11:41 p.m.
I've seen this.
Ensure that all qemu-related packages are coming from centos-advanced-virtualization repo
(6.0.0-33.el8s.x86_64).
There is a known issue with the latest packages in the CentOS Stream.
Also, you can set the following alias on the Hypervisours:
alias virsh='virsh -c
qemu:///system?authfile=/etc/ovirt-hosted-engine/virsh_auth.conf'
Best Regards,
Strahil Nikolov
В неделя, 23 януари 2022 г., 21:14:20 Гринуич+2, Robert Tongue
<phunyguy(a)neverserio.us> написа:
#yiv4464233184 P {margin-top:0;margin-bottom:0;}Greetings oVirt people,
I am having a problem with the hosted-engine deployment, and unfortunately after a weekend
spent trying to get this far, I am finally stuck, and cannot figure out how to fix this.
I am starting with 1 host, and will have 4 when this is finished. Storage is GlusterFS,
hyperconverged, but I am managing that myself outside of oVirt. It's a single-node
GlusterFS volume, which I will expand out across the other 4 nodes as well. I get all the
way through the initial hosted-engine deployment (via the cockpit interface) pre-storage,
then get most of the way through the storage portion of it. It fails at starting the
HostedEngine VM in its final state after copying the VM disk to shared storage.
This is where it gets weird.
[ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg":
"Engine VM IP address is while the engine's he_fqdn ovirt.deleted.domain resolves
to 192.168.x.x. If you are using DHCP, check your DHCP reservation configuration"}
I've masked out the domain and IP for obvious reasons. However I think this
deployment error isn't really the reason for the failure, it's just where it is at
when it fails. The HostedEngine VM is starting, but not actually booting. I was able to
change the VNC password with `hosted-engine --add-console-password`, and see the local
console display with that, however it just displays "The guest has not initialized
the display (yet)".
I also did:
# hosted-engine --consoleThe engine VM is running on this hostEscape character is ^]
Yet that doesn't move any further, nor allow any input. The VM does not respond on
the network. I am thinking it's just not making it to the initial BIOS screen and
booting at all. What would cause that?
Here is the glusterfs volume for clarity.
# gluster volume info storage Volume Name: storageType: DistributeVolume ID:
e9544310-8890-43e3-b49c-6e8c7472dbbbStatus: StartedSnapshot Count: 0Number of Bricks:
1Transport-type: tcpBricks:Brick1: node1:/var/glusterfs/storage/1Options
Reconfigured:storage.owner-gid: 36storage.owner-uid: 36network.ping-timeout:
5performance.client-io-threads: onserver.event-threads: 4client.event-threads:
4cluster.choose-local: offuser.cifs: offfeatures.shard: oncluster.shd-wait-qlength:
1024cluster.locking-scheme: fullcluster.data-self-heal-algorithm:
fullcluster.server-quorum-type: servercluster.quorum-type: autocluster.eager-lock:
enableperformance.strict-o-direct: onnetwork.remote-dio:
disableperformance.low-prio-threads: 32performance.io-cache: offperformance.read-ahead:
offperformance.quick-read: offstorage.fips-mode-rchecksum: ontransport.address-family:
inetnfs.disable: on
# cat /proc/cpuinfoprocessor : 0vendor_id : GenuineIntelcpu family : 6model : 58model name
: Intel(R) Xeon(R) CPU E3-1280 V2 @ 3.60GHzstepping : 9microcode : 0x21cpu MHz :
4000.000cache size : 8192 KBphysical id : 0siblings : 8core id : 0cpu cores : 4apicid :
0initial apicid : 0fpu : yesfpu_exception : yescpuid level : 13wp : yesflags : fpu vme de
pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse
sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl
xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2
ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx f16c
rdrand lahf_lm cpuid_fault epb pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept
vpid fsgsbase smep erms xsaveopt dtherm ida arat pln pts md_clear flush_l1dbugs :
cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf mds swapgs itlb_multihit
srbdsbogomips : 7199.86clflush size : 64cache_alignment: 64address sizes : 36 bits
physical, 48 bits virtualpower management:
[ plus 7 more ]
Thanks for any insight that can be provided.
_______________________________________________
Users mailing list -- users(a)ovirt.org
To unsubscribe send an email to users-leave(a)ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/JZQYGXQP5DO...