Re: [ovirt-users] hosted-engine cant access engine appliance

Hello, i tried to deploy hosted-engine on a testing environment. First of all i tried to deploy with the option "Automatically execute engine-setup on the engine appliance on first boot (Yes, No)[Yes]? Yes" but it got stuck. [ INFO ] Running engine-setup on the appliance [ ERROR ] Engine setup got stuck on the appliance [ ERROR ] Failed to execute stage 'Closing up': Engine setup is stalled on the appliance since 600 seconds ago. Please check its log on the appliance. [ INFO ] Stage: Clean up [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine- setup/answers/answers-20161104112913.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Hosted Engine deployment failed: this system is not reliable, please check the issue,fix and redeploy Log file is located at /var/log/ovirt-hosted-engine-s etup/ovirt-hosted-engine-setup-20161104110104-kyhq1e.log Next try i said 'No' and i tried to execute it myself. But i can't access the engine appliance. [nolden@oVirtNode01 ~]$ sudo hosted-engine --console /usr/share/vdsm/vdsClient.py:33: DeprecationWarning: vdscli uses xmlrpc. since ovirt 3.6 xmlrpc is deprecated, please use vdsm.jsonrpcvdscli from vdsm import utils, vdscli, constants The engine VM is running on this host Verbunden mit der Domain: HostedEngine Escape-Zeichen ist ^] Fehler: Interner Fehler: Charakter-Einheit console0 verwendet nicht ein PTY Additionally i can't ping or access the engine appliance via ssh. Did i forget to install a packege or configure something? Below my infrastructure and configs. Attached the log file. Thanks for help. My infrastructure is a nestedVM system: All systems have nested visualization activated HW with LinuxMint x86_64; - VM with CentOS-7-x86_64; 24GB Ram; 7 cores; - Nested VM with CentOS-7-x86_64; 12288GB Ram; 4 cores; Hostname: oVirtNode01.com (192.168.122.101): Here i deploy hosted-engine, Hostname: oVirtEngine.com (192.168.122.201) - Nested VM with CentOS-7-x86_64; 4096GB Ram; 1 cores; Hostname: oVirtNode02.com (192.168.122.102): - Nested VM with CentOS-7-x86_64; 4096GB Ram; 1 cores; Hostname: oVirtNode03.com (192.168.122.103): All three NestedVMs are updated, have installed the ovirt-release40.rpm. Additional installed: screen (4.1.0), ovirt-hosted-engine-setup (2.0.2.2), vdsm-gluster (4.18.13), bridge-utils (1.5), vdsm (4.18.13), vdsm-cli (4.18.13), glusterfs-server (3.7.16), samba. First NestedVM additional installed ovirt-engine-appliance 4.0-20160928.1.el7.centos The three VMs building a glusterfs volume "engine" 3 replica, with the options... Volume Name: engine Type: Replicate Volume ID: e92849b7-af3b-4ccd-bd0d-69a5ab3b6214 Status: Started Number of Bricks: 1 x 3 = 3 Transport-type: tcp Bricks: Brick1: oVirtNode01.com:/gluster/engine/brick1 Brick2: oVirtNode02.com:/gluster/engine/brick1 Brick3: oVirtNode03.com:/gluster/engine/brick1 Options Reconfigured: auth.allow: 192.168.122.* storage.owner-gid: 36 storage.owner-uid: 36 performance.readdir-ahead: on ## Session 1 (hosted-engine deploy without automatically execute engine-setup) [nolden@oVirtNode01 ~]$ sudo hosted-engine --deploy /usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/storage_backends.py:15: DeprecationWarning: vdscli uses xmlrpc. since ovirt 3.6 xmlrpc is deprecated, please use vdsm.jsonrpcvdscli import vdsm.vdscli [ INFO ] Stage: Initializing [ INFO ] Generating a temporary VNC password. [ INFO ] Stage: Environment setup During customization use CTRL-D to abort. Continuing will configure this host for serving as hypervisor and create a VM where you have to install the engine afterwards. Are you sure you want to continue? (Yes, No)[Yes]: [ INFO ] Hardware supports virtualization Configuration files: [] Log file: /var/log/ovirt-hosted-engine-s etup/ovirt-hosted-engine-setup-20161104123834-chwikf.log Version: otopi-1.5.2 (otopi-1.5.2-1.el7.centos) [ INFO ] Stage: Environment packages setup [ INFO ] Stage: Programs detection [ INFO ] Stage: Environment setup [ INFO ] Generating libvirt-spice certificates [ INFO ] Stage: Environment customization --== STORAGE CONFIGURATION ==-- Please