Re: [Users] SPICE behind NAT
On Sat, Feb 8, 2014 at 9:11 AM, Alan Murrell <lists(a)murrell.ca> wrote:
Hi Andrew,
Thanks for the reply.
Quoting "Andrew Lau" <andrew(a)andrewklau.com>:
Just install squid proxy and port forward the 3128 port through your
> firewall you should be all good.
>
Is squid installed on your oVirt box or is it on your firewall? Or did ypu
srtup a seperate box ad the proxy? What you post above suggests you
installed it in the oVirt machine?
Yup, I install squid on the oVirt engine as it was easier to setup and
configure. No point setting up a dedicated box just for the spice proxy
unless you need some strict policies.
Here's a quick snippet from my notes:
>
[snip]
btw the 172.16.0/24 addresses are the oVirt hosts.
engine-config -s SpiceProxyDefault=http://public_ip_address:3128/
>
Ah, so the IP I put is the *public* IP on the firewall (or at least the
one I am connecting to), and not the private IP of the machine Squid is
installed on?
Yup, this is the public IP address on the firewall.
-Alan
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Attachments:
- attachment.html (text/html — 3.1 KB)