Message ----- > > > >> > > > >> > > From: "Renchu Mathew" > > > >> > > <renchu@cracknell.com<mailto:renchu@cracknell.com>> > > > >> > > > >> > > To: "Martin Perina" > > > >> > > <mperina@redhat.com<mailto:mperina@redhat.com>> > > > >> > > > >> > > Cc: users@ovirt.org<mailto:users@ovirt.org>, "Eli Mesika" > > > >> > > <emesika@redhat.com<mailto:emesika@redhat.com>> > > > >> > > > >> > > Sent: Sunday, January 25, 2015 6:50:00 AM > > > >> > > > >> > > Subject: RE: [ovirt-users] Power Management config on Ovirt > > > >> > > > >> > > > > > >> > > > >> > > Hi Martin, > > > >> > > > >> > > > > > >> > > > >> > > I got the below output when I run the command and it works > > > >> > > from both > > > >> > > > >> > > the nodes. > > > >> > > > >> > > > > > >> > > > >> > > fence_ipmilan -a 192.168.1.114 -l admin -p admin -o status > > > >> > > -v -P > > > >> > > > >> > > > > > >> > > > >> > > Getting status of IPMI:192.168.1.114...Spawning: > > > >> > > '/usr/bin/ipmitool > > > >> > > > >> > > -I lanplus -H '192.168.1.114' -U 'admin' -P '[set]' -v > > > >> > > chassis power > > > >> > > > >> > > status'... > > > >> > > > >> > > Chassis power = On > > > >> > > > >> > > Done > > > >> > > > >> > > > > > >> > > > >> > > Thanks > > > >> > > > >> > > > > > >> > > > >> > > Renchu Mathew | Sr. IT Administrator > > > >> > > > >> > > > > > >> > > > >> > > > > > >> > > > >> > > > > > >> > > > >> > > CRACKNELL DUBAI | P.O. Box 66231 | United Arab Emirates > > > >> > > | > > > >> > > T > > > >> > > > >> > > +971 4 > > > >> > > > >> > > 3445417 | F +971 4 3493675<tel:%2B971%204%203493675> | M > > > >> > > +971 > > > >> > > 50 7386484<tel:%2B971%2050%207386484> ABU DHABI | DUBAI > > > >> > > > >> > > | LONDON | MUSCAT | DOHA | JEDDAH EMAIL > > > >> > > | renchu@cracknell.com<mailto:renchu@cracknell.com> | WEB > > > >> > > > >> > > www.cracknell.com<http://www.cracknell.com> > > > >> > > > >> > > > > > >> > > > >> > > This email, its content and any files transmitted with it > > > >> > > are > > > >> > > > >> > > intended solely for the addressee(s) and may be legally > > > >> > > privileged > > > >> > > > >> > > and/or confidential. If you are not the intended recipient > > > >> > > please > > > >> > > > >> > > let us know by email reply and delete it from the system. > > > >> > > Please > > > >> > > > >> > > note that any views or opinions presented in this email do > > > >> > > not > > > >> > > > >> > > necessarily represent those of the company. Email > > > >> > > transmissions > > > >> > > > >> > > cannot be guaranteed to be secure or error-free as > > > >> > > information could > > > >> > > > >> > > be intercepted, corrupted, lost, destroyed, arrive late or > > > >> > > > >> > > incomplete, or contain viruses. The company therefore does > > > >> > > not > > > >> > > > >> > > accept liability for any errors or omissions in the > > > >> > > contents of this > > > >> > > > >> > > message which arise as a result of email transmission. > > > >> > > > >> > > > > > >> > > > >> > > > > > >> > > > >> > > -----Original Message----- > > > >> > > > >> > > From: Martin Perina > > > >> > > [mailto:mperina@redhat.com<mailto:mperina@redhat.com>] > > > >> > > > >> > > Sent: Thursday, January 22, 2015 6:12 PM > > > >> > > > >> > > To: Renchu Mathew > > > >> > > > >> > > Cc: users@ovirt.org<mailto:users@ovirt.org>; Eli Mesika > > > >> > > > >> > > Subject: Re: [ovirt-users] Power Management config on Ovirt > > > >> > > > >> > > > > > >> > > > >> > > > > > >> > > > >> > > > > > >> > > > >> > > ----- Original Message ----- > > > >> > > > >> > > > From: "Renchu Mathew" > > > >> > > > <renchu@cracknell.com<mailto:renchu@cracknell.com>> > > > >> > > > >> > > > To: "Martin