Hello Jarek, As of today we cannot have gdeploy to work with different devices on different nodes for deploying HC. Currently device name has to be same on data and arbiter nodes. Hope this helps !! Thanks kasturi On Wed, Dec 20, 2017 at 2:29 PM, Jarek <jaru@jaru.eu.org> wrote:
One thing:
I have two nodes with sda3 partitions for gluster deploy and one node with for example vdd (arbiter). How can I play with gdeploy config to change device name for arbiter node (without udevs)? ------------------------------ *From: *"Jaroslaw Augustynowicz" <jaru@jaru.eu.org> *To: *"Sandro Bonazzola" <sbonazzo@redhat.com> *Cc: *"users" <users@ovirt.org> *Sent: *Friday, December 15, 2017 4:44:50 PM
*Subject: *Re: [ovirt-users] Two node configuration.
Yes, sure :)
Dnia 15 grudnia 2017 16:43:10 CET, Sandro Bonazzola <sbonazzo@redhat.com> napisał(a):
2017-12-15 16:37 GMT+01:00 Jarosław Augustynowicz <jaru@jaru.eu.org>:
It can be good idea: 2 physical nodes with local disks (raid6) as gluster bricks + 2 kvm vms with pcs and drbd for arbiter.
Just be sure to not run the kvm vms arbiters on the same real hosts or it may become a mess.
I'll test it.
Dnia 15 grudnia 2017 13:05:08 CET, Sandro Bonazzola <sbonazzo@redhat.com> napisał(a):
2017-12-15 12:53 GMT+01:00 Jarek <jaru@jaru.eu.org>:
Yes, I checked it but it seems I still need three nodes - 2 for storage and one smaller for arbiter. Is it safe to deploy it only on two nodes?
the host arbiter can be even just a Raspberry PI as far as I can tell. Adding Sahina.
Am I wrong?
------------------------------ *From: *"Sandro Bonazzola" <sbonazzo@redhat.com> *To: *"Jaroslaw Augustynowicz" <jaru@jaru.eu.org> *Cc: *"users" <users@ovirt.org> *Sent: *Friday, December 15, 2017 12:03:24 PM *Subject: *Re: [ovirt-users] Two node configuration.
2017-12-15 8:55 GMT+01:00 Jarek <jaru@jaru.eu.org>:
Hello, currently I'm using kvms with pcs&drbd on vms... is there any ovirt solution for ha with two nodes (storage on local disks) without pcs& drbd for storage? I know about gluster storage but it needs third host;/
Did you check https://access.redhat.com/documentation/en-us/red_ hat_gluster_storage/3.3/html/administration_guide/creating_ arbitrated_replicated_volumes ?
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
--
SANDRO BONAZZOLA
ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D
Red Hat EMEA <https://www.redhat.com/> <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
--
SANDRO BONAZZOLA
ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D
Red Hat EMEA <https://www.redhat.com/> <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
--
SANDRO BONAZZOLA
ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D
Red Hat EMEA <https://www.redhat.com/> <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users