[ovirt-users] Fwd: Re: Fwd: Fwd: Issues with Gluster Domain

Another question What version could I downgrade to safely ? I am at 6.9 . Thank You For Your Help !! On Sun, Jun 21, 2020 at 11:38 PM Strahil Nikolov <hunter86_bg(a)yahoo.com&gt; wrote: > You are definitely reading it wrong. > 1. I didn't create a new storage domain ontop this new volume. > 2. I used cli > > Something like this (in your case it should be 'replica 3'): > gluster volume create newvol replica 3 arbiter 1 ovirt1:/new/brick/path > ovirt2:/new/brick/path ovirt3:/new/arbiter/brick/path > gluster volume start newvol > > #Detach oldvol from ovirt > > mount -t glusterfs ovirt1:/oldvol /mnt/oldvol > mount -t glusterfs ovirt1:/newvol /mnt/newvol > cp -a /mnt/oldvol/* /mnt/newvol > > #Add only newvol as a storage domain in oVirt > #Import VMs > > I still think that you should downgrade your gluster packages!!! > > Best Regards, > Strahil Nikolov > > На 22 юни 2020 г. 0:43:46 GMT+03:00, C Williams <cwilliams3320(a)gmail.com&gt; > написа: > >Strahil, > > > >It sounds like you used a "System Managed Volume" for the new storage > >domain,is that correct? > > > >Thank You For Your Help ! > > > >On Sun, Jun 21, 2020 at 5:40 PM C Williams <cwilliams3320(a)gmail.com&gt; > >wrote: > > > >> Strahil, > >> > >> So you made another oVirt Storage Domain -- then copied the data with > >cp > >> -a from the failed volume to the new volume. > >> > >> At the root of the volume there will be the old domain folder id ex > >> 5fe3ad3f-2d21-404c-832e-4dc7318ca10d > >> in my case. Did that cause issues with making the new domain since > >it is > >> the same folder id as the old one ? > >> > >> Thank You For Your Help ! > >> > >> On Sun, Jun 21, 2020 at 5:18 PM Strahil Nikolov > &gt;&lt;hunter86_bg(a)yahoo.com&gt; > >> wrote: > >> > >>> In my situation I had only the ovirt nodes. > >>> > >>> На 21 юни 2020 г. 22:43:04 GMT+03:00, C Williams > &gt;&lt;cwilliams3320(a)gmail.com&gt; > >>> написа: > >>> >Strahil, > >>> > > >>> >So should I make the target volume on 3 bricks which do not have > >ovirt > >>> >-- > >>> >just gluster ? In other words (3) Centos 7 hosts ? > >>> > > >>> >Thank You For Your Help ! > >>> > > >>> >On Sun, Jun 21, 2020 at 3:08 PM Strahil Nikolov > &gt;&lt;hunter86_bg(a)yahoo.com&gt; > >>> >wrote: > >>> > > >>> >> I created a fresh volume (which is not an ovirt sgorage > >domain), > >>> >set > >>> >> the original storage domain in maintenance and detached it. > >>> >> Then I 'cp -a ' the data from the old to the new volume. Next, > >I > >>> >just > >>> >> added the new storage domain (the old one was a kind of a > >>> >> 'backup') - pointing to the new volume name. > >>> >> > >>> >> If you observe issues , I would recommend you to downgrade > >>> >> gluster packages one node at a time . Then you might be able > >to > >>> >> restore your oVirt operations. > >>> >> > >>> >> Best Regards, > >>> >> Strahil Nikolov > >>> >> > >>> >> На 21 юни 2020 г. 18:01:31 GMT+03:00, C Williams > >>> &gt;&lt;cwilliams3320(a)gmail.com&gt; > >>> >> написа: > >>> >> >Strahil, > >>> >> > > >>> >> >Thanks for the follow up ! > >>> >> > > >>> >> >How did you copy the data to another volume ? > >>> >> > > >>> >> >I have set up another storage domain GLCLNEW1 with a new volume > >>> >imgnew1 > >>> >> >. > >>> >> >How would you copy all of the data from the problematic domain > >GLCL3 > >>> >> >with > >>> >> >volume images3 to GLCLNEW1 and volume imgnew1 and preserve all > >the > >>> >VMs, > >>> >> >VM > >>> >> >disks, settings, etc. ? > >>> >> > > >>> >> >Remember all of the regular ovirt disk copy, disk move, VM > >export > >>> >> >tools > >>> >> >are failing and my VMs and disks are trapped on domain GLCL3 and > >>> >volume > >>> >> >images3 right now. > >>> >> > > >>> >> >Please let me know > >>> >> > > >>> >> >Thank You For Your Help ! > >>> >> > > >>> >> > > >>> >> > > >>> >> > > >>> >> > > >>> >> >On Sun, Jun 21, 2020 at 8:27 AM Strahil Nikolov > >>> &gt;&lt;hunter86_bg(a)yahoo.com&gt; > >>> >> >wrote: > >>> >> > > >>> >> >> Sorry to hear that. > >>> >> >> I can say that for me 6.5 was working, while 6.6 didn't > >and I > >>> >> >upgraded > >>> >> >> to 7.0 . > >>> >> >> In the ended , I have ended with creating a new fresh > >volume > >>> >and > >>> >> >> physically copying the data there, then I detached the > >storage > >>> >> >domains and > >>> >> >> attached to the new ones (which holded the old data), but > >I > >>> >> >could > >>> >> >> afford the downtime. > >>> >> >> Also, I can say that v7.0 ( but not 7.1 or anything later) > >>> >also > >>> >> >> worked without the ACL issue, but it