Hi Garry, I hope I understand your case here, the terminology is a little "different". Adding the hosted-engine to the gluster network is an interesting approach I tried. It works to an extent but will have issues with quorum (depending on your setup). Anyway try this: # Generate random UUID and MAC Address - or create your own by hand.. yum -y install python-virtinst echo 'import virtinst.util ; print virtinst.util.uuidToString(virtinst.util.randomUUID())' | python echo 'import virtinst.util ; print virtinst.util.randomMAC()' | python hosted-engine --set-maintenance --mode=global # On all installed hosts nano /etc/ovirt-hosted-engine/vm.conf # insert under earlier nicModel # replace macaddress and uuid from above # increment slot devices={nicModel:pv,macAddr:00:16:3e:j1:4b:22,linkActive:true,network:storage_network,filter:vdsm-no-mac-spoofing,specParams:{},deviceId:fds24208-a234-z123-6053-32c9c0361f96,address:{bus:0x00,slot:0x04, domain:0x0000, type:pci,function:0x0},device:bridge,type:interface} hosted-engine --vm-shutdown hosted-engine --vm-start hosted-engine --set-maintenance --mode=none Now your hosted-engine VM should come up with another NIC, this'll work for modifying your existing hosts. But I'm not sure how to apply this to the answers file if you were to add a new host to the configuration. HTH On Tue, Apr 29, 2014 at 6:08 PM, Garry Tiedemann <garrytiedemann@networkvideo.com.au> wrote:
Hi guys,
I built my hosted-engine with three nodes (3.4, CentOS), and built a Gluster ISO domain, connected it up, all good.
Until I come to engine-iso-uploader, it is present on the hosted-engine but not on the VMs. And my gluster subnet is not routed. So the VM can't see it to upload ISOs into.
How are other people getting around this?
I can see: 1. Obvious - make the Gluster LAN routed. It wouldn't hurt, just for transferring a few ISOs. 2. Add a second NIC to the hosted-engine VM, so that it can see the gluster LAN 3. put engine-iso-uploader on one of the nodes, is that possible?
My preference is to connect hosted-engine to the Gluster LAN.
Is it possible to add another NIC to the VM, after it's built? (I don't want to rebuild if avoidable; I've done that enough times). I know that the ovirt GUI isn't aware of the first NIC on the VM, so I haven't dared to try adding a NIC there. Is that safe?
Thanks in advance for your thoughts on this.
cheers,
Garry
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users