Re: [ovirt-users] Performance of cloning

On Thu, Sep 28, 2017 at 11:02 AM, Gianluca Cecchi <gianluca.cecchi(a)gmail.com The cloning process elapsed was 101' The 3 disks are 85Gb, 20Gb and 80Gb so at the end an average of 30MB/s At this moment I have only one host with self hosted engine VM running in this environment, planning to add another host in short time. So not yet configured power mgmt for fencing on it During the cloning I saw these kind of events Sep 28, 2017 10:31:30 AM VM vmclone1 creation was initiated by admin@internal-authz. Sep 28, 2017 11:16:38 AM VDSM command SetVolumeDescriptionVDS failed: Message timeout which can be caused by communication issues Sep 28, 2017 11:19:43 AM VDSM command SetVolumeDescriptionVDS failed: Message timeout which can be caused by communication issues Sep 28, 2017 11:19:43 AM Failed to update OVF disks 1504a878-4fe2-40df-a88f-6f073be0bd7b, 4ddac3ed-2bb9-485c-bf57-1750ac1fd761, OVF data isn't updated on those OVF stores (Data Center DC1, Storage Domain SDTEST). At 11:24 I then start a pre-existing VM named benchvm and run a cpu / I/O benchmark (HammerDB with 13 concurrent users; the VM is configured with 12 vcpus (1:6:2) and 64Gb of ram; it is not the one I'm cloning) that runs from 11:40 to 12:02 Sep 28, 2017 11:24:29 AM VM benchvm started on Host host1 Sep 28, 2017 11:45:18 AM Host host1 is not responding. Host cannot be fenced automatically because power management for the host is disabled. Sep 28, 2017 11:45:28 AM Failed to update OVF disks 1504a878-4fe2-40df-a88f-6f073be0bd7b, 4ddac3ed-2bb9-485c-bf57-1750ac1fd761, OVF data isn't updated on those OVF stores (Data Center DC1, Storage Domain SDTEST). Sep 28, 2017 11:45:39 AM Status of host host1 was set to Up. Sep 28, 2017 12:12:31 PM VM vmclone1 creation has been completed. Any hint on the failures detected, both when only the cloning process was in place and when a bench was running inside a VM? Thanks, Gianluca