causes some trouble > >in > >>> >oVirt > >>> >> >- so > >>> >> >> avoid that unless you have no other options. > >>> >> >> > >>> >> >> Best Regards, > >>> >> >> Strahil Nikolov > >>> >> >> > >>> >> >> > >>> >> >> > >>> >> >> > >>> >> >> На 21 юни 2020 г. 4:39:46 GMT+03:00, C Williams > >>> >> &gt;&lt;cwilliams3320(a)gmail.com&gt; > >>> >> >> написа: > >>> >> >> >Hello, > >>> >> >> > > >>> >> >> >Upgrading diidn't help > >>> >> >> > > >>> >> >> >Still acl errors trying to use a Virtual Disk from a VM > >>> >> >> > > >>> >> >> >[root@ov06 bricks]# tail bricks-brick04-images3.log | grep > >acl > >>> >> >> >[2020-06-21 01:33:45.665888] I [MSGID: 139001] > >>> >> >> >[posix-acl.c:263:posix_acl_log_permit_denied] > >>> >> >0-images3-access-control: > >>> >> >> >client: > >>> >> >> > >>> >> >> > >>> >> > >>> >> > >>> > >>> > > >>>>CTX_ID:3697a7f1-44fb-4258-96b0-98cb4137d195-GRAPH_ID:0-PID:6706-HOST:ov06.ntc.srcle.com-PC_NAME:images3-client-0-RECON_NO:-0, > >>> >> >> >gfid: be318638-e8a0-4c6d-977d-7a937aa84806, > >>> >> >> >req(uid:107,gid:107,perm:1,ngrps:3), > >>> >> >> >ctx(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, > >acl:-) > >>> >> >> >[Permission denied] > >>> >> >> >The message "I [MSGID: 139001] > >>> >> >> >[posix-acl.c:263:posix_acl_log_permit_denied] > >>> >> >0-images3-access-control: > >>> >> >> >client: > >>> >> >> > >>> >> >> > >>> >> > >>> >> > >>> > >>> > > >>>>CTX_ID:3697a7f1-44fb-4258-96b0-98cb4137d195-GRAPH_ID:0-PID:6706-HOST:ov06.ntc.srcle.com-PC_NAME:images3-client-0-RECON_NO:-0, > >>> >> >> >gfid: be318638-e8a0-4c6d-977d-7a937aa84806, > >>> >> >> >req(uid:107,gid:107,perm:1,ngrps:3), > >>> >> >> >ctx(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, > >acl:-) > >>> >> >> >[Permission denied]" repeated 2 times between [2020-06-21 > >>> >> >> >01:33:45.665888] > >>> >> >> >and [2020-06-21 01:33:45.806779] > >>> >> >> > > >>> >> >> >Thank You For Your Help ! > >>> >> >> > > >>> >> >> >On Sat, Jun 20, 2020 at 8:59 PM C Williams > >>> &gt;&lt;cwilliams3320(a)gmail.com&gt; > >>> >> >> >wrote: > >>> >> >> > > >>> >> >> >> Hello, > >>> >> >> >> > >>> >> >> >> Based on the situation, I am planning to upgrade the 3 > >affected > >>> >> >> >hosts. > >>> >> >> >> > >>> >> >> >> My reasoning is that the hosts/bricks were attached to 6.9 > >at > >>> >one > >>> >> >> >time. > >>> >> >> >> > >>> >> >> >> Thanks For Your Help ! > >>> >> >> >> > >>> >> >> >> On Sat, Jun 20, 2020 at 8:38 PM C Williams > >>> >> &gt;&lt;cwilliams3320(a)gmail.com&gt; > >>> >> >> >> wrote: > >>> >> >> >> > >>> >> >> >>> Strahil, > >>> >> >> >>> > >>> >> >> >>> The gluster version on the current 3 gluster hosts is 6.7 > >>> >(last > >>> >> >> >update > >>> >> >> >>> 2/26). These 3 hosts provide 1 brick each for the replica > >3 > >>> >> >volume. > >>> >> >> >>> > >>> >> >> >>> Earlier I had tried to add 6 additional hosts to the > >cluster. > >>> >> >Those > >>> >> >> >new > >>> >> >> >>> hosts were 6.9 gluster. > >>> >> >> >>> > >>> >> >> >>> I attempted to make a new separate volume with 3 bricks > >>> >provided > >>> >> >by > >>> >> >> >the 3 > >>> >> >> >>> new gluster 6.9 hosts. After having many errors from the > >>> >oVirt > >>> >> >> >interface, > >>> >> >> >>> I gave up and removed the 6 new hosts from the cluster. > >That > >>> >is > >>> >> >> >where the > >>> >> >> >>> problems started. The intent was to expand the gluster > >cluster > >>> >> >while > >>> >> >> >making > >>> >> >> >>> 2 new volumes for that cluster. The ovirt compute cluster > >>> >would > >>> >> >> >allow for > >>> >> >> >>> efficient VM migration between 9 hosts -- while having > >>> >separate > >>> >> >> >gluster > >>> >> >> >>> volumes for safety purposes. > >>> >> >> >>> > >>> >> >> >>> Looking at the brick logs, I see where there are acl > >errors > >>> >> >starting > >>> >> >> >from > >>> >> >> >>> the time of the removal of the 6 new hosts. > >>> >> >> >>> > >>> >> >> >>> Please check out the attached brick log from 6/14-18. The > >>> >events > >>> >> >> >started > >>> >> >> >>> on 6/17. > >>> >> >> >>> > >>> >> >> >>> I wish I had a downgrade path. > >>> >> >> >>> > >>> >> >> >>> Thank You For The Help !! > >>> >> >> >>> > >>> >> >> >>> On Sat, Jun 20, 2020 at 7:47 PM Strahil Nikolov > >>> >> >> &gt;&lt;hunter86_bg(a)yahoo.com&gt; > >>> >> >> >>> wrote: > >>> >> >> >>> > >>> >> >> >>>> Hi , > >>> >> >> >>>> > >>> >> >> >>>> > >>> >> >> >>>> This one really looks like the ACL bug I was hit with > >when I > >>> >> >> >updated > >>> >> >> >>>> from Gluster v6.5 to 6.6 and later from 7.0 to 7.2. > >>> >> >> >>>> > >>> >> >> >>>> Did you update your setup recently ? Did you upgrade > >gluster > >>> >> >also ? > >>> >> >> >>>> > >>> >> >> >>>> You have to check the gluster logs in order to verify > >that, > >>> >so > >>> >> >you > >>> >> >> >can > >>> >> >> >>>> try: > >>> >> >> >>>> > >>> >> >> >>>> 1. Set Gluster logs to trace level (for details check: > >>> >> >> >>>> > >>> >> >> > > >>> >> >> > >>> >> > > >>> >> > >>> > > >>> > > >

