
--_000_7AFA66599AC41847AD8E021A1DBB9D1426FAB33C19pandoreankama_ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi, I have the exact same problems with the latest 2.5.5-0.1. 1. I'm unable to install from USB stick because after installation, t= he system does not find it's root volume. 2. Using a CDROM, the installation hangs. First time it hanged at 75%= . Second time I tried, it hanged at 25%. No message at all, but keyboard is= responsive (lock num, console switch). I could try to do some debug for you. Having the root account used during t= he installation would help. What is it? With the CDROM installation, I've tried with 2 different hard drives and th= e server was running fine with its previous OS, so no hardware issue here. I was running the installation on a Poweredge 1950 server. Vince De : users-bounces@ovirt.org [mailto:users-bounces@ovirt.org] De la part de= Alexandre Santos Envoy=E9 : jeudi 11 octobre 2012 22:57 =C0 : Mike Burns Cc : users@ovirt.org Objet : Re: [Users] ovirt-node install hangs 2012/10/11 Alexandre Santos <santosam72@gmail.com<mailto:santosam72@gmail.c= om>> 2012/10/11 Mike Burns <mburns@redhat.com<mailto:mburns@redhat.com>> On Thu, 2012-10-11 at 11:12 +0100, Alexandre Santos wrote:
Hi, yesterday I tried the new oVirt Node 2.5.3. I tried installing it without the quiet flag but no luck. It hanged again and the kernel didn't show any error on console (tty2). Later will test without the rhgh flag. Default options? TUI install? Hardware? UEFI or legacy bios?
I always choose the troubleshooting option and then do an install with basi= c video. The only thing I changed from the default kernel boot line was the= quiet flag. Yes, TUI. Hardware: this is an old MSI P35Neo MB with 4 GB RAM and a Xeon 3040. The S= ATA disk is connected to the onboard controller. The same problem occurred = with an IDE HDD. Without rhgb and quiet no luck at all. Tomorrow will try with a SATA PCI Ca= rd with a Sil chip.
Alex
BTW, now the hostname works on 2.5.3 :-) The network configuration is still tricky... sometimes I have an "Apply" sometimes only a "Back" choice.
I *think* this is a feature of being registered to ovirt-engine. Once you are registered, you can't change the network through the TUI anymore. If you're not registered with Engine, please elaborate a bit and I'll try to figure out what is going on. What you're saying makes sense. The problem I had was that my node was boot= ing with DHCP and the IP changed. When I got to the engine / web administra= tor, my Host was not detected and I couldn't change it's IP, only the hostn= ame... On the TUI I can't change the IP because I'm registered but can't ch= ange it also on the engine. Is this correct? Mike
2012/10/9 Alexandre Santos <santosam72@gmail.com<mailto:santosam72@gmail.=
com>>
It's working now :-)
Thanks a lot all!
Alex
P.S. I haven't tried installing it on my SATA disk because I have there a Local Node already running but I'm going to try again on another one to see if I can send to you the error log.
2012/10/8 Mike Burns <mburns@redhat.com<mailto:mburns@redhat.com>> On Mon, 2012-10-08 at 09:54 +0100, Alexandre Santos wrote: > > > 2012/10/8 Fabian Deutsch <fabiand@redhat.com<mailto:fab=
iand@redhat.com>>
> Am Montag, den 08.10.2012, 09:24 +0100 schrieb Alexandre > Santos: > > 2012/10/8 Fabian Deutsch <fabiand@redhat.com<mailto:fabiand@redhat.com>> > > Hey, > > > > Am Sonntag, den 07.10.2012, 15:29 +0100 schrieb > Alexandre > > Santos: > > > Hi, > > > I'm trying to install the ovirt-node iso image on > a SATA > > disk and when > > > it gets to the screen where it shows 25% completed > the > > kernel hangs. I > > > can't connect using a serial console to see what > has > > happened. If I > > > reboot using a usb linux disk I see that the SATA > disk has > > been > > > formated and the partitions that existed before > disappeared, > > being > > > there just one partition of type "ee" > > > > > > Is there any error displayed when kernel hangs at > 25%? And it > > can take > > some time to pass the 25% (up to ~2min or so). > > > > No, I think it's a kernel hang because the lights on the > keyboard halt > > and I can't change to tty2, etc.. I even changed to tty2 and > waited to > > see if there were some errors but nothing. I've read that > "tty8" was > > the logging console but no luck also. > > BTW, I tried with an IDE disk and the result was the same. > > > Mh, okay. > Could you try booting without the rhgb and quiet kernel > arguments. I > hope that some errors will be displayed on the screen so we > get an idea > about the problem. > > > > > > If I use a 8 GB usb pen-drive instead of the SATA > disk, the > > > installation comes to an end and I reboot but then > I get > > some error > > > about not getting /dev/mapper/by-name/Root and the > boot > > fails to a > > > dracut shell. > > > Any ideas? > > > > > > In the dracut shell, could you run blkid and post > the results? > > > > I noticed that the USB Disk was named RootBackup instead of > Root... I > > then rebooted and chose uninstall and then installed oVirt > Node from > > scratch and now it worked.