Perina" > > > >> > > > <mperina@redhat.com<mailto:mperina@redhat.com>> > > > >> > > > >> > > > Cc: users@ovirt.org<mailto:users@ovirt.org> > > > >> > > > >> > > > Sent: Thursday, January 22, 2015 2:39:43 PM > > > >> > > > >> > > > Subject: RE: [ovirt-users] Power Management config on > > > >> > > > Ovirt > > > >> > > > >> > > > > > > >> > > > >> > > > Hi Martin, > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > Yes. The vdsm host.log is from node-02. > > > >> > > > >> > > > > > >> > > > >> > > That's strange, I cannot find any call to fenceNode which > > > >> > > should > > > >> > > > >> > > appear, if PM status is gathered. > > > >> > > > >> > > > > > >> > > > >> > > Eli, any idea? > > > >> > > > >> > > > > > >> > > > >> > > > I have checked the link and it says we need to install > > > >> > > > the sever > > > >> > > > >> > > > view management agent & net-snmp on the hosts. > > > >> > > > >> > > > Do we need to try this? How to install this on node? I > > > >> > > > used the > > > >> > > > >> > > > below irmc admin user. > > > >> > > > >> > > > > > >> > > > >> > > Not, AFAIK this is needed only from Clustersuite, but not > > > >> > > for oVirt. > > > >> > > > >> > > > > > >> > > > >> > > But could you please execute this command on node-20 just > > > >> > > to confirm > > > >> > > > >> > > that Fujitsu Primergy is communicating through IPMI: > > > >> > > > >> > > > > > >> > > > >> > > fence_ipmilan -a IP -l USER -p PASS -o status -v -P > > > >> > > > >> > > > > > >> > > > >> > > where IP is IPMI address (from the log it should be > > > >> > > 192.168.1.114) > > > >> > > > >> > > USER and PASS please set according to you setup. > > > >> > > > >> > > > > > >> > > > >> > > Thanks > > > >> > > > >> > > > > > >> > > > >> > > Martin > > > >> > > > >> > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > [cid:image001.png@01D03669.DD48B4E0]<mailto:[cid:image001 > > > >> > > > .p > > > >> > > > ng > > > >> > > > @0 > > > >> > > > 1 > > > >> > > > D03669.DD48B4E0]> > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > Regards > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > Renchu Mathew | Sr. IT Administrator > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > CRACKNELL DUBAI | P.O. Box 66231 | United Arab Emirates > > > >> > > > | > > > >> > > > T > > > >> > > > +971 > > > >> > > > >> > > > 4 > > > >> > > > >> > > > 3445417 | F +971 4 3493675<tel:%2B971%204%203493675> | > > > >> > > > M > > > >> > > > +971 > > > >> > > > 50 7386484<tel:%2B971%2050%207386484> > > > >> > > > >> > > > > > > >> > > > >> > > > ABU DHABI | DUBAI | LONDON | MUSCAT | DOHA | JEDDAH > > > >> > > > >> > > > > > > >> > > > >> > > > EMAIL renchu@cracknell.com<mailto:renchu@cracknell.com> | > > > >> > > > WEB www.cracknell.com<http://www.cracknell.com> > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > This email, its content and any files transmitted with it > > > >> > > > are > > > >> > > > >> > > > intended solely for the addressee(s) and may be legally > > > >> > > > privileged > > > >> > > > >> > > > and/or confidential. If you are not the intended > > > >> > > > recipient please > > > >> > > > >> > > > let us know by email reply and delete it from the system. > > > >> > > > Please > > > >> > > > >> > > > note that any views or opinions presented in this email > > > >> > > > do not > > > >> > > > >> > > > necessarily represent those of the company. Email > > > >> > > > transmissions > > > >> > > > >> > > > cannot be guaranteed to be secure or error-free as > > > >> > > > information > > > >> > > > >> > > > could be intercepted, corrupted, lost, destroyed, arrive > > > >> > > > late or > > > >> > > > >> > > > incomplete, or contain viruses. The company therefore > > > >> > > > does not > > > >> > > > >> > > > accept liability for any errors or omissions in the > > > >> > > > contents of > > > >> > > > >> > > > this message which arise as a result of email transmission. > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > -----Original Message----- > > > >> > > > >> > > > From: Martin Perina > > > >> > > > [mailto:mperina@redhat.com<mailto:mperina@redhat.com>] > > > >> > > > >> > > > Sent: Thursday, January 22, 2015 4:49 PM > > > >> > > > >> > > > To: Renchu Mathew > > > >> > > > >> > > > Cc: users@ovirt.org<mailto:users@ovirt.org> > > > >> > > > >> > > > Subject: Re: [ovirt-users] Power Management config on > > > >> > > > Ovirt > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > Hi, > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > according to [1] Fujitsu iRMC should be accessible using IPMI. > > > >> > > > >> > > > > > > >> > > > >> > > > Now, I looked at logs, but I cannot see any fenceNode > > > >> > > > exection in > > > >> > > > >> > > > vdsm.log. > > > >> > > > >> > > > According to engine.log, host > > > >> > > > Node-02.cracknell.com<http://Node-02.cracknell.com> was > > > >> > > > used as > > > >> > > > >> > > > fence proxy. > > > >> > > > >> > > > Are you sure that vdsm.log is from this host? > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > Thanks > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > Martin > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > [1] > > > >> > > > >> > > > https://www.redhat.com/archives/linux-cluster/2010-January/msg00056. > > > >> > > > >> > > > ht > > > >> > > > >> > > > ml > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > >> > > > >> > > > ----- Original Message ----- > > > >> > > > >> > > > > > > >> > > > >> > > > > From: "Renchu Mathew" > > > >> > > > > <renchu@cracknell.com<mailto:renchu@cracknell.com>> > > > >> > > > >> > > > > > > >> > > > >> > > > > To: "Martin Perina" > > > >> > > > > <mperina@redhat.com<mailto:mperina@redhat.com>> > > > >> > > > >> > > > > > > >> > > > >> > > > > Cc: users@ovirt.org<mailto:users@ovirt.org> > > > >> > > > >> > > > > > > >> > > > >> > > > > Sent: Thursday, January 22, 2015 12:37:51 PM > > > >> > > > >> > > > > > > >> > > > >> > > > > Subject: RE: [ovirt-users] Power Management config on > > > >> > > > > Ovirt > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > Hi Martin, > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > Please find attached log files from engine and proxy host. > > > >> > > > > Not > > > >> > > > >> > > > > sure > > > >> > > > >> > > > > > > >> > > > >> > > > > whether IPMI or which one can be used. It is Fujitsu > > > >> > > > > iRMC port. > > > >> > > > >> > > > > I also > > > >> > > > >> > > > > > > >> > > > >> > > > > tried the rsb but same error. > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > Can we configure Power management using Fujitsu iRMC? > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > Thanks & Regards > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > Renchu Mathew > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > -----Original Message----- > > > >> > > > >> > > > > > > >> > > > >> > > > > From: Martin Perina > > > >> > > > > [mailto:mperina@redhat.com<mailto:mperina@redhat.com>] > > > >> > > > >> > > > > > > >> > > > >> > > > > Sent: Thursday, January 22, 2015 1:58 PM > > > >> > > > >> > > > > > > >> > > > >> > > > > To: Renchu Mathew > > > >> > > > >> > > > > > > >> > > > >> > > > > Cc: users@ovirt.org<mailto:users@ovirt.org> > > > >> > > > >> > > > > > > >> > > > >> > > > > Subject: Re: [ovirt-users] Power Management config on > > > >> > > > > Ovirt > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > Hi, > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > first of all are you sure that Fujitsu PRIMERGY is > > > >> > > > > accessible > > > >> > > > >> > > > > using > > > >> > > > >> > > > > > > >> > > > >> > > > > IPMI protocol? If so, could you provide engine.log and > > > >> > > > > also > > > >> > > > >> > > > > vdsm.log > > > >> > > > >> > > > > > > >> > > > >> > > > > from host that was used as fencing proxy? You can find > > > >> > > > > out which > > > >> > > > >> > > > > host > > > >> > > > >> > > > > > > >> > > > >> > > > > is used as a proxy either in Events tab after you > > > >> > > > > execute the > > > >> > > > >> > > > > test or in engine.log. > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > Thanks > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > Martin Perina > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > ----- Original Message ----- > > > >> > > > >> > > > > > > >> > > > >> > > > > > From: "Renchu Mathew" > > > >> > > > > > <renchu@cracknell.com<mailto:renchu@cracknell.com>> > > > >> > > > >> > > > > > > >> > > > >> > > > > > To: users@ovirt.org<mailto:users@ovirt.org> > > > >> > > > >> > > > > > > >> > > > >> > > > > > Sent: Thursday, January 22, 2015 7:41:43 AM > > > >> > > > >> > > > > > > >> > > > >> > > > > > Subject: [ovirt-users] Power Management config on > > > >> > > > > > Ovirt > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > Dear all, > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > I am trying to configure power management on ovirt > > > >> > > > > > v3.5 > > > >> > > > >> > > > > > > >> > > > >> > > > > > (ovirt-node-iso-3.5.0.ovirt35.20140912.el6) and using > > > >> > > > > > two > > > >> > > > >> > > > > > Fujitsu > > > >> > > > >> > > > > > > >> > > > >> > > > > > PRIMERGY > > > >> > > > >> > > > > > > >> > > > >> > > > > > RX2540 M1 as node hypervisor. I used Fujitsu iRMC > > > >> > > > > > port on > > > >> > > > >> > > > > > power > > > >> > > > >> > > > > > > >> > > > >> > > > > > management configuration. The test gives a message > > > >> > > > > > “Test > > > >> > > > >> > > > > > failed, > > > >> > > > >> > > > > > > >> > > > >> > > > > > argument of type ‘NoneType’ is not iterable” as below . > > > >> > > > > > Also > > > >> > > > >> > > > > > tried > > > >> > > > >> > > > > > > >> > > > >> > > > > > rsb type as per redhat document. > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > Fence-agents-3.1.5-35.el6_5.4.x86_64 is there on both > > > >> > > > > > nodes. > > > >> > > > >> > > > > > Do we > > > >> > > > >> > > > > > > >> > > > >> > > > > > need to specify anything in Options? > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > Please help me. > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > Best Regards > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > Renchu Mathew > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > _______________________________________________ > > > >> > > > >> > > > > > > >> > > > >> > > > > > Users mailing list > > > >> > > > >> > > > > > > >> > > > >> > > > > > Users@ovirt.org<mailto:Users@ovirt.org<mailto:Users@o > > > >> > > > > > vi rt .o r g%3cmailto:Users@ovirt.org>> > > > >> > > > >> > > > > > > >> > > > >> > > > > > http://lists.ovirt.org/mailman/listinfo/users > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > > > >> > > > >> > > > > > > >> > > > >> > > > > > >> > > > >> > > > > >> > > > >> _______________________________________________ > > > >> Users mailing list > > > >> Users@ovirt.org<mailto:Users@ovirt.org> > > > >> http://lists.ovirt.org/mailman/listinfo/users > > > >> > > > >> > > > > > > _______________________________________________ > > > Users mailing list > > > Users(a)ovirt.org > > > http://lists.ovirt.org/mailman/listinfo/users > > > > > >