3:04 p.m.
Dear all,
thank you for the great support. I think that the iso installer was
corrupted. I uploaded the iso again, and now it is working fine!
> Couple things...
>
> 1.). You created a drive correct? Just wanted to make sure you did
> add a drive.
>
> 2.) Once you get to that window in the windows setup to choose your
> install drive you need to go to your oVirt console and select "Change
> Disk" and change it to the virtio iso that contains drivers.
>
> Once you do this you need to "browse" and find the correct driver. The
> drive won't show until you load the correct driver. After you do this
> the drive shows. Select the drive and go back into the oVirt console
> and hit "Change Disk" and choose the windows iso again and continue
>
> https://youtu.be/Pasz-lv3gTY
> Check out about 26:00 minutes.
>
> On Sun, Nov 18, 2018, 11:35 AM <bardos.matyas(a)techcentral.hu wrote:
>
>> Dear Vincent,
>>
>> Thank you for the quick support. Yes, i have connected the driver
>> cd,
>> installed the drivers, but the disk is still not visible for
>> windows.
>> Really strange is, that it doesn't matter, if I use scsi, or IDE
>> (which
>> should work natively), nothing is visible in windows... :(
>> So i have no clue what is the problem. I have many virtual windows
>> guests in my other virtual platform (kvm) and there is everything
>> working fine.
>>
>>> you have to mount the CD drive with the virtuio drivers during the
>>> setup process.
>>>
>>> get to the screen to select disks. do a "change cd" and mount the
>>> virtio ISO. then you have to go "have disk" in setup and add the
>>> drivers. Once the drivers are installed, you have to refresh the
>> list
>>> before it will show the disks. once the disk is showing up then
>> you do
>>> a change CD again back to the installation .iso.
>>>
>>> On Sat, Nov 17, 2018 at 3:28 PM <bardos.matyas(a)techcentral.hu>
>> wrote:
>>>
>>>> Dear list,
>>>>
>>>> I am new in ovirt, and I have a problem, which I can’t solve
>> with
>>>> google. I am not able to install windows guests, because they
>>>> can’t find they disk. I have already many linux guests running,
>> so
>>>> generally everything is working fine. I try with virtio-scsi
>> disks.
>>>> What I already tried:
>>>> - While the installation process I changed the disk to the virtio
>>>> driver disk (downloaded from fedora project), I try to load scsi
>>>> drivers, and windows still can’t find the disk
>>>> - I tried with virtio floppy (run once) but the floppy is not
>>>> visible in windows select menu
>>>> - I added the drivers to windows installer wim, but disks still
>> not
>>>> visible
>>>> - I tried to add ide drive, but it is not visible either (I have
>>>> disabled virtio scsi under resource allocation too, without luck)
>>>> - tried windows 7 and 2016
>>>>
>>>> My nodes are: oVirt Node 4.2.1.1
>>>> I use local disks but via nfs, so i share the local disk via nfs.
>>>>
>>>> Do you have any idea what could I try. Any clue are welcome,
>> because
>>>> I’m stuck…
>>>>
>>>> Thank you in advance!
>>>>
>>>> Regards!
>>>> _______________________________________________
>>>> Users mailing list -- users(a)ovirt.org
>>>> To unsubscribe send an email to users-leave(a)ovirt.org
>>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>>>> oVirt Code of Conduct:
>>>> https://www.ovirt.org/community/about/community-guidelines/
>>>> List Archives:
>>>>
>>>
>>
>
https://lists.ovirt.org/archives/list/users@ovirt.org/message/727QXGFHKFA...
>> _______________________________________________
>> Users mailing list -- users(a)ovirt.org
>> To unsubscribe send an email to users-leave(a)ovirt.org
>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
>> oVirt Code of Conduct:
>> https://www.ovirt.org/community/about/community-guidelines/
>> List Archives:
>>
>
https://lists.ovirt.org/archives/list/users@ovirt.org/message/6KQUX6TLEVN...