Re: [Users] Questions on ovirt 3.3 browser based spice/novnc working

From: "Dead Horse" <deadhorseconsulting(a)gmail.com&gt; To: "Alon Bar-Lev" <alonbl(a)redhat.com&gt; Cc: "users" <users(a)ovirt.org&gt; Sent: Thursday, August 1, 2013 11:06:11 PM Subject: Re: [Users] Questions on ovirt 3.3 browser based spice/novnc working Attached Firefox and Chrome screenshots of Certificates. errors thrown by websockify Firefox: 1: handler exception: [Errno 1] _ssl.c:1359: error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca Chrome: 11: handler exception: WSRequestHandler instance has no attribute 'last_code' For Firefox it looks like firefox needs a bit of proding to get it to accept the Websocket CA Cert: https://github.com/kanaka/websockify/issues/34 The error generated by chrome seems to be a websockify issue: https://github.com/kanaka/noVNC/issues/86 https://github.com/kanaka/websockify/issues/22#issuecomment-3263065 https://github.com/kanaka/noVNC/issues/177 In any event I got both Chrome and Firefox working by manually browsing to: https://ENGINEFQDN:6100 and accepting the self signed cert

Not pretty but it worked. - DHC On Thu, Aug 1, 2013 at 2:08 PM, Alon Bar-Lev <alonbl(a)redhat.com&gt; wrote: > > > ----- Original Message ----- > > From: "Dead Horse" <deadhorseconsulting(a)gmail.com&gt; > > To: "Alon Bar-Lev" <alonbl(a)redhat.com&gt; > > Cc: "users" <users(a)ovirt.org&gt; > > Sent: Thursday, August 1, 2013 9:59:14 PM > > Subject: Re: [Users] Questions on ovirt 3.3 browser based spice/novnc > working > > > > That did the trick for getting the websocket proxy configured ( i backed > > out all my changes prior to running engine-setup). I do notice that it > > still seems to leave the ovirt-websocket-proxy.conf in it's default state > > and makes no dedications to it. Instead it generated > > /etc/ovirt-engine/ovirt-websocket-proxy.conf.d/10-setup.conf > > > > I also noted engine setup generated: > > /etc/pki/ovirt-engine/certs/websocket-proxy.cer > > /etc/pki/ovirt-engine/keys/websocket-proxy.p12 > > /etc/pki/ovirt-engine/keys/websocket-proxy.key.nopass > > /etc/pki/ovirt-engine/requests/websocket-proxy.req > > > > None the less still neither spice nor novnc will connect. I tried > changing > > Engine:6100 to EngineIP:6100 so that IP would be used instead. However > > using either the FQDN or IP still yielded the same results. > > You should not touch anything... all should be configured... > Make sure your browser trust the *CA* of the engine and not the engine > certificate directly. > And try to open vnc console via webadmin. > > > There was nothing interesting in the logs either. I do notice that whilst > > the websocket-proxy service is running I never see an websockify > processes > > but instead in /var/log/messages I see: > > Aug 1 13:44:10 ovirtfoo ovirt-websocket-proxy.py[435]: 11: handler > > exception: [Errno 1] _ssl.c:1359: error:14094418:SSL > > routines:SSL3_READ_BYTES:tlsv1 alert unknown ca > > > > Thus I changed SSL_ONLY=True to SSL_ONLY=False in > > /etc/ovirt-engine/ovirt-websocket-proxy.conf.d/10-setup.conf and > restarted > > engine and websocket-proxy > > No dice it still generated the same error as above during an attempted > > connection to /var/log/messages > > > > I also not the following error message at VM power off (albeit I am > > guessing it has nothing to do with this issue): > > 2013-08-01 13:41:03,742 ERROR > > [org.ovirt.engine.core.vdsbroker.DestroyVmVDSCommand] (pool-6-thread-50) > > [304efb3e] VDS::destroy Failed destroying vm > > fec3260c-871a-4fbe-a006-9eee4fbfbbcc in vds = > > 5713e5c8-6252-4bce-a3f6-bbd8e1e6eb57 : ovirtnodefoo, error = > > org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: > > VDSGenericException: VDSErrorException: Failed to DestroyVDS, error = > > Unexpected exception > > > > - DHC > > > > > > On Thu, Aug 1, 2013 at 1:07 PM, Alon Bar-Lev <alonbl(a)redhat.com&gt; wrote: > > > > > If you install the proxy on the engine machine you just need: > > > > > > # yum install ovirt-engine-websocket-proxy > > > # engine-setup > > > > > > then answer yes when prompt if you like to configure websocket proxy. > > > > > > you can execute engine-setup again even if you already installed. > > > > > > ----- Original Message ----- > > > > From: "Dead Horse" <deadhorseconsulting(a)gmail.com&gt; > > > > To: &quot;&lt;users(a)ovirt.org&gt;&quot; <users(a)ovirt.org&gt; > > > > Sent: Thursday, August 1, 2013 9:01:47 PM > > > > Subject: [Users] Questions on ovirt 3.3 browser based spice/novnc > working > > > > > > > > After Referencing: > > > > http://www.ovirt.org/Features/noVNC_console > > > > http://www.ovirt.org/Features/SpiceHTML5 > > > > > > > > and looking at some of the related engine code. > > > > > > > > I am still attempting to get the spice/novnc browser based consoles > to > > > work. > > > > > > > > I am working from a build from master yesterday I used to upgrade > over a > > > > previous 3.3 master build from about a month back. > > > > > > > > VDSM version on host is 4.12.0 built minutes ago. > > > > > > > > I have installed and configured the websocket proxy like so: > > > > > > > > Set WebSocketProxy to engine ENGINEIP port 6100 > > > > engine-config -s WebSocketProxy=ENGINEIP:6100 > > > > > > > > /usr/share/ovirt-engine/bin/pki-enroll-pkcs12.sh > --name=websocket-proxy > > > > --password=install --subject="/C=US/O=DHC/CN=ENGINEFQDN" > > > > > > > > This generates: > > > > /etc/pki/ovirt-engine/keys/websocket-proxy.p12 > > > > /etc/pki/ovirt-engine/certs/websocket-proxy.cer > > > > /etc/pki/ovirt-engine/requests/websocket-proxy.req > > > > > > > > However it does not generate the key that websockify wants so we do: > > > > openssl pkcs12 -in websocket-proxy.p12 -nocerts -nodes -out > > > > /etc/pki/ovirt-engine/keys/websocket-proxy.key > > > > > > > > The configuration of ovirt-websocket-proxy: > > > > PROXY_HOST=* > > > > PROXY_PORT=6100 > > > > SOURCE_IS_IPV6=False > > > > SSL_CERTIFICATE=/etc/pki/ovirt-engine/certs/websocket-proxy.cer > > > > SSL_KEY=/etc/pki/ovirt-engine/keys/websocket-proxy.key > > > > FORCE_DATA_VERIFICATION=False > > > > CERT_FOR_DATA_VERIFICATION=/etc/pki/ovirt-engine/certs/engine.cer > > > > SSL_ONLY=True > > > > TRACE_ENABLE=False > > > > TRACE_FILE= > > > > ENGINE_USR="/usr/share/ovirt-engine" > > > > > > > > Install spice-html5 > > > > git clone http://anongit.freedesktop.org/git/spice/spice-html5.git > > > > mv spice-html5 /usr/share > > > > > > > > Test spice: > > > > In Webadmin UI we set create a VM, set display as spice, start it > and set > > > > it's console to spice-html5. > > > > Result spice-html client opens in a new tab but does not connect. > > > > > > > > From engine.log: > > > > 2013-08-01 12:49:52,352 INFO > > > [org.ovirt.engine.core.bll.SetVmTicketCommand] > > > > (ajp--127.0.0.1-8702-9) Running command: SetVmTicketCommand internal: > > > false. > > > > Entities affected : ID: fec3260c-871a-4fbe-a006-9eee4fbfbbcc Type: VM > > > > 2013-08-01 12:49:52,371 INFO > > > > [org.ovirt.engine.core.vdsbroker.vdsbroker.SetVmTicketVDSCommand] > > > > (ajp--127.0.0.1-8702-9) START, SetVmTicketVDSCommand(HostName = > > > > ovirtnodefoo, HostId = 5713e5c8-6252-4bce-a3f6-bbd8e1e6eb57, > > > > vmId=fec3260c-871a-4fbe-a006-9eee4fbfbbcc, ticket=TKfzUQJLLrUI, > > > > validTime=120,m