> >>> >> >> >>>> ) > >>> >> >> >>>> 2. Power up a VM that was already off , or retry the > >>> >procedure > >>> >> >from > >>> >> >> >the > >>> >> >> >>>> logs you sent. > >>> >> >> >>>> 3. Stop the trace level of the logs > >>> >> >> >>>> 4. Check libvirt logs on the host that was supposed to > >power > >>> >up > >>> >> >the > >>> >> >> >VM > >>> >> >> >>>> (in case a VM was powered on) > >>> >> >> >>>> 5. Check the gluster brick logs on all nodes for ACL > >errors. > >>> >> >> >>>> Here is a sample from my old logs: > >>> >> >> >>>> > >>> >> >> >>>> gluster_bricks-data_fast4-data_fast4.log:[2020-03-18 > >>> >> >> >13:19:41.489047] I > >>> >> >> >>>> [MSGID: 139001] > >[posix-acl.c:262:posix_acl_log_permit_denied] > >>> >> >> >>>> 0-data_fast4-access-control: client: > >CTX_ID:4a654305-d2e4- > >>> >> >> >>>> > >>> >> >> > >>> >> >> > >>> >> > >>> >> > >>> > >>> > > >>>>4a10-bad9-58d670d99a97-GRAPH_ID:0-PID:32412-HOST:ovirt1.localdomain-PC_NAME:data_fast4-client-0-RECON_NO:-19, > >>> >> >> >>>> gfid: be318638-e8a0-4c6d-977d-7a937aa84806, > >>> >> >> >>>> req(uid:36,gid:36,perm:1,ngrps:3), ctx > >>> >> >> >>>> (uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, > >acl:-) > >>> >> >> >>>> [Permission denied] > >>> >> >> >>>> gluster_bricks-data_fast4-data_fast4.log:[2020-03-18 > >>> >> >> >13:22:51.818796] I > >>> >> >> >>>> [MSGID: 139001] > >[posix-acl.c:262:posix_acl_log_permit_denied] > >>> >> >> >>>> 0-data_fast4-access-control: client: > >CTX_ID:4a654305-d2e4- > >>> >> >> >>>> > >>> >> >> > >>> >> >> > >>> >> > >>> >> > >>> > >>> > > >>>>4a10-bad9-58d670d99a97-GRAPH_ID:0-PID:32412-HOST:ovirt1.localdomain-PC_NAME:data_fast4-client-0-RECON_NO:-19, > >>> >> >> >>>> gfid: be318638-e8a0-4c6d-977d-7a937aa84806, > >>> >> >> >>>> req(uid:36,gid:36,perm:1,ngrps:3), ctx > >>> >> >> >>>> (uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, > >acl:-) > >>> >> >> >>>> [Permission denied] > >>> >> >> >>>> gluster_bricks-data_fast4-data_fast4.log:[2020-03-18 > >>> >> >> >13:24:43.732856] I > >>> >> >> >>>> [MSGID: 139001] > >[posix-acl.c:262:posix_acl_log_permit_denied] > >>> >> >> >>>> 0-data_fast4-access-control: client: > >CTX_ID:4a654305-d2e4- > >>> >> >> >>>> > >>> >> >> > >>> >> >> > >>> >> > >>> >> > >>> > >>> > > >>>>4a10-bad9-58d670d99a97-GRAPH_ID:0-PID:32412-HOST:ovirt1.localdomain-PC_NAME:data_fast4-client-0-RECON_NO:-19, > >>> >> >> >>>> gfid: be318638-e8a0-4c6d-977d-7a937aa84806, > >>> >> >> >>>> req(uid:36,gid:36,perm:1,ngrps:3), ctx > >>> >> >> >>>> (uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, > >acl:-) > >>> >> >> >>>> [Permission denied] > >>> >> >> >>>> gluster_bricks-data_fast4-data_fast4.log:[2020-03-18 > >>> >> >> >13:26:50.758178] I > >>> >> >> >>>> [MSGID: 139001] > >[posix-acl.c:262:posix_acl_log_permit_denied] > >>> >> >> >>>> 0-data_fast4-access-control: client: > >CTX_ID:4a654305-d2e4- > >>> >> >> >>>> > >>> >> >> > >>> >> >> > >>> >> > >>> >> > >>> > >>> > > >>>>4a10-bad9-58d670d99a97-GRAPH_ID:0-PID:32412-HOST:ovirt1.localdomain-PC_NAME:data_fast4-client-0-RECON_NO:-19, > >>> >> >> >>>> gfid: be318638-e8a0-4c6d-977d-7a937aa84806, > >>> >> >> >>>> req(uid:36,gid:36,perm:1,ngrps:3), ctx > >>> >> >> >>>> (uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, > >acl:-) > >>> >> >> >>>> [Permission denied] > >>> >> >> >>>> > >>> >> >> >>>> > >>> >> >> >>>> In my case , the workaround was to downgrade the gluster > >>> >> >packages > >>> >> >> >on all > >>> >> >> >>>> nodes (and reboot each node 1 by 1 ) if the major version > >is > >>> >the > >>> >> >> >same, but > >>> >> >> >>>> if you upgraded to v7.X - then you can try the v7.0 . > >>> >> >> >>>> > >>> >> >> >>>> Best Regards, > >>> >> >> >>>> Strahil Nikolov > >>> >> >> >>>> > >>> >> >> >>>> > >>> >> >> >>>> > >>> >> >> >>>> > >>> >> >> >>>> > >>> >> >> >>>> > >>> >> >> >>>> В събота, 20 юни 2020 г., 18:48:42 ч. Гринуич+3, C > >Williams < > >>> >> >> >>>> cwilliams3320(a)gmail.com&gt; написа: > >>> >> >> >>>> > >>> >> >> >>>> > >>> >> >> >>>> > >>> >> >> >>>> > >>> >> >> >>>> > >>> >> >> >>>> Hello, > >>> >> >> >>>> > >>> >> >> >>>> Here are additional log tiles as well as a tree of the > >>> >> >problematic > >>> >> >> >>>> Gluster storage domain. During this time I