Hi, sorry for the delay, I reinstalled everything, configured the networks, attached the iSCSI storage with 2 interfaces and finally created the iSCSI-bond:
[root@ovh01 ~]# route Kernel IP Routentabelle Ziel Router Genmask Flags Metric Ref Use Iface default hp5406-1-srv.mo 0.0.0.0 UG 0 0 0 ovirtmgmt 10.0.24.0 0.0.0.0 255.255.255.0 U 0 0 0 ovirtmgmt 10.0.131.0 0.0.0.0 255.255.255.0 U 0 0 0 enp9s0f0 10.0.132.0 0.0.0.0 255.255.255.0 U 0 0 0 enp9s0f1 link-local 0.0.0.0 255.255.0.0 U 1005 0 0 enp9s0f0 link-local 0.0.0.0 255.255.0.0 U 1006 0 0 enp9s0f1 link-local 0.0.0.0 255.255.0.0 U 1008 0 0 ovirtmgmt link-local 0.0.0.0 255.255.0.0 U 1015 0 0 bond0 link-local 0.0.0.0 255.255.0.0 U 1017 0 0 ADMIN link-local 0.0.0.0 255.255.0.0 U 1021 0 0 SRV
and:
[root@ovh01 ~]# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: enp13s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master ovirtmgmt state UP qlen 1000 link/ether e0:3f:49:6d:68:c4 brd ff:ff:ff:ff:ff:ff 3: enp8s0f0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP qlen 1000 link/ether 90:e2:ba:11:21:d0 brd ff:ff:ff:ff:ff:ff 4: enp8s0f1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP qlen 1000 link/ether 90:e2:ba:11:21:d0 brd ff:ff:ff:ff:ff:ff 5: enp9s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/ether 90:e2:ba:11:21:d4 brd ff:ff:ff:ff:ff:ff inet 10.0.131.181/24 brd 10.0.131.255 scope global enp9s0f0 valid_lft forever preferred_lft forever 6: enp9s0f1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/ether 90:e2:ba:11:21:d5 brd ff:ff:ff:ff:ff:ff inet 10.0.132.181/24 brd 10.0.132.255 scope global enp9s0f1 valid_lft forever preferred_lft forever 7: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 26:b2:4e:5e:f0:60 brd ff:ff:ff:ff:ff:ff 8: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether e0:3f:49:6d:68:c4 brd ff:ff:ff:ff:ff:ff inet 10.0.24.181/24 brd 10.0.24.255 scope global ovirtmgmt valid_lft forever preferred_lft forever 14: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master ovirtmgmt state UNKNOWN qlen 500 link/ether fe:16:3e:79:25:86 brd ff:ff:ff:ff:ff:ff inet6 fe80::fc16:3eff:fe79:2586/64 scope link valid_lft forever preferred_lft forever 15: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 90:e2:ba:11:21:d0 brd ff:ff:ff:ff:ff:ff 16: bond0.32@bond0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master ADMIN state UP link/ether 90:e2:ba:11:21:d0 brd ff:ff:ff:ff:ff:ff 17: ADMIN: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 90:e2:ba:11:21:d0 brd ff:ff:ff:ff:ff:ff 20: bond0.24@bond0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master SRV state UP link/ether 90:e2:ba:11:21:d0 brd ff:ff:ff:ff:ff:ff 21: SRV: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 90:e2:ba:11:21:d0 brd ff:ff:ff:ff:ff:ff
The host keeps toggling all storage domains on and off as soon as there is an iSCSI bond configured. Thank you for your patience. cu, Uwe Am 18.08.2016 um 11:10 schrieb Elad Ben Aharon:
I don't think it's necessary. Please provide the host's routing table and interfaces list ('ip a' or ifconfing) while it's configured with the bond.
Thanks
On Tue, Aug 16, 2016 at 4:39 PM, Uwe Laverenz <uwe@laverenz.de <mailto:uwe@laverenz.de>> wrote:
Hi Elad,
Am 16.08.2016 um 10:52 schrieb Elad Ben Aharon:
Please be sure that ovirtmgmt is not part of the iSCSI bond.
Yes, I made sure it is not part of the bond.
It does seem to have a conflict between default and enp9s0f0/ enp9s0f1. Try to put the host in maintenance and then delete the iscsi nodes using 'iscsiadm -m node -o delete'. Then activate the host.
I tried that, I managed to get the iSCSI interface clean, no "default" anymore. But that didn't solve the problem of the host becoming "inactive". Not even the NFS domains would come up.
As soon as I remove the iSCSI-bond, the host becomes responsive again and I can activate all storage domains. Removing the bond also brings the duplicated "Iface Name" back (but this time causes no problems).
...
I wonder if there is a basic misunderstanding on my side: wouldn't it be necessary that all targets are reachable from all interfaces that are configured into the bond to make it work?
But this would either mean two interfaces in the same network or routing between the iSCSI networks.
Thanks,
Uwe _______________________________________________ Users mailing list Users@ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>