userName=admin@internal, > > > > userId=fdfc627c-d875-11e0-90f0-83df133b58cc), log id: 5d258049 > > > > 2013-08-01 12:49:52,445 INFO > > > > [org.ovirt.engine.core.vdsbroker.vdsbroker.SetVmTicketVDSCommand] > > > > (ajp--127.0.0.1-8702-9) FINISH, SetVmTicketVDSCommand, log id: > 5d258049 > > > > > > > > Test novnc: > > > > In Webadmin UI we set create a VM, set display as VNC, start it and > set > > > it's > > > > console to novnc. > > > > Result novnc client opens in a new tab but does not connect, but does > > > display > > > > error: "Server disconnected (code: 1006) > > > > > > > > From engine.log: > > > > 2013-08-01 12:50:44,800 INFO > > > [org.ovirt.engine.core.bll.SetVmTicketCommand] > > > > (ajp--127.0.0.1-8702-9) Running command: SetVmTicketCommand internal: > > > false. > > > > Entities affected : ID: fec3260c-871a-4fbe-a006-9eee4fbfbbcc Type: VM > > > > 2013-08-01 12:50:44,833 INFO > > > > [org.ovirt.engine.core.vdsbroker.vdsbroker.SetVmTicketVDSCommand] > > > > (ajp--127.0.0.1-8702-9) START, SetVmTicketVDSCommand(HostName = > > > > ovirtnodefoo, HostId = 5713e5c8-6252-4bce-a3f6-bbd8e1e6eb57, > > > > vmId=fec3260c-871a-4fbe-a006-9eee4fbfbbcc, ticket=IPWOWh6U9erd, > > > > validTime=120,m userName=admin@internal, > > > > userId=fdfc627c-d875-11e0-90f0-83df133b58cc), log id: bff6161 > > > > 2013-08-01 12:50:44,917 INFO > > > > [org.ovirt.engine.core.vdsbroker.vdsbroker.SetVmTicketVDSCommand] > > > > (ajp--127.0.0.1-8702-9) FINISH, SetVmTicketVDSCommand, log id: > bff6161 > > > > > > > > I verified connection of both the spice/vnc console directly at the > host > > > > level with a quick connect via virt-viewer. > > > > > > > > A quick scan with nmap of engine and host to verify sockets are open: > > > > > > > > Nmap scan report for engine > > > > Host is up (0.0042s latency). > > > > Not shown: 995 closed ports > > > > PORT STATE SERVICE > > > > 22/tcp open ssh > > > > 80/tcp open http > > > > 111/tcp open rpcbind > > > > 443/tcp open https > > > > 6100/tcp open synchronet-db > > > > > > > > Nmap scan report for host > > > > Host is up (0.0045s latency). > > > > Not shown: 997 closed ports > > > > PORT STATE SERVICE > > > > 22/tcp open ssh > > > > 111/tcp open rpcbind > > > > 5900/tcp open vnc > > > > > > > > For grins I stopped the websocket proxy and manually started a > websockify > > > > like so: > > > > websockify 3.57.111.11:6100 3.57.111.12:5900 > > > > --cert=/etc/pki/ovirt-engine/certs/websocket-proxy.cer > > > > --key=/etc/pki/ovirt-engine/keys/websocket-proxy.key > > > > > > > > WARNING: no 'numpy' module, HyBi protocol is slower or disabled > > > > WebSocket server settings: > > > > - Listen on ENGINEIP:6100 > > > > - Flash security policy server > > > > - SSL/TLS support > > > > - proxying from ENGINEIP:6100 to HOSTIP:5900 > > > > > > > > Attempting another connection via > > > > > https://ENGINEFQDN//ovirt-engine-novnc-main.html?host=ENGINEIP&port=6100 > > > > results in: > > > > > > > > 1: handler exception: [Errno 1] _ssl.c:1359: error:14094418:SSL > > > > routines:SSL3_READ_BYTES:tlsv1 alert unknown ca > > > > > > > > > > > > I should also note in case it matters that the SSLEnabled=false, and > > > > EnableSpiceRootCertificateValidation are both set as false are set > in my > > > > engine options. > > > > > > > > Am I doing something wrong here, I don't see any reason this should > not > > > work? > > > > > > > > - DHC > > > > > > > > _______________________________________________ > > > > Users mailing list > > > > Users(a)ovirt.org > > > > http://lists.ovirt.org/mailman/listinfo/users > > > > > > > > > >