attempted to > >copy > >>> >a > >>> >> >> >virtual disk > >>> >> >> >>>> to another domain, move a virtual disk to another domain > >and > >>> >run > >>> >> >a > >>> >> >> >VM where > >>> >> >> >>>> the virtual hard disk would be used. > >>> >> >> >>>> > >>> >> >> >>>> The copies/moves failed and the VM went into pause mode > >when > >>> >the > >>> >> >> >virtual > >>> >> >> >>>> HDD was involved. > >>> >> >> >>>> > >>> >> >> >>>> Please check these out. > >>> >> >> >>>> > >>> >> >> >>>> Thank You For Your Help ! > >>> >> >> >>>> > >>> >> >> >>>> On Sat, Jun 20, 2020 at 9:54 AM C Williams > >>> >> >> &gt;&lt;cwilliams3320(a)gmail.com&gt; > >>> >> >> >>>> wrote: > >>> >> >> >>>> > Strahil, > >>> >> >> >>>> > > >>> >> >> >>>> > I understand. Please keep me posted. > >>> >> >> >>>> > > >>> >> >> >>>> > Thanks For The Help ! > >>> >> >> >>>> > > >>> >> >> >>>> > On Sat, Jun 20, 2020 at 4:36 AM Strahil Nikolov > >>> >> >> &gt;&lt;hunter86_bg(a)yahoo.com&gt; > >>> >> >> >>>> wrote: > >>> >> >> >>>> >> Hey C Williams, > >>> >> >> >>>> >> > >>> >> >> >>>> >> sorry for the delay, but I couldn't get somw time to > >>> >check > >>> >> >your > >>> >> >> >>>> logs. Will try a little bit later. > >>> >> >> >>>> >> > >>> >> >> >>>> >> Best Regards, > >>> >> >> >>>> >> Strahil Nikolov > >>> >> >> >>>> >> > >>> >> >> >>>> >> На 20 юни 2020 г. 2:37:22 GMT+03:00, C Williams < > >>> >> >> >>>> cwilliams3320(a)gmail.com&gt; написа: > >>> >> >> >>>> >>>Hello, > >>> >> >> >>>> >>> > >>> >> >> >>>> >>>Was wanting to follow up on this issue. Users are > >>> >impacted. > >>> >> >> >>>> >>> > >>> >> >> >>>> >>>Thank You > >>> >> >> >>>> >>> > >>> >> >> >>>> >>>On Fri, Jun 19, 2020 at 9:20 AM C Williams > >>> >> >> &gt;&lt;cwilliams3320(a)gmail.com&gt; > >>> >> >> >>>> >>>wrote: > >>> >> >> >>>> >>> > >>> >> >> >>>> >>>> Hello, > >>> >> >> >>>> >>>> > >>> >> >> >>>> >>>> Here are the logs (some IPs are changed ) > >>> >> >> >>>> >>>> > >>> >> >> >>>> >>>> ov05 is the SPM > >>> >> >> >>>> >>>> > >>> >> >> >>>> >>>> Thank You For Your Help ! > >>> >> >> >>>> >>>> > >>> >> >> >>>> >>>> On Thu, Jun 18, 2020 at 11:31 PM Strahil Nikolov > >>> >> >> >>>> &gt;&gt;&gt;&lt;hunter86_bg(a)yahoo.com&gt; > >>> >> >> >>>> >>>> wrote: > >>> >> >> >>>> >>>> > >>> >> >> >>>> >>>>> Check on the hosts tab , which is your current SPM > >>> >(last > >>> >> >> >column in > >>> >> >> >>>> >>>Admin > >>> >> >> >>>> >>>>> UI). > >>> >> >> >>>> >>>>> Then open the /var/log/vdsm/vdsm.log and repeat > >the > >>> >> >> >operation. > >>> >> >> >>>> >>>>> Then provide the log from that host and the > >engine's > >>> >log > >>> >> >(on > >>> >> >> >the > >>> >> >> >>>> >>>>> HostedEngine VM or on your standalone engine). > >>> >> >> >>>> >>>>> > >>> >> >> >>>> >>>>> Best Regards, > >>> >> >> >>>> >>>>> Strahil Nikolov > >>> >> >> >>>> >>>>> > >>> >> >> >>>> >>>>> На 18 юни 2020 г. 23:59:36 GMT+03:00, C Williams > >>> >> >> >>>> &gt;&gt;&gt;&lt;cwilliams3320(a)gmail.com&gt; > >>> >> >> >>>> >>>>> написа: > >>> >> >> >>>> >>>>> >Resending to eliminate email issues > >>> >> >> >>>> >>>>> > > >>> >> >> >>>> >>>>> >---------- Forwarded message --------- > >>> >> >> >>>> >>>>> >From: C Williams <cwilliams3320(a)gmail.com&gt; > >>> >> >> >>>> >>>>> >Date: Thu, Jun 18, 2020 at 4:01 PM > >>> >> >> >>>> >>>>> >Subject: Re: [ovirt-users] Fwd: Issues with > >Gluster > >>> >> >Domain > >>> >> >> >>>> >>>>> >To: Strahil Nikolov <hunter86_bg(a)yahoo.com&gt; > >>> >> >> >>>> >>>>> > > >>> >> >> >>>> >>>>> > > >>> >> >> >>>> >>>>> >Here is output from mount > >>> >> >> >>>> >>>>> > > >>> >> >> >>>> >>>>> >192.168.24.12:/stor/import0 on > >>> >> >> >>>> >>>>> >/rhev/data-center/mnt/192.168.24.12:_stor_import0 > >>> >> >> >>>> >>>>> >type nfs4 > >>> >> >> >>>> >>>>> > >>> >> >> >>>> >>>>> > >>> >> >> >>>> > >>> >> >> >>>> > >>> >> >> > >>> >> >> > >>> >> > >>> >> > >>> > >>> > > >>>>>>>>(rw,relatime,vers=4.1,rsize=1048576,wsize=1048576,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=192.168.24.18,local_lock=none,addr=192.168.24.12) > >>> >> >> >>>> >>>>> >192.168.24.13:/stor/import1 on > >>> >> >> >>>> >>>>> >/rhev/data-center/mnt/192.168.24.13:_stor_import1 > >>> >> >> >>>> >>>>> >type nfs4 > >>> >> >> >>>> >>>>> > >>> >> >> >>>> >>>>> > >>> >> >> >>>> > >>> >> >> >>>> > >>> >> >> > >>> >> >> > >>> >> > >>> >> > >>> > >>> > > >>>>>>>>(rw,relatime,vers=4.1,rsize=1048576,wsize=1048576,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=192.168.24.18,local_lock=none,addr=192.168.24.13) > >>> >> >> >>>> >>>>> >192.168.24.13:/stor/iso1 on > >>> >> >> >>>> >>>>> >/rhev/data-center/mnt/192.168.24.13:_stor_iso1 > >>> >> >> >>>> >>>>> >type nfs4 > >>> >> >> >>>> >>>>> > >>> >> >> >>>> >>>>> > >>> >> >> >>>> > >>> >> >> >>>> > >>> >> >> > >>> >> >> > >>> >> > >>> >> > >>> > >>> > > >>>>>>>>(rw,relatime,vers=4.1,rsize=1048576,wsize=1048576,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=192.168.24.18,local_lock=none,addr=192.168.24.13) > >>> >> >> >>>> >>>>> >192.168.24.13:/stor/export0 on > >>> >> >> >>>> >>>>> >/rhev/data-center/mnt/192.168.24.13:_stor_export0 > >>> >> >> >>>> >>>>> >type nfs4 > >>> >> >> >>>> >>>>> > >>> >> >> >>>> >>>>> > >>> >> >> >>>> > >>> >> >> >>>> > >>> >> >> > >>> >> >> > >>> >> > >>> >> > >>> > >>> > > >>>>>>>>(rw,relatime,vers=4.1,rsize=1048576,wsize=1048576,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=192.168.24.18,local_lock=none,addr=192.168.24.13) > >>> >> >> >>>> >>>>> >192.168.24.15:/images on > >>> >> >> >>>> >>>>> > >>/rhev/data-center/mnt/glusterSD/192.168.24.15:_images > >>> >> >> >>>> >>>>> >type fuse.glusterfs > >>> >> >> >>>> >>>>> > >>> >> >> >>>> >>>>> > >>> >> >> >>>> > >>> >> >> >>>> > >>> >> >> > >>> >> >> > >>> >> > >>> >> > >>> > >>> > > >>>>>>>>(rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072) > >>> >> >> >>>> >>>>> >192.168.24.18:/images3 on > >>> >> >> >>>> >>>>> > >>/rhev/data-center/mnt/glusterSD/192.168.24.18:_images3 > >>> >> >> >>>> >>>>> >type fuse.glusterfs > >>> >> >> >>>> >>>>> > >>> >> >> >>>> >>>>> > >>> >> >> >>>> > >>> >> >> >>>> > >>> >> >> > >>> >> >> > >>> >> > >>> >> > >>> > >>> > > >>>>>>>>(rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072) > >>> >> >> >>>> >>>>> >tmpfs on /run/user/0 type tmpfs > >>> >> >> >>>> >>>>> > >>> >> >>(rw,nosuid,nodev,relatime,seclabel,size=13198392k,mode=700) > >>> >> >> >>>> >>>>> >[root@ov06 glusterfs]# > >>> >> >> >>>> >>>>> > > >>> >> >> >>>> >>>>> >Also here is a screenshot of the console > >>> >> >> >>>> >>>>> > > >>> >> >> >>>> >>>>> >[image: image.png] > >>> >> >> >>>> >>>>> >The other domains are up > >>> >> >> >>>> >>>>> > > >>> >> >> >>>> >>>>> >Import0 and Import1 are NFS . GLCL0 is gluster. > >They > >>> >all > >>> >> >are > >>> >> >> >>>> >>>running > >>> >> >> >>>> >>>>> >VMs > >>> >> >> >>>> >>>>> > > >>> >> >> >>>> >>>>> >Thank You For Your Help ! > >>> >> >> >>>> >>>>> > > >>> >> >> >>>> >>>>> >On Thu, Jun 18, 2020 at 3:51 PM Strahil Nikolov > >>> >> >> >>>> &gt;&gt;&gt;&lt;hunter86_bg(a)yahoo.com&gt; > >>> >> >> >>>> >>>>> >wrote: > >>> >> >> >>>> >>>>> > > >>> >> >> >>>> >>>>> >> I don't see > >>> >> >> >'/rhev/data-center/mnt/192.168.24.13:_stor_import1' > >>> >> >> >>>> >>>>> >mounted > >>> >> >> >>>> >>>>> >> at all . > >>> >> >> >>>> >>>>> >> What is the status of all storage domains ? > >>> >> >> >>>> >>>>> >> > >>> >> >> >>>> >>>>> >> Best Regards, > >>> >> >> >>>> >>>>> >> Strahil Nikolov > >>> >> >> >>>> >>>>> >> > >>> >> >> >>>> >>>>> >> На 18 юни 2020 г. 21:43:44 GMT+03:00, C Williams > >>> >> >> >>>> >>>>> &gt;&lt;cwilliams3320(a)gmail.com&gt; > >>> >> >> >>>> >>>>> >> написа: > >>> >> >> >>>> >>>>> >> > Resending to deal with possible email issues > >>> >> >> >>>> >>>>> >> > > >>> >> >> >>>> >>>>> >> >---------- Forwarded message --------- > >>> >> >> >>>> >>>>> >> >From: C Williams <cwilliams3320(a)gmail.com&gt; > >>> >> >> >>>> >>>>> >> >Date: Thu, Jun 18, 2020 at 2:07 PM > >>> >> >> >>>> >>>>> >> >Subject: Re: [ovirt-users] Issues with Gluster > >>> >Domain > >>> >> >> >>>> >>>>> >> >To: Strahil Nikolov <hunter86_bg(a)yahoo.com&gt; > >>> >> >> >>>> >>>>> >> > > >>> >> >> >>>> >>>>> >> > > >>> >> >> >>>> >>>>> >> >More > >>> >> >> >>>> >>>>> >> > > >>> >> >> >>>> >>>>> >> >[root@ov06 ~]# for i in $(gluster volume list); > > do > >>> >> >echo > >>> >> >> >>>> >>>$i;echo; > >>> >> >> >>>> >>>>> >> >gluster > >>> >> >> >>>> >>>>> >> >volume info $i; echo;echo;gluster volume status > >>> >> >> >>>> >>>>> >$i;echo;echo;echo;done > >>> >> >> >>>> >>>>> >> >images3 > >>> >> >> >>>> >>>>> >> > > >>> >> >> >>>> >>>>> >> > > >>> >> >> >>>> >>>>> >> >Volume Name: images3 > >>> >> >> >>>> >>>>> >> >Type: Replicate > >>> >> >> >>>> >>>>> >> >Volume ID: 0243d439-1b29-47d0-ab39-d61c2f15ae8b > >>> >> >> >>>> >>>>> >> >Status: Started > >>> >> >> >>>> >>>>> >> >Snapshot Count: 0 > >>> >> >> >>>> >>>>> >> >Number of Bricks: 1 x 3 = 3 > >>> >> >> >>>> >>>>> >> >Transport-type: tcp > >>> >> >> >>>> >>>>> >> >Bricks: > >>> >> >> >>>> >>>>> >> >Brick1: 192.168.24.18:/bricks/brick04/images3 > >>> >> >> >>>> >>>>> >> >Brick2: 192.168.24.19:/bricks/brick05/images3 > >>> >> >> >>>> >>>>> >> >Brick3: 192.168.24.20:/bricks/brick06/images3 > >>> >> >> >>>> >>>>> >> >Options Reconfigured: > >>> >> >> >>>> >>>>> >> >performance.client-io-threads: on > >>> >> >> >>>> >>>>> >> >nfs.disable: on > >>> >> >> >>>> >>>>> >> >transport.address-family: inet > >>> >> >> >>>> >>>>> >> >user.cifs: off > >>> >> >> >>>> >>>>> >> >auth.allow: * > >>> >> >> >>>> >>>>> >> >performance.quick-read: off > >>> >> >> >>>> >>>>> >> >performance.read-ahead: off > >>> >> >> >>>> >>>>> >> >performance.io-cache: off > >>> >> >> >>>> >>>>> >> >performance.low-prio-threads: 32 > >>> >> >> >>>> >>>>> >> >network.remote-dio: off > >>> >> >> >>>> >>>>> >> >cluster.eager-lock: enable > >>> >> >> >>>> >>>>> >> >cluster.quorum-type: auto > >>> >> >> >>>> >>>>> >> >cluster.server-quorum-type: server > >>> >> >> >>>> >>>>> >> >cluster.data-self-heal-algorithm: full > >>> >> >> >>>> >>>>> >> >cluster.locking-scheme: granular > >>> >> >> >>>> >>>>> >> >cluster.shd-max-threads: 8 > >>> >> >> >>>> >>>>> >> >cluster.shd-wait-qlength: 10000 > >>> >> >> >>>> >>>>> >> >features.shard: on > >>> >> >> >>>> >>>>> >> >cluster.choose-local: off > >>> >> >> >>>> >>>>> >> >client.event-threads: 4 > >>> >> >> >>>> >>>>> >> >server.event-threads: 4 > >>> >> >> >>>> >>>>> >> >storage.owner-uid: 36 > >>> >> >> >>>> >>>>> >> >storage.owner-gid: 36 > >>> >> >> >>>> >>>>> >> >performance.strict-o-direct: on > >>> >> >> >>>> >>>>> >> >network.ping-timeout: 30 > >>> >> >> >>>> >>>>> >> >cluster.granular-entry-heal: enable > >>> >> >> >>>> >>>>> >> > > >>> >> >> >>>> >>>>> >> > > >>> >> >> >>>> >>>>> >> >Status of volume: images3 > >>> >> >> >>>> >>>>> >> >Gluster process TCP > >>> >Port > >>> >> >> >RDMA Port > >>> >> >> >>>> >>>>> >Online > >>> >> >> >>>> >>>>> >> > Pid > >>> >> >> >>>> >>>>> >> > >>> >> >> >>>> >>>>> >> > >>> >> >> >>>> >>>>> > >>> >> >> >>>> >>>>> > >>> >> >> >>>> > >>> >> >> >>>> > >>> >> >> > >>> >> >> > >>> >> > >>> >> > >>> > >>> > > >>>>>>>>>------------------------------------------------------------------------------ > >>> >> >> >>>> >>>>> >> >Brick 192.168.24.18:/bricks/brick04/images3 > >49152 > >>> >> >0 > >>> >> >> >>>> > >>> >> >> >>>> >>>Y > >>> >> >> >>>> >>>>> >> >6666 > >>> >> >> >>>> >>>>> >> >Brick 192.168.24.19:/bricks/brick05/images3 > >49152 > >>> >> >0 > >>> >> >> >>>> > >>> >> >> >>>> >>>Y > >>> >> >> >>>> >>>>> >> >6779 > >>> >> >> >>>> >>>>> >> >Brick 192.168.24.20:/bricks/brick06/images3 > >49152 > >>> >> >0 > >>> >> >> >>>> > >>> >> >> >>>> >>>Y > >>> >> >> >>>> >>>>> >> >7227 > >>> >> >> >>>> >>>>> >> >Self-heal Daemon on localhost N/A > >>> >> >N/A > >>> >> >> >>>> > >>> >> >> >>>> >>>Y > >>> >> >> >>>> >>>>> >> >6689 > >>> >> >> >>>> >>>>> >> >Self-heal Daemon on ov07.ntc.srcle.com N/A > >>> >> >N/A > >>> >> >> >>>> > >>> >> >> >>>> >>>Y > >>> >> >> >>>> >>>>> >> >6802 > >>> >> >> >>>> >>>>> >> >Self-heal Daemon on ov08.ntc.srcle.com N/A > >>> >> >N/A > >>> >> >> >>>> > >>> >> >> >>>> >>>Y > >>> >> >> >>>> >>>>> >> >7250 > >>> >> >> >>>> >>>>> >> > > >>> >> >> >>>> >>>>> >> >Task Status of Volume images3 > >>> >> >> >>>> >>>>> >> > >>> >> >> >>>> >>>>> >> > >>> >> >> >>>> >>>>> > >>> >> >> >>>> >>>>> > >>> >> >> >>>> > >>> >> >> >>>> > >>> >> >> > >>> >> >> > >>> >> > >>> >> > >>> > >>> > > >>>>>>>>>------------------------------------------------------------------------------ > >>> >> >> >>>> >>>>> >> >There are no active volume tasks > >>> >> >> >>>> >>>>> >> > > >>> >> >> >>>> >>>>> >> > > >>> >> >> >>>> >>>>> >> > > >>> >> >> >>>> >>>>> >> > > >>> >> >> >>>> >>>>> >> >[root@ov06 ~]# ls -l > >>> >/rhev/data-center/mnt/glusterSD/ > >>> >> >> >>>> >>>>> >> >total 16 > >>> >> >> >>>> >>>>> >> >drwxr-xr-x. 5 vdsm kvm 8192 Jun 18 14:04 > >>> >> >> >192.168.24.15:_images > >>> >> >> >>>> >>>>> >> >drwxr-xr-x. 5 vdsm kvm 8192 Jun 18 14:05 > >>> >> >192.168.24.18: > >>> >> >> >>>> _images3 > >>> >> >> >>>> >>>>> >> >[root@ov06 ~]# > >>> >> >> >>>> >>>>> >> > > >>> >> >> >>>> >>>>> >> >On Thu, Jun 18, 2020 at 2:03 PM C Williams > >>> >> >> >>>> &gt;&gt;&gt;&lt;cwilliams3320(a)gmail.com&gt; > >>> >> >> >>>> >>>>> >> >wrote: > >>> >> >> >>>> >>>>> >> > > >>> >> >> >>>> >>>>> >> >> Strahil, > >>> >> >> >>>> >>>>> >> >> > >>> >> >> >>>> >>>>> >> >> Here you go -- Thank You For Your Help ! > >>> >> >> >>>> >>>>> >> >> > >>> >> >> >>>> >>>>> >> >> BTW -- I can write a test file to gluster and > >it > >>> >> >> >replicates > >>> >> >> >>>> >>>>> >properly. > >>> >> >> >>>> >>>>> >> >> Thinking something about the oVirt Storage > >Domain > >>> >? > >>> >> >> >>>> >>>>> >> >> > >>> >> >> >>>> >>>>> >> >> [root@ov08 ~]# gluster pool list > >>> >> >> >>>> >>>>> >> >> UUID > >Hostname > >>> >> >> >>>> >>>>> >State > >>> >> >> >>>> >>>>> >> >> 5b40c659-d9ab-43c3-9af8-18b074ea0b83 