Glad it worked the second time. There should be 4 partitions on the disk.
Partition 1 is for UEFI or bios_boot depending on your machine type. Partition 2 and Partition 3 are Root and RootBackup. So seeing a RootBackup is correct. Not seeing a Root is incorrect. If you rebooted the host in the middle of the install, or if the install hung for some reason, I can see that situation happening and see it working after uninstall/install.
> > I can't activate Networking because I have that "no > hostname" error > > mentioned in another post. I think it's related to that...
You can't activate networking at all? That is news to me. The node should work perfectly fine with or without a FQDN.
> > > Yes, I've also seen the hostname error. And I've also seen > some problems > with the rootfs lately.
Have you seen these issues with the 2.5.2 build? Or only master branch builds?
> Could you provide a screenshot/dump of the console with that > error? > > - fabian > > > Ok! I'll send them as soon as possible. > > Alex > >
> _______________________________________________ > Users mailing list > Users@ovirt.org<mailto:Users@ovirt.org> > http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org<mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users
</o:p></span></p><p class=3DMsoNormal><span lang=3DEN-US style=3D'font-siz= e:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><o:p> </o:p= </span></p><p class=3DMsoNormal><b><span style=3D'font-size:10.0pt;font-fa= mily:"Tahoma","sans-serif"'>De :</span></b><span style=3D'font-size:10= .0pt;font-family:"Tahoma","sans-serif"'> users-bounces@ovirt.org [mailto:us= ers-bounces@ovirt.org] <b>De la part de</b> Alexandre Santos<br><b>Envoy=E9= :</b> jeudi 11 octobre 2012 22:57<br><b>=C0 :</b> Mike Burns<br>= <b>Cc :</b> users@ovirt.org<br><b>Objet :</b> Re: [Users] ovirt-n= ode install hangs<o:p></o:p></span></p><p class=3DMsoNormal><o:p> </o:=
> ><br>> = > 2012/10/8 Fabi= an Deutsch <<a href=3D"mailto:fabiand@redhat.com" target=3D"_blank">fabi= and@redhat.com</a>><br>> &n= bsp; > Am Montag, den 08.10.2012, 09:= 24 +0100<br>> sc=
> > &= nbsp; > > Hi,<br>>  = ; >  = ; > > I'm trying to install the<br= > ovirt-node is= o image on<br>> = > a SATA<br>> = > > &= nbsp; disk and when<br>>  = ; > > = > it gets to the screen where it<br>> &nb= sp; shows 25% completed<br>> &= nbsp; > &= nbsp; the<br>> &= gt; > kernel han= gs. I<br>> > = > > can't con= nect using a serial<br>>  = ; console to see what<br>> &nb= sp; > has<br>>  = ; >  = ; > happened. If I<br>> &nb= sp; > >= ; > reboot using a usb linux disk I<br>> = see that the SATA<b= r>> > = disk has<br>> &n= bsp; > > &nbs=
> kernel hangs = at<br>> > &nb= sp; 25%? And it<br>> &n= bsp; > > &nbs=
> ><br>> = > Alex<br>> &= nbsp; ><br>> = ><br>><br>>  = ; > ___________________= ____________________________<br>> &nb= sp; > Users mailing list<br>> &nbs=
