Re: [ovirt-users] Power management - oVirt 4,2

Dear Martin, Please see the following result. [root@XXXXX ~]# fence_ilo4 -a XXX.XXX.XXX.XXX -l XXXXX -p XXXXX -v -o status Executing: /usr/bin/ipmitool -I lanplus -H XXX.XXX.XXX.XXX -p 623 -U XXXXX -P XXXXX -L ADMINISTRATOR chassis power status Connection timed out [root@XXXXX~]# As you can see it just said connection timed out. But i can actually access iLO5 ( same account and password) through Internet Explorer ,

I want to ask.. do you know what port did the manger use when compile this command?

Regards Terry 2018-02-26 17:38 GMT+08:00 Martin Perina <mperina(a)redhat.com&gt;: > > > On Fri, Feb 23, 2018 at 11:34 AM, Terry hey <recreationh(a)gmail.com&gt; > wrote: > >> Dear Martin, >> I am very sorry that i reply you so late. >> Do you mean that 4.2 can support ilo5 by selecting the option "ilo4" in >> power management? >> > > ​Yes > ​ > > >> "from the error message below I'd say that you are either not using >> correct IP address of iLO5 interface or you haven't enabled remote access >> to your iLO5 interface" >> I just try it and double confirm that i did not type a wrong IP. But the >> error message is same. >> > > ​Unfortunately I don't have iLO5 server available, so I cannot provide > more details. Anyway could you please double check your server > documentation, that you have enabled access to iLO5 IPMI interface > correctly? And could you please share output of following command? > > ​ > f > ​​ > ence_ilo4 -a <IP_ADDRESS> -l <USERNAME> -p <PASSWORD> -v -o status > > Thanks > > Martin > ​ > > >> >> Regards >> Terry >> >> 2018-02-08 16:13 GMT+08:00 Martin Perina <mperina(a)redhat.com&gt;: >> >>> Hi Terry, >>> >>> from the error message below I'd say that you are either not using >>> correct IP address of iLO5 interface or you haven't enabled remote access >>> to your iLO5 interface. >>> According to [1] iLO5 should fully IPMI compatible. So are you sure >>> that you enabled the remote access to your iLO5 address in iLO5 management? >>> Please consult [1] how to enable everything and use a user with at >>> least Operator privileges. >>> >>> Regards >>> >>> Martin >>> >>> [1] https://support.hpe.com/hpsc/doc/public/display?docId=a00018 >>> 324en_us >>> >>> >>> On Thu, Feb 8, 2018 at 7:57 AM, Terry hey <recreationh(a)gmail.com&gt; >>> wrote: >>> >>>> Dear Martin, >>>> >>>> Thank you for helping me. To answer your question, >>>> 1. Does the Test in Edit fence agent dialog work​? >>>> Ans: it shows that "Test failed: Internal JSON-RPC error" >>>> >>>> Regardless the fail result, i press "OK" to enable power management. >>>> There are four event log appear in "Events" >>>> ********************************The follwing are the log in >>>> "Event""******************************** >>>> Host host01 configuration was updated by admin@internal-authz. >>>> Kdump integration is enabled for host hostv01, but kdump is not >>>> configured properly on host. >>>> Health check on Host host01 indicates that future attempts to Stop >>>> this host using Power-Management are expected to fail. >>>> Health check on Host host01 indicates that future attempts to Start >>>> this host using Power-Management are expected to fail. >>>> >>>> 2. If not could you please try to install fence-agents-all package on >>>> different host and execute? >>>> Ans: It just shows "Connection timed out". >>>> >>>> So, does it means that it is not support iLo5 now or i configure >>>> wrongly? >>>> >>>> Regards, >>>> Terry >>>> >>>> 2018-02-02 15:46 GMT+08:00 Martin Perina <mperina(a)redhat.com&gt;: >>>> >>>>> >>>>> >>>>> On Fri, Feb 2, 2018 at 5:40 AM, Terry hey <recreationh(a)gmail.com&gt; >>>>> wrote: >>>>> >>>>>> Dear Martin, >>>>>> >>>>>> Um..Since i am going to use HPE ProLiant DL360 Gen10 Server to setup >>>>>> oVirt Node(Hypervisor). HP G10 is using ilo5 rather than ilo4. Therefore, i >>>>>> would like to ask whether oVirt power management support iLO5 or not. >>>>>> >>>>> >>>>> ​We don't have any hardware with iLO5 available, but there is a good >>>>> chance that it will be compatible with iLO4. Have you tried to setup your >>>>> server with iLO4? Does the Test in Edit fence agent dialog work​? If not >>>>> could you please try to install fence-agents-all package on different host >>>>> and execute following: >>>>> >>>>> ​​ >>>>> f >>>>> ​​ >>>>> ence_ilo4 -a <IP_ADDRESS> -l <USERNAME> -p <PASSWORD> -v -o status >>>>> >>>>> and share the output? >>>>> >>>>> Thanks >>>>> >>>>> Martin >>>>> >>>>> >>>>>> If not, do you have any idea to setup power management with HP G10? >>>>>> >>>>>> Regards, >>>>>> Terry >>>>>> >>>>>> 2018-02-01 16:21 GMT+08:00 Martin Perina <mperina(a)redhat.com&gt;: >>>>>> >>>>>>> >>>>>>> >>>>>>> On Wed, Jan 31, 2018 at 11:19 PM, Luca 'remix_tj' Lorenzetto < >>>>>>> lorenzetto.luca(a)gmail.com&gt; wrote: >>>>>>> >>>>>>>> Hi, >>>>>>>> >>>>>>>> From ilo3 and up, ilo fencing agents are an alias for fence_ipmi. >>>>>>>> Try using the standard ipmi. >>>>>>>> >>>>>>> >>>>>>> ​It's not just an alias, ilo3/ilo4 also have different defaults >>>>>>> than ipmilan. For example if you use ilo4, then by default following is >>>>>>> used: >>>>>>> >>>>>>> ​ >>>>>>> >>>>>>> ​lanplus=1 >>>>>>> power_wait=4 >>>>>>> >>>>>>> ​So I recommend to start with ilo4 and add any necessary custom >>>>>>> options into Options field. If you need some custom >>>>>>> options, could you please share them with us? It would be very >>>>>>> helpful for us, if needed we could introduce ilo5 with >>>>>>> different defaults then ilo4 >>>>>>> >>>>>>> Thanks >>>>>>> >>>>>>> Martin >>>>>>> >>>>>>> >>>>>>>> Luca >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> Il 31 gen 2018 11:14 PM, "Terry hey" <recreationh(a)gmail.com&gt; ha >>>>>>>> scritto: >>>>>>>> >>>>>>>>> Dear all, >>>>>>>>> Did oVirt 4.2 Power management support iLO5 as i could not see >>>>>>>>> iLO5 option in Power Management. >>>>>>>>> >>>>>>>>> Regards >>>>>>>>> Terry >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> Users mailing list >>>>>>>>> Users(a)ovirt.org >>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>>>>> >>>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> Users mailing list >>>>>>>> Users(a)ovirt.org >>>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> Martin Perina >>>>>>> Associate Manager, Software Engineering >>>>>>> Red Hat Czech s.r.o. >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>> -- >>>>> Martin Perina >>>>> Associate Manager, Software Engineering >>>>> Red Hat Czech s.r.o. >>>>> >>>> >>>> >>> >>> >>> -- >>> Martin Perina >>> Associate Manager, Software Engineering >>> Red Hat Czech s.r.o. >>> >> >> > > > -- > Martin Perina > Associate Manager, Software Engineering > Red Hat Czech s.r.o. >