[ovirt-users] Scale out ovirt 4.3 (from 3 to 6 or 9 nodes) with hyperconverged setup and Gluster

Hello, I have a 3 node Hyperconverged setup with gluster and added 3 new nodes to the cluster for a total of 6 servers. I am now taking advantage of more compute power but cant scale out my storage volumes. Current Hyperconverged setup: - host1.mydomain.com ---> Bricks: engine data1 vmstore1 - host2.mydomain.com ---> Bricks: engine data1 vmstore1 - host3.mydomain.com ---> Bricks: engine data1 vmstore1 From these 3 servers we get the following Volumes: - engine(host1:engine, host2:engine, host3:engine) - data1 (host1:data1, host2:data1, host3:data1) - vmstore1 (host1:vmstore1, host2:vmstore1, host3:vmstore11) The following are the newly added servers to the cluster, however as you can see there are no gluster bricks - host4.mydomain.com - host5.mydomain.com - host6.mydomain.com I know that the bricks must be added in sets of 3 and per the first 3 hosts that is how it was deployed thru the web UI. Questions: -how can i extend the gluster volumes engine, data1 and vmstore using host4, host5 and host6? -Do I need to configure gluster volumes manually through the OS CLI in order for them to span amongst all 6 servers? -If I configure the fail storage scenario manually will oVirt know about it?, will it still be hyperconverged? I have only seen 3 host hyperconverged setup examples with gluster, but have not found examples for 6, 9 or 12 host cluster with gluster. I know it might be a lack of understanding from my end on how ovirt and gluster integrate with one another. If you can point me in the right direction would be great. thanks,