-- This message has been scanned for viruses and dangerous content by MailScanner<http://www.mailscanner.info/>, and is believed to be clean. --=20 This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. --_000_7AFA66599AC41847AD8E021A1DBB9D1426FAB33C19pandoreankama_ Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"><head><meta http-equiv=3DContent-Type content= =3D"text/html; charset=3Diso-8859-1"><meta name=3DGenerator content=3D"Micr= osoft Word 14 (filtered medium)"><style><!-- /* Font Definitions */ @font-face {font-family:Calibri; panose-1:2 15 5 2 2 2 4 3 2 4;} @font-face {font-family:Tahoma; panose-1:2 11 6 4 3 5 4 4 2 4;} /* Style Definitions */ p.MsoNormal, li.MsoNormal, div.MsoNormal {margin:0cm; margin-bottom:.0001pt; font-size:12.0pt; font-family:"Times New Roman","serif";} a:link, span.MsoHyperlink {mso-style-priority:99; color:blue; text-decoration:underline;} a:visited, span.MsoHyperlinkFollowed {mso-style-priority:99; color:purple; text-decoration:underline;} p.MsoListParagraph, li.MsoListParagraph, div.MsoListParagraph {mso-style-priority:34; margin-top:0cm; margin-right:0cm; margin-bottom:0cm; margin-left:36.0pt; margin-bottom:.0001pt; font-size:12.0pt; font-family:"Times New Roman","serif";} span.EmailStyle17 {mso-style-type:personal-reply; font-family:"Calibri","sans-serif"; color:#1F497D;} .MsoChpDefault {mso-style-type:export-only; font-family:"Calibri","sans-serif"; mso-fareast-language:EN-US;} @page WordSection1 {size:612.0pt 792.0pt; margin:70.85pt 70.85pt 70.85pt 70.85pt;} div.WordSection1 {page:WordSection1;} /* List Definitions */ @list l0 {mso-list-id:875702142; mso-list-type:hybrid; mso-list-template-ids:1020059346 67895311 67895321 67895323 67895311 67895= 321 67895323 67895311 67895321 67895323;} @list l0:level1 {mso-level-tab-stop:none; mso-level-number-position:left; text-indent:-18.0pt;} @list l0:level2 {mso-level-number-format:alpha-lower; mso-level-tab-stop:none; mso-level-number-position:left; text-indent:-18.0pt;} @list l0:level3 {mso-level-number-format:roman-lower; mso-level-tab-stop:none; mso-level-number-position:right; text-indent:-9.0pt;} @list l0:level4 {mso-level-tab-stop:none; mso-level-number-position:left; text-indent:-18.0pt;} @list l0:level5 {mso-level-number-format:alpha-lower; mso-level-tab-stop:none; mso-level-number-position:left; text-indent:-18.0pt;} @list l0:level6 {mso-level-number-format:roman-lower; mso-level-tab-stop:none; mso-level-number-position:right; text-indent:-9.0pt;} @list l0:level7 {mso-level-tab-stop:none; mso-level-number-position:left; text-indent:-18.0pt;} @list l0:level8 {mso-level-number-format:alpha-lower; mso-level-tab-stop:none; mso-level-number-position:left; text-indent:-18.0pt;} @list l0:level9 {mso-level-number-format:roman-lower; mso-level-tab-stop:none; mso-level-number-position:right; text-indent:-9.0pt;} @list l1 {mso-list-id:1363478815; mso-list-type:hybrid; mso-list-template-ids:598918462 -1236223314 67895321 67895323 67895311 678= 95321 67895323 67895311 67895321 67895323;} @list l1:level1 {mso-level-tab-stop:none; mso-level-number-position:left; margin-left:54.0pt; text-indent:-18.0pt;} @list l1:level2 {mso-level-number-format:alpha-lower; mso-level-tab-stop:none; mso-level-number-position:left; margin-left:90.0pt; text-indent:-18.0pt;} @list l1:level3 {mso-level-number-format:roman-lower; mso-level-tab-stop:none; mso-level-number-position:right; margin-left:126.0pt; text-indent:-9.0pt;} @list l1:level4 {mso-level-tab-stop:none; mso-level-number-position:left; margin-left:162.0pt; text-indent:-18.0pt;} @list l1:level5 {mso-level-number-format:alpha-lower; mso-level-tab-stop:none; mso-level-number-position:left; margin-left:198.0pt; text-indent:-18.0pt;} @list l1:level6 {mso-level-number-format:roman-lower; mso-level-tab-stop:none; mso-level-number-position:right; margin-left:234.0pt; text-indent:-9.0pt;} @list l1:level7 {mso-level-tab-stop:none; mso-level-number-position:left; margin-left:270.0pt; text-indent:-18.0pt;} @list l1:level8 {mso-level-number-format:alpha-lower; mso-level-tab-stop:none; mso-level-number-position:left; margin-left:306.0pt; text-indent:-18.0pt;} @list l1:level9 {mso-level-number-format:roman-lower; mso-level-tab-stop:none; mso-level-number-position:right; margin-left:342.0pt; text-indent:-9.0pt;} ol {margin-bottom:0cm;} ul {margin-bottom:0cm;} --></style><!--[if gte mso 9]><xml> <o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" /> </xml><![endif]--><!--[if gte mso 9]><xml> <o:shapelayout v:ext=3D"edit"> <o:idmap v:ext=3D"edit" data=3D"1" /> </o:shapelayout></xml><![endif]--></head><body lang=3DFR link=3Dblue vlink= =3Dpurple><div class=3DWordSection1><p class=3DMsoNormal><span lang=3DEN-US= style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D= '>Hi,<o:p></o:p></span></p><p class=3DMsoNormal><span lang=3DEN-US style=3D= 'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><o:p>&n= bsp;</o:p></span></p><p class=3DMsoNormal><span lang=3DEN-US style=3D'font-= size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>I have the ex= act same problems with the latest 2.5.5-0.1.<o:p></o:p></span></p><p class= =3DMsoNormal><span lang=3DEN-US style=3D'font-size:11.0pt;font-family:"Cali= bri","sans-serif";color:#1F497D'><o:p> </o:p></span></p><p class=3DMso= ListParagraph style=3D'margin-left:54.0pt;text-indent:-18.0pt;mso-list:l1 l= evel1 lfo2'><![if !supportLists]><span lang=3DEN-US style=3D'font-size:11.0= pt;font-family:"Calibri","sans-serif";color:#1F497D'><span style=3D'mso-lis= t:Ignore'>1.<span style=3D'font:7.0pt "Times New Roman"'> = </span></span></span><![endif]><span lang=3DEN-US style= =3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>I= 217;m unable to install from USB stick because after installation, the syst= em does not find it’s root volume.<o:p></o:p></span></p><p class=3DMs= oListParagraph style=3D'margin-left:54.0pt;text-indent:-18.0pt;mso-list:l1 = level1 lfo2'><![if !supportLists]><span lang=3DEN-US style=3D'font-size:11.= 0pt;font-family:"Calibri","sans-serif";color:#1F497D'><span style=3D'mso-li= st:Ignore'>2.<span style=3D'font:7.0pt "Times New Roman"'>  = ; </span></span></span><![endif]><span lang=3DEN-US style= =3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>Usin= g a CDROM, the installation hangs. First time it hanged at 75%. Second time= I tried, it hanged at 25%. No message at all, but keyboard is responsive (= lock num, console switch).<o:p></o:p></span></p><p class=3DMsoNormal><span = lang=3DEN-US style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";c= olor:#1F497D'><o:p> </o:p></span></p><p class=3DMsoNormal><span lang= =3DEN-US style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color= :#1F497D'>I could try to do some debug for you. Having the root account use= d during the installation would help. What is it?