Well, we also disconnected the ilo NIC cable. We did another test, and just disconnected the NIC cables but the ilo NIC cable, and voilá the HA took about 3 minutes to migrate the VM to the other host. We notice too that the manager did a reboot to the failed host. For a more real scenario we disconnected the power cable from the host and after about 2 or 3 minutes the manager put the host in non-responsive and the VM in unknown state. Is this the correct behavior? Regards Jose ----- Mensagem original ----- De: "Gianluca Cecchi" <gianluca.cecchi@gmail.com> Para: suporte@logicworks.pt Cc: "René Koch (ovido)" <r.koch@ovido.at>, "users" <Users@ovirt.org> Enviadas: Terça-feira, 16 Abril, 2013 12:12:43 Assunto: Re: [Users] High Availability On Tue, Apr 16, 2013 at 12:56 PM, suporte wrote:
Hi,
We have 2 Fujitsu servers and one iSCSI storage domain. The servers have the power management configured with ilo3. We can live migrate a VM and when rebooting the host of that VM it does the migration to the other host.
For testing high availability we disconnected all NIC cables of the VM host, the VM does not migrate to the other host, we had to manually confirm the host has been rebooted, and than migration happens.
Is this the correct behavior? We have to manually confirm that the host has been rebooted for HA happens?
Regards Jose
Hello, when you say "we disconnected all NIC cables" you mean "we disconnected all NIC cables but the ones connected to the iLO interface", correct? Because to know that one host has successfully fenced the problematic one, it has to send a get status message and see that it is off or that it has been successfully rebooted..... For esxample in RHCS if you configure iLO as a fencing device it remains indefinitely in state similar to wait for fence to complete if the "fencer" is not able to get an acknowledge about the operation or to reach the other node iLO. Probably you can find something in your logs... Gianluca