ov06 > >>> >> >> >>>> >>>>> >> >Connected > >>> >> >> >>>> >>>>> >> >> 36ce5a00-6f65-4926-8438-696944ebadb5 > >>> >> >> >ov07.ntc.srcle.com > >>> >> >> >>>> >>>>> >> >Connected > >>> >> >> >>>> >>>>> >> >> c7e7abdb-a8f4-4842-924c-e227f0db1b29 > >localhost > >>> >> >> >>>> >>>>> >> >Connected > >>> >> >> >>>> >>>>> >> >> [root@ov08 ~]# gluster volume list > >>> >> >> >>>> >>>>> >> >> images3 > >>> >> >> >>>> >>>>> >> >> > >>> >> >> >>>> >>>>> >> >> On Thu, Jun 18, 2020 at 1:13 PM Strahil > >Nikolov > >>> >> >> >>>> >>>>> >> &gt;&lt;hunter86_bg(a)yahoo.com&gt; > >>> >> >> >>>> >>>>> >> >> wrote: > >>> >> >> >>>> >>>>> >> >> > >>> >> >> >>>> >>>>> >> >>> Log to the oVirt cluster and provide the > >output > >>> >of: > >>> >> >> >>>> >>>>> >> >>> gluster pool list > >>> >> >> >>>> >>>>> >> >>> gluster volume list > >>> >> >> >>>> >>>>> >> >>> for i in $(gluster volume list); do echo > >>> >$i;echo; > >>> >> >> >gluster > >>> >> >> >>>> >>>>> >volume > >>> >> >> >>>> >>>>> >> >info > >>> >> >> >>>> >>>>> >> >>> $i; echo;echo;gluster volume status > >>> >> >> >$i;echo;echo;echo;done > >>> >> >> >>>> >>>>> >> >>> > >>> >> >> >>>> >>>>> >> >>> ls -l /rhev/data-center/mnt/glusterSD/ > >>> >> >> >>>> >>>>> >> >>> > >>> >> >> >>>> >>>>> >> >>> Best Regards, > >>> >> >> >>>> >>>>> >> >>> Strahil Nikolov > >>> >> >> >>>> >>>>> >> >>> > >>> >> >> >>>> >>>>> >> >>> > >>> >> >> >>>> >>>>> >> >>> На 18 юни 2020 г. 19:17:46 GMT+03:00, C > >Williams > >>> >> >> >>>> >>>>> >> &gt;&lt;cwilliams3320(a)gmail.com&gt; > >>> >> >> >>>> >>>>> >> >>> написа: > >>> >> >> >>>> >>>>> >> >>> >Hello, > >>> >> >> >>>> >>>>> >> >>> > > >>> >> >> >>>> >>>>> >> >>> >I recently added 6 hosts to an existing > >oVirt > >>> >> >> >>>> >>>compute/gluster > >>> >> >> >>>> >>>>> >> >cluster. > >>> >> >> >>>> >>>>> >> >>> > > >>> >> >> >>>> >>>>> >> >>> >Prior to this attempted addition, my > >cluster > >>> >had 3 > >>> >> >> >>>> >>>Hypervisor > >>> >> >> >>>> >>>>> >hosts > >>> >> >> >>>> >>>>> >> >and > >>> >> >> >>>> >>>>> >> >>> >3 > >>> >> >> >>>> >>>>> >> >>> >gluster bricks which made up a single > >gluster > >>> >> >volume > >>> >> >> >>>> >>>(replica 3 > >>> >> >> >>>> >>>>> >> >volume) > >>> >> >> >>>> >>>>> >> >>> >. I > >>> >> >> >>>> >>>>> >> >>> >added the additional hosts and made a brick > >on > >>> >3 > >>> >> >of > >>> >> >> >the new > >>> >> >> >>>> >>>>> >hosts > >>> >> >> >>>> >>>>> >> >and > >>> >> >> >>>> >>>>> >> >>> >attempted to make a new replica 3 volume. I > >had > >>> >> >> >difficulty > >>> >> >> >>>> >>>>> >> >creating > >>> >> >> >>>> >>>>> >> >>> >the > >>> >> >> >>>> >>>>> >> >>> >new volume. So, I decided that I would make > >a > >>> >new > >>> >> >> >>>> >>>>> >compute/gluster > >>> >> >> >>>> >>>>> >> >>> >cluster > >>> >> >> >>>> >>>>> >> >>> >for each set of 3 new hosts. > >>> >> >> >>>> >>>>> >> >>> > > >>> >> >> >>>> >>>>> >> >>> >I removed the 6 new hosts from the existing > >>> >oVirt > >>> >> >> >>>> >>>>> >Compute/Gluster > >>> >> >> >>>> >>>>> >> >>> >Cluster > >>> >> >> >>>> >>>>> >> >>> >leaving the 3 original hosts in place with > >>> >their > >>> >> >> >bricks. At > >>> >> >> >>>> >>>that > >>> >> >> >>>> >>>>> >> >point > >>> >> >> >>>> >>>>> >> >>> >my > >>> >> >> >>>> >>>>> >> >>> >original bricks went down and came back up > >. > >>> >The > >>> >> >> >volume > >>> >> >> >>>> >>>showed > >>> >> >> >>>> >>>>> >> >entries > >>> >> >> >>>> >>>>> >> >>> >that > >>> >> >> >>>> >>>>> >> >>> >needed healing. At that point I ran gluster > >>> >volume > >>> >> >> >heal > >>> >> >> >>>> >>>images3 > >>> >> >> >>>> >>>>> >> >full, > >>> >> >> >>>> >>>>> >> >>> >etc. > >>> >> >> >>>> >>>>> >> >>> >The volume shows no unhealed entries. I > >also > >>> >> >> >corrected some > >>> >> >> >>>> >>>peer > >>> >> >> >>>> >>>>> >> >>> >errors. > >>> >> >> >>>> >>>>> >> >>> > > >>> >> >> >>>> >>>>> >> >>> >However, I am unable to copy disks, move > >disks > >>> >to > >>> >> >> >another > >>> >> >> >>>> >>>>> >domain, > >>> >> >> >>>> >>>>> >> >>> >export > >>> >> >> >>>> >>>>> >> >>> >disks, etc. It appears that the engine > >cannot > >>> >> >locate > >>> >> >> >disks > >>> >> >> >>>> >>>>> >properly > >>> >> >> >>>> >>>>> >> >and > >>> >> >> >>>> >>>>> >> >>> >I > >>> >> >> >>>> >>>>> >> >>> >get storage I/O errors. > >>> >> >> >>>> >>>>> >> >>> > > >>> >> >> >>>> >>>>> >> >>> >I have detached and removed the oVirt > >Storage > >>> >> >Domain. > >>> >> >> >I > >>> >> >> >>>> >>>>> >reimported > >>> >> >> >>>> >>>>> >> >the > >>> >> >> >>>> >>>>> >> >>> >domain and imported 2 VMs, But the VM disks > >>> >> >exhibit > >>> >> >> >the > >>> >> >> >>>> same > >>> >> >> >>>> >>>>> >> >behaviour > >>> >> >> >>>> >>>>> >> >>> >and > >>> >> >> >>>> >>>>> >> >>> >won't run from the hard disk. > >>> >> >> >>>> >>>>> >> >>> > > >>> >> >> >>>> >>>>> >> >>> > > >>> >> >> >>>> >>>>> >> >>> >I get errors such as this > >>> >> >> >>>> >>>>> >> >>> > > >>> >> >> >>>> >>>>> >> >>> >VDSM ov05 command HSMGetAllTasksStatusesVDS > >>> >> >failed: > >>> >> >> >low > >>> >> >> >>>> >>>level > >>> >> >> >>>> >>>>> >Image > >>> >> >> >>>> >>>>> >> >>> >copy > >>> >> >> >>>> >>>>> >> >>> >failed: ("Command ['/usr/bin/qemu-img', > >>> >'convert', > >>> >> >> >'-p', > >>> >> >> >>>> >>>'-t', > >>> >> >> >>>> >>>>> >> >'none', > >>> >> >> >>>> >>>>> >> >>> >'-T', 'none', '-f', 'raw', > >>> >> >> >>>> >>>>> >> >>> > >>> >>u'/rhev/data-center/mnt/glusterSD/192.168.24.18: > >>> >> >> >>>> >>>>> >> >>> > >>> >> >> >>>> >>>>> >> > >>> >> >> >>>> >>>>> >> > >>> >> >> >>>> >>>>> > >>> >> >> >>>> >>>>> > >>> >> >> >>>> > >>> >> >> >>>> > >>> >> >> > >>> >> >> > >>> >> > >>> >> > >>> > >>> > > >>>>>>>>>_images3/5fe3ad3f-2d21-404c-832e-4dc7318ca10d/images/3ea5afbd-0fe0-4c09-8d39-e556c66a8b3d/fe6eab63-3b22-4815-bfe6-4a0ade292510', > >>> >> >> >>>> >>>>> >> >>> >'-O', 'raw', > >>> >> >> >>>> >>>>> >> >>> >u'/rhev/data-center/mnt/192.168.24.13: > >>> >> >> >>>> >>>>> >> >>> > >>> >> >> >>>> >>>>> >> > >>> >> >> >>>> >>>>> >> > >>> >> >> >>>> >>>>> > >>> >> >> >>>> >>>>> > >>> >> >> >>>> > >>> >> >> >>>> > >>> >> >> > >>> >> >> > >>> >> > >>> >> > >>> > >>> > > >>>>>>>>>_stor_import1/1ab89386-a2ba-448b-90ab-bc816f55a328/images/f707a218-9db7-4e23-8bbd-9b12972012b6/d6591ec5-3ede-443d-bd40-93119ca7c7d5'] > >>> >> >> >>>> >>>>> >> >>> >failed with rc=1 out='' > >>> >err=bytearray(b'qemu-img: > >>> >> >> >error > >>> >> >> >>>> >>>while > >>> >> >> >>>> >>>>> >> >reading > >>> >> >> >>>> >>>>> >> >>> >sector 135168: Transport endpoint is not > >>> >> >> >>>> >>>connected\\nqemu-img: > >>> >> >> >>>> >>>>> >> >error > >>> >> >> >>>> >>>>> >> >>> >while > >>> >> >> >>>> >>>>> >> >>> >reading sector 131072: Transport endpoint > >is > >>> >not > >>> >> >> >>>> >>>>> >> >connected\\nqemu-img: > >>> >> >> >>>> >>>>> >> >>> >error while reading sector 139264: > >Transport > >>> >> >endpoint > >>> >> >> >is > >>> >> >> >>>> not > >>> >> >> >>>> >>>>> >> >>> >connected\\nqemu-img: error while reading > >>> >sector > >>> >> >> >143360: > >>> >> >> >>>> >>>>> >Transport > >>> >> >> >>>> >>>>> >> >>> >endpoint > >>> >> >> >>>> >>>>> >> >>> >is not connected\\nqemu-img: error while > >>> >reading > >>> >> >> >sector > >>> >> >> >>>> >>>147456: > >>> >> >> >>>> >>>>> >> >>> >Transport > >>> >> >> >>>> >>>>> >> >>> >endpoint is not connected\\nqemu-img: error > >>> >while > >>> >> >> >reading > >>> >> >> >>>> >>>sector > >>> >> >> >>>> >>>>> >> >>> >155648: > >>> >> >> >>>> >>>>> >> >>> >Transport endpoint is not > >connected\\nqemu-img: > >>> >> >error > >>> >> >> >while > >>> >> >> >>>> >>>>> >reading > >>> >> >> >>>> >>>>> >> >>> >sector > >>> >> >> >>>> >>>>> >> >>> >151552: Transport endpoint is not > >>> >> >> >connected\\nqemu-img: > >>> >> >> >>>> >>>error > >>> >> >> >>>> >>>>> >while > >>> >> >> >>>> >>>>> >> >>> >reading > >>> >> >> >>>> >>>>> >> >>> >sector 159744: Transport endpoint is not > >>> >> >> >connected\\n')",) > >>> >> >> >>>> >>>>> >> >>> > > >>> >> >> >>>> >>>>> >> >>> >oVirt version is 4.3.82-1.el7 > >>> >> >> >>>> >>>>> >> >>> >OS CentOS Linux release 7.7.1908 (Core) > >>> >> >> >>>> >>>>> >> >>> > > >>> >> >> >>>> >>>>> >> >>> >The Gluster Cluster has been working very > >well > >>> >> >until > >>> >> >> >this > >>> >> >> >>>> >>>>> >incident. > >>> >> >> >>>> >>>>> >> >>> > > >>> >> >> >>>> >>>>> >> >>> >Please help. > >>> >> >> >>>> >>>>> >> >>> > > >>> >> >> >>>> >>>>> >> >>> >Thank You > >>> >> >> >>>> >>>>> >> >>> > > >>> >> >> >>>> >>>>> >> >>> >Charles Williams > >>> >> >> >>>> >>>>> >> >>> > >>> >> >> >>>> >>>>> >> >> > >>> >> >> >>>> >>>>> >> > >>> >> >> >>>> >>>>> > >>> >> >> >>>> >>>> > >>> >> >> >>>> >> > >>> >> >> >>>> > > >>> >> >> >>>> _______________________________________________ > >>> >> >> >>>> Users mailing list -- users(a)ovirt.org > >>> >> >> >>>> To unsubscribe send an email to users-leave(a)ovirt.org > >>> >> >> >>>> Privacy Statement: > >https://www.ovirt.org/privacy-policy.html > >>> >> >> >>>> oVirt Code of Conduct: > >>> >> >> >>>> > >https://www.ovirt.org/community/about/community-guidelines/ > >>> >> >> >>>> List Archives: > >>> >> >> >>>> > >>> >> >> > > >>> >> >> > >>> >> > > >>> >> > >>> > > >>> > > >

> >>> >> >> >>>> > >>> >> >> >>> > >>> >> >> > >>> >> > >>> > >> >