<o:p></o:p></span></p><p c= lass=3DMsoNormal><span lang=3DEN-US style=3D'font-size:11.0pt;font-family:"= Calibri","sans-serif";color:#1F497D'><o:p> </o:p></span></p><p class= =3DMsoNormal><span lang=3DEN-US style=3D'font-size:11.0pt;font-family:"Cali= bri","sans-serif";color:#1F497D'>With the CDROM installation, I’ve tr= ied with 2 different hard drives and the server was running fine with its p= revious OS, so no hardware issue here.<o:p></o:p></span></p><p class=3DMsoN= ormal><span lang=3DEN-US style=3D'font-size:11.0pt;font-family:"Calibri","s= ans-serif";color:#1F497D'>I was running the installation on a Poweredge 195= 0 server.<o:p></o:p></span></p><p class=3DMsoNormal><span lang=3DEN-US styl= e=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><o:= p> </o:p></span></p><p class=3DMsoNormal><span lang=3DEN-US style=3D'f= ont-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>Vince<o:p= p></p><p class=3DMsoNormal style=3D'margin-bottom:12.0pt'><o:p> </o:p>= </p><div><p class=3DMsoNormal>2012/10/11 Alexandre Santos <<a href=3D"ma= ilto:santosam72@gmail.com" target=3D"_blank">santosam72@gmail.com</a>><o= :p></o:p></p><div><div><p class=3DMsoNormal>2012/10/11 Mike Burns <<a hr= ef=3D"mailto:mburns@redhat.com" target=3D"_blank">mburns@redhat.com</a>>= <o:p></o:p></p><div><p class=3DMsoNormal style=3D'margin-bottom:12.0pt'>On = Thu, 2012-10-11 at 11:12 +0100, Alexandre Santos wrote:<br>> Hi,<br>>= yesterday I tried the new oVirt Node 2.5.3. I tried installing it<br>> = without the quiet flag but no luck. It hanged again and the kernel<br>> = didn't show any error on console (tty2).<br>> Later will test without th= e rhgh flag.<o:p></o:p></p></div><p class=3DMsoNormal>Default options? TUI = install? Hardware? UEFI or legacy bios?<o:p></o:p></p></div><div><p class= =3DMsoNormal><br>I always choose the troubleshooting option and then do an = install with basic video. The only thing I changed from the default kernel = boot line was the quiet flag.<br><br>Yes, TUI.<br><br>Hardware: this is an = old MSI P35Neo MB with 4 GB RAM and a Xeon 3040. The SATA disk is connected= to the onboard controller. The same problem occurred with an IDE HDD.<o:p>= </o:p></p></div></div><div><p class=3DMsoNormal><br>Without rhgb and quiet = no luck at all. Tomorrow will try with a SATA PCI Card with a Sil chip.<br>= <o:p></o:p></p></div><blockquote style=3D'border:none;border-left:sol= id #CCCCCC 1.0pt;padding:0cm 0cm 0cm 6.0pt;margin-left:4.8pt;margin-right:0= cm'><div><div><p class=3DMsoNormal> <o:p></o:p></p></div><div><blockqu= ote style=3D'border:none;border-left:solid #CCCCCC 1.0pt;padding:0cm 0cm 0c= m 6.0pt;margin-left:4.8pt;margin-right:0cm'><div><p class=3DMsoNormal style= =3D'margin-bottom:12.0pt'><br>><br>> Alex<br>><br>> BTW, now th= e hostname works on 2.5.3 :-) The network configuration is<br>> still tr= icky... sometimes I have an "Apply" sometimes only a "Back&q= uot;<br>> choice.<o:p></o:p></p></div><p class=3DMsoNormal>I *think* thi= s is a feature of being registered to ovirt-engine. Once<br>you are r= egistered, you can't change the network through the TUI<br>anymore.<br><br>= If you're not registered with Engine, please elaborate a bit and I'll<br>tr= y to figure out what is going on.