Man, Mode 4 is LACP. You must use the correct technology or things will get messy. I run a lot of RHV and oVirt clusters with Mode 4, 802.3ad, LACP or any other name you want to use. But you must comply with the rules. I do recommend some reading about bonding modes, don’t just enable them and see what happens, this is not responsible at all. https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Virtualizat... And man, open a new thread, this one was from a VLAN issue on the storage network.
On 5 Feb 2020, at 19:53, eevans@digitaldatatechs.com wrote:
So if the bond is set to mode 4 I should LAG the ports it connects to? It doesn't affect an identical server not in the ovirt cluster and shows 2 Gb connection. I have tried mode 1 and 2 with the same result. Also, the other ovirt node is in mode 4 and no issues at all.
Eric Evans Digital Data Services LLC. 304.660.9080
-----Original Message----- From: Vinícius Ferrão <ferrao@versatushpc.com.br> Sent: Wednesday, February 05, 2020 4:51 PM To: eevans@digitaldatatechs.com Cc: users@ovirt.org Subject: [ovirt-users] Re: Deploy Hosted Engine fails at "Set VLAN ID at datacenter level"
Mode 4 is LACP.
So the switches must be talking LACP.
On 5 Feb 2020, at 18:28, eevans@digitaldatatechs.com wrote:
I tried to set lags but it killed communication altogether. So no they are not.
Eric Evans Digital Data Services LLC. 304.660.9080
-----Original Message----- From: Vinícius Ferrão <ferrao@versatushpc.com.br> Sent: Wednesday, February 05, 2020 3:55 PM To: eevans@digitaldatatechs.com Cc: users@ovirt.org Subject: [ovirt-users] Re: Deploy Hosted Engine fails at "Set VLAN ID at datacenter level"
The switches are configured for LACP Active mode?
On 5 Feb 2020, at 17:40, eevans@digitaldatatechs.com wrote:
I have a hypervisor with nic bonding in place and it has some communication issues. It constantly goes up and down and into non operational mode but comes back up. Is there a fix for this? Using Mode 4 for bonding.
Eric Evans Digital Data Services LLC. 304.660.9080
-----Original Message----- From: clam2718@gmail.com <clam2718@gmail.com> Sent: Wednesday, February 05, 2020 12:48 PM To: users@ovirt.org Subject: [ovirt-users] Re: Deploy Hosted Engine fails at "Set VLAN ID at datacenter level"
Thank you Guillaume! My mistake. Resolved.
I am now having further issues I believe to be because I am using tagged VLANs with NIC teaming. It appears that teaming is not well supported in oVirt - is that accurate, and that I should rebuild using bonds. If you have any experience to shed light on this it is much appreciated.
[ INFO ] TASK [ovirt.hosted_engine_setup : Fail with error description] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The host has been set in non_operational status, deployment errors: code 505: Host fmov1n1.bcn.dtcorp.com installation failed. Failed to configure management network on the host., code 9000: Failed to verify Power Management configuration for Host fmov1n1.bcn.dtcorp.com., fix accordingly and re-deploy."}
Thanks so very much, Charles _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/LPUANZA L Z7L5ZC26XE65AKFJCPUINU2N/ _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/NB3OJYA H UG3YWTV3KHPGEYFVUM3ZZHIA/
Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/MRNRY7MD EFUF4T72UQTPB4YNGAXKO4IJ/
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/D6JR7VG4XAMY3G...