specify the storage you would like to use (glusterfs, iscsi, fc, nfs3, nfs4)[nfs3]: glusterfs [ INFO ] Please note that Replica 3 support is required for the shared storage. Please specify the full shared storage connection path to use (example: host:/path): oVirtNode01.com:/engine [ INFO ] GlusterFS replica 3 Volume detected [ INFO ] Installing on first host [ INFO ] GlusterFS replica 3 Volume detected --== SYSTEM CONFIGURATION ==-- --== NETWORK CONFIGURATION ==-- iptables was detected on your computer, do you wish setup to configure it? (Yes, No)[Yes]: No Please indicate a pingable gateway IP address [192.168.122.1]: Please indicate a nic to set ovirtmgmt bridge on: (eth0) [eth0]: --== VM CONFIGURATION ==-- Booting from cdrom on RHEL7 is ISO image based only, as cdrom passthrough is disabled (BZ760885) Please specify the device to boot the VM from (choose disk for the oVirt engine appliance) (cdrom, disk, pxe) [disk]: Please specify the console type you would like to use to connect to the VM (vnc, spice) [vnc]: [ INFO ] Detecting available oVirt engine appliances The following appliance have been found on your system: [1] - The oVirt Engine Appliance image (OVA) - 4.0-20160928.1.el7.centos [2] - Directly select an OVA file Please select an appliance (1, 2) [1]: [ INFO ] Verifying its sha1sum [ INFO ] Checking OVF archive content (could take a few minutes depending on archive size) [ INFO ] Checking OVF XML content (could take a few minutes depending on archive size) [WARNING] OVF does not contain a valid image description, using default. Would you like to use cloud-init to customize the appliance on the first boot (Yes, No)[Yes]? Would you like to generate on-fly a cloud-init ISO image (of no-cloud type) or do you have an existing one (Generate, Existing)[Generate]? Please provide the FQDN you would like to use for the engine appliance. Note: This will be the FQDN of the engine VM you are now going to launch, it should not point to the base host or to any other existing machine. Engine VM FQDN: (leave it empty to skip): []: oVirtEngine.com Automatically execute engine-setup on the engine appliance on first boot (Yes, No)[Yes]? No Please provide the domain name you would like to use for the engine appliance. Engine VM domain: [com] Enter root password that will be used for the engine appliance (leave it empty to skip): Confirm appliance root password: The following CPU types are supported by this host: - model_SandyBridge: Intel SandyBridge Family - model_Westmere: Intel Westmere Family - model_Nehalem: Intel Nehalem Family - model_Penryn: Intel Penryn Family - model_Conroe: Intel Conroe Family Please specify the CPU type to be used by the VM [model_SandyBridge]: Please specify the number of virtual CPUs for the VM (Defaults to appliance OVF value): [4]: 3 [WARNING] Minimum requirements for disk size not met You may specify a unicast MAC address for the VM or accept a randomly generated default [00:16:3e:2a:82:17]: Please specify the memory size of the VM in MB (Defaults to maximum available): [10880]: 8144 How should the engine VM network be configured (DHCP, Static)[DHCP]? Static Please enter the IP address to be used for the engine VM [192.168.122.2]: 192.168.122.201 [ INFO ] The engine VM will be configured to use 192.168.122.201/24 Please provide a comma-separated list (max 3) of IP addresses of domain name servers for the engine VM Engine VM DNS (leave it empty to skip) [192.168.122.1]: Add lines for the appliance itself and for this host to /etc/hosts on the engine VM? Note: ensuring that this host could resolve the engine VM hostname is still up to you (Yes, No)[No] Yes --== HOSTED ENGINE CONFIGURATION ==-- Enter engine admin password: Confirm engine admin password: Enter the name which will be used to identify this host inside the Administrator Portal [hosted_engine_1]: Please provide the name of the SMTP server through which we will send notifications [localhost]: Please provide the TCP port number of the SMTP server [25]: Please provide the email address from which notifications will be sent [root@localhost]: Please provide a comma-separated