<o:p></o:p></p></blockquote></div><div><p = class=3DMsoNormal><br>What you're saying makes sense. The problem I had was= that my node was booting with DHCP and the IP changed. When I got to the e= ngine / web administrator, my Host was not detected and I couldn't change i= t's IP, only the hostname... On the TUI I can't change the IP because I'm r= egistered but can't change it also on the engine. Is this correct? <o:p></o= :p></p></div><div><div><blockquote style=3D'border:none;border-left:solid #= CCCCCC 1.0pt;padding:0cm 0cm 0cm 6.0pt;margin-left:4.8pt;margin-right:0cm'>= <p class=3DMsoNormal><span style=3D'color:#888888'><br>Mike</span><o:p></o:= p></p><div><div><p class=3DMsoNormal style=3D'margin-bottom:12.0pt'><br>>= ;<br>> 2012/10/9 Alexandre Santos <<a href=3D"mailto:santosam72@gmail= .com" target=3D"_blank">santosam72@gmail.com</a>><br>> = It's working now :-)<br>><br>> &nb= sp; Thanks a lot all!<br>><br>> Alex<br>&= gt;<br>> P.S. I haven't tried installing it = on my SATA disk because I<br>> have there a = Local Node already running but I'm going to try<br>>  = ; again on another one to see if I can send to you the error<br>>= log.<br>><br>><br>> &nb= sp; 2012/10/8 Mike Burns <<a href=3D"mailto:mburns@redhat.com" ta= rget=3D"_blank">mburns@redhat.com</a>><br>> &nbs= p; On Mon, 2012-10-08 at 09:54 +0100, Alexandre= Santos<br>> wro= te:<br>> ><br= hrieb Alexandre<br>> &n= bsp; > Santos:<br>> = > > 20= 12/10/8 Fabian Deutsch<br>> &n= bsp; <<a href=3D"mailto:fabiand@redhat.com" target=3D"_blank">fab= iand@redhat.com</a>><br>> &= nbsp; > > &nb= sp; Hey,<br>> &g= t; ><br>> &nb= sp; > >  = ; Am Sonntag, den 07.10.2012, 15:29<br>> &nb= sp; +0100 schrieb<br>> = > = Alexandre<br>> &= gt; > Santos:<br= p; been<br>> &nb= sp; > > > = formated and the partitions that<br>> = existed before<br>> &n= bsp; > disappeared,<br>= > > &n= bsp; > being<br>> &n= bsp; > &n= bsp; > > there just one partition of type= <br>> "ee&q= uot;<br>> > &= nbsp; ><br>> = > ><br>> &= nbsp; > &= nbsp; > Is there any error displayed when<br= p; can take<br>> = > > &= nbsp; some time to pass the 25% (up to<br>> = ~2min or so).<br>> &nbs= p; > ><br>>= ; >  = ; > No, I think it's a kernel hang because the<br>> &nb= sp; lights on the<br>> = > = keyboard halt<br>> &nbs= p; > > and I can't change t= o tty2, etc.. I even<br>> &nbs= p; changed to tty2 and<br>> &n= bsp; > waited to<br>>  = ; >  = ; > see if there were some errors but nothing.<br>> &nb= sp; I've read that<br>> = > = "tty8" was<br>> &nb= sp; > > the logging console= but no luck also.<br>> = > > BTW, I tried with an IDE disk= and the<br>> re= sult was the same.<br>> = ><br>>  = ; ><br>> >= Mh, okay.<br>> = > Could you try = booting without the rhgb and<br>> &nb= sp; quiet kernel<br>> &= nbsp; > arguments. I<br>> &= nbsp; > &= nbsp; hope that some errors will be displayed on<br>> &nbs= p; the screen so we<br>>  = ; >  = ; get an idea<br>> &nbs= p; > about the problem.<br>>  = ; ><br>> &nbs= p; > &nbs= p; ><br>> >= ; > > If I us= e a 8 GB usb pen-drive<br>> &n= bsp; instead of the SATA<br>> = > disk, the<br>> &nb= sp; > &nb= sp; > > installation comes to an e= nd and<br>> I re= boot but then<br>> &nbs= p; > I get<br>> &nbs= p; > > = some error<br>> = > > &= nbsp; > about not<br>> &nbs= p; getting /dev/mapper/by-name/Root and the<br>> &n= bsp; > &n= bsp; boot<br>> &= gt; > fails to a= <br>> >  = ; > > dracut shell.<= br>> > = > > Any ideas?<br>&= gt; > &nb= sp; ><br>> &n= bsp; > ><br>> &nb= sp; > >= ; In the dracut shell, could you run<br>> &n= bsp; blkid and post<br>>= ; >  = ; the results?<br>> &nb= sp; > ><br>> &nbs= p; > &nbs= p; > I noticed that the USB Disk was named<br>> = RootBackup instead of<br>> &nb= sp; > &nb= sp; Root... I<br>> &nbs= p; > > then rebooted and chose uninstall = and then<br>> in= stalled oVirt<br>> &nbs= p; > Node from<br>> = > > sc= ratch and now it worked.<br>><br>><br>>  = ; Glad it worked the second time. There s= hould be 4<br>> = partitions on the<br>> = disk.<br>><br>> &nbs= p; Partition 1 is for UEFI or bios_boot depending on your<br>> &n= bsp; machine type.<br>>= Partition 2 and Pa= rtition 3 are Root and RootBackup.<br>> &nbs= p; So seeing a<br>> &nbs= p; RootBackup is correct. Not seeing a Ro= ot is<br>> incor= rect. If you rebooted<br>> &nbs= p; the host in the middle of the install, or if the<br>> &= nbsp; install hung for som= e<br>> reason, I= can see that situation happening and see it<br>> &= nbsp; working after<br>>  = ; uninstall/install.<br>><br>> &nb= sp; > &nb= sp; > I can't activate Networking because I have<br>> &= nbsp; that "no<br>>  = ; >  = ; hostname" error<br>> &n= bsp; > > mentioned in anoth= er post. I think it's<br>> &nb= sp; related to that...<br>><br>><br>> = You can't activate networking at all? &n= bsp;That is news to<br>>  = ; me. The node<br>> &nbs= p; should work perfectly fine with or without a FQDN.<br>>= <br>><br>> &g= t;<br>> ><br>= > > &n= bsp; Yes, I've also seen the hostname error. And<br>> &nbs= p; I've also seen<br>> = > = some problems<br>> &nbs= p; > with the rootfs lately.<b= r>><br>><br>> &nb= sp; Have you seen these issues with the 2.5.2 build? Or<br>>  = ; only master branch<br>&g= t; builds?<br>><= br>> > = Could you provide a screenshot/dump of the<br>> &n= bsp; console with that<br>= > > &n= bsp; error?<br>> = ><br>>  = ; > - fabian<br>> &n= bsp; ><br>> &= nbsp; ><br>> = > Ok! I'll send them as soon as possible.<br= p; > <a href=3D"mailto:Users@ovirt.org" targ= et=3D"_blank">Users@ovirt.org</a><br>>  = ; > <a href=3D"http://lists.ovirt.org/mailman/listi= nfo/users" target=3D"_blank">http://lists.ovirt.org/mailman/listinfo/users<= /a><br>><br>><br>><br>><br>><br>> _______________________= ________________________<br>> Users mailing list<br>> <a href=3D"mail= to:Users@ovirt.org" target=3D"_blank">Users@ovirt.org</a><br>> <a href= =3D"http://lists.ovirt.org/mailman/listinfo/users" target=3D"_blank">http:/= /lists.ovirt.org/mailman/listinfo/users</a><br><br><o:p></o:p></p></div></d= iv></blockquote></div></div></div><p class=3DMsoNormal><o:p> </o:p></p=
</blockquote></div><p class=3DMsoNormal><br><br>-- <br>This message has be= en scanned for viruses and <br>dangerous content by <a href=3D"http://www.m= ailscanner.info/"><b>MailScanner</b></a>, and is <br>believed to be clean. = <o:p></o:p></p></div><br />--=20 <br />This message has been scanned for viruses and <br />dangerous content by <a href=3D"http://www.mailscanner.info/"><b>MailScanner</b></a>, and is <br />believed to be clean. </body></html>
--_000_7AFA66599AC41847AD8E021A1DBB9D1426FAB33C19pandoreankama_--