list of email addresses which will get notifications [root@localhost]: [ INFO ] Stage: Setup validation --== CONFIGURATION PREVIEW ==-- Bridge interface : eth0 Engine FQDN : oVirtEngine.com Bridge name : ovirtmgmt Host address : oVirtNode01 SSH daemon port : 22 Gateway address : 192.168.122.1 Host name for web application : hosted_engine_1 Storage Domain type : glusterfs Host ID : 1 Image size GB : 10 Storage connection : oVirtNode01.com:/engine Console type : vnc Memory size MB : 8144 MAC address : 00:16:3e:2a:82:17 Boot type : disk Number of CPUs : 3 OVF archive (for disk boot) : /usr/share/ovirt-engine-appliance/ovirt-engine-appliance-4. 0-20160928.1.el7.centos.ova Appliance version : 4.0-20160928.1.el7.centos CPU Type : model_SandyBridge Please confirm installation settings (Yes, No)[Yes]: [ INFO ] Stage: Transaction setup ... [ INFO ] Stage: Closing up The following network ports should be opened: tcp:5900 tcp:5901 tcp:9090 udp:5900 udp:5901 An example of the required configuration for iptables can be found at: /etc/ovirt-hosted-engine/iptables.example In order to configure firewalld, copy the files from /etc/ovirt-hosted-engine/firewalld to /etc/firewalld/services and execute the following commands: firewall-cmd -service hosted-cockpit firewall-cmd -service hosted-console [ INFO ] Creating VM You can now connect to the VM with the following command: hosted-engine --console You can also graphically connect to the VM from your system with the following command: remote-viewer vnc://oVirtNode01:5900 Use temporary password "2263CpET" to connect to vnc console. Please ensure that your Guest OS is properly configured to support serial console according to your distro documentation. Follow http://www.ovirt.org/Serial_Co nsole_Setup#I_need_to_access_the_console_the_old_way for more info. If you need to reboot the VM you will need to start it manually using the command: hosted-engine --vm-start You can then set a temporary password using the command: hosted-engine --add-console-password Please install and setup the engine in the VM. You may also be interested in installing ovirt-guest-agent-common package in the VM. The VM has been rebooted. To continue please install oVirt-Engine in the VM (Follow http://www.ovirt.org/Quick_Start_Guide for more info). Make a selection from the options below: (1) Continue setup - oVirt-Engine installation is ready and ovirt-engine service is up (2) Abort setup (3) Power off and restart the VM (4) Destroy VM and abort setup (1, 2, 3, 4)[1]: ## Session 2 [nolden@oVirtNode01 ~]$ sudo hosted-engine --console /usr/share/vdsm/vdsClient.py:33: DeprecationWarning: vdscli uses xmlrpc. since ovirt 3.6 xmlrpc is deprecated, please use vdsm.jsonrpcvdscli from vdsm import utils, vdscli, constants The engine VM is running on this host Verbunden mit der Domain: HostedEngine Escape-Zeichen ist ^] Fehler: Interner Fehler: Charakter-Einheit console0 verwendet nicht ein PTY [nolden@oVirtNode01 ~]$ ssh root(a)oVirtEngine.com ssh: connect to host ovirtengine.com port 22: No route to host ## Back to session 1 ... (1, 2, 3, 4)[1]: 1 Checking for oVirt-Engine status at oVirtEngine.com... [ INFO ] Engine is still unreachable oVirt-Engine health status page is not yet reachable. The VM has been rebooted. To continue please install oVirt-Engine in the VM (Follow http://www.ovirt.org/Quick_Start_Guide for more info). Make a selection from the options below: (1) Continue setup - oVirt-Engine installation is ready and ovirt-engine service is up (2) Abort setup (3) Power off and restart the VM (4) Destroy VM and abort setup (1, 2, 3, 4)[1]: 2 [ ERROR ] Failed to execute stage 'Closing up': Setup aborted by user [ INFO ] Stage: Clean up [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine- setup/answers/answers-20161104130223.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Hosted Engine deployment failed: this system is not reliable, please check the issue,fix and redeploy Log file is located at /var/log/ovirt-hosted-engine-s etup/ovirt-hosted-engine-setup-20161104123834-chwikf.log _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users