12:03 a.m.
The oVirt development team is very happy to announce the general
availability of oVirt 3.3.2 as of December 19th 2013. This release
solidifies oVirt as a leading KVM management application and open
source alternative to VMware vSphere.
oVirt is available now for Fedora 19 and Red Hat Enterprise Linux 6.5
(or similar).
This release of oVirt includes 175 bug fixes and the first release of the
Backup and Restore API, which enables backup programs to integrate with oVirt.
This release also simplifies the Guide Me VM-creation wizard. See the release
notes [1] for a list of the new features and bugs fixed.
IMPORTANT NOTE: If you're upgrading from a previous version, please update
ovirt-release to the latest version (10) and verify you have the correct
repositories enabled by running the following commands
# yum update ovirt-release
# yum repolist enabled
before upgrading with the usual procedure. You should see the ovirt-3.3.2 and
ovirt-stable repositories listed in the output of the repolist command.
[1] http://www.ovirt.org/OVirt_3.3.2_release_notes
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
2:12 a.m.
I can't do an update of Engine for RHEL 6.
The 3.3.2 packages do not seem to have been pushed here:
http://resources.ovirt.org/releases/stable/rpm/EL/6/noarch/
-Bob
On 12/19/2013 09:03 AM, Sandro Bonazzola wrote:
The oVirt development team is very happy to announce the general
availability of oVirt 3.3.2 as of December 19th 2013. This release
solidifies oVirt as a leading KVM management application and open
source alternative to VMware vSphere.
oVirt is available now for Fedora 19 and Red Hat Enterprise Linux 6.5
(or similar).
This release of oVirt includes 175 bug fixes and the first release of the
Backup and Restore API, which enables backup programs to integrate with oVirt.
This release also simplifies the Guide Me VM-creation wizard. See the release
notes [1] for a list of the new features and bugs fixed.
IMPORTANT NOTE: If you're upgrading from a previous version, please update
ovirt-release to the latest version (10) and verify you have the correct
repositories enabled by running the following commands
# yum update ovirt-release
# yum repolist enabled
before upgrading with the usual procedure. You should see the ovirt-3.3.2 and
ovirt-stable repositories listed in the output of the repolist command.
[1] http://www.ovirt.org/OVirt_3.3.2_release_notes
2:13 a.m.
--=-3dE7IsmtUsDdyfVDGq4h
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
Am Freitag, den 20.12.2013, 11:12 -0500 schrieb Bob Doolittle:
I can't do an update of Engine for RHEL 6.
=20
The 3.3.2 packages do not seem to have been pushed here:
=20
http://resources.ovirt.org/releases/stable/rpm/EL/6/noarch/
Thanks - I observed the same.
- fabian
-Bob
=20
On 12/19/2013 09:03 AM, Sandro Bonazzola wrote:
> The oVirt development team is very happy to announce the general
> availability of oVirt 3.3.2 as of December 19th 2013. This release
> solidifies oVirt as a leading KVM management application and open
> source alternative to VMware vSphere.
>
> oVirt is available now for Fedora 19 and Red Hat Enterprise Linux 6.5
> (or similar).
>
> This release of oVirt includes 175 bug fixes and the first release of t=
he
> Backup and Restore API, which enables backup programs to
integrate with=
oVirt.
> This release also simplifies the Guide Me VM-creation wizard.
See the r=
elease
> notes [1] for a list of the new features and bugs fixed.
>
> IMPORTANT NOTE: If you're upgrading from a previous version, please upd=
ate
> ovirt-release to the latest version (10) and verify you have the
correc=
t
> repositories enabled by running the following commands
>
> # yum update ovirt-release
> # yum repolist enabled
>
> before upgrading with the usual procedure. You should see the ovirt-3.3=
.2
and
> ovirt-stable repositories listed in the output of the repolist
command.
>
>
>
> [1] http://www.ovirt.org/OVirt_3.3.2_release_notes
>
=20
_______________________________________________
Arch mailing list
Arch(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/arch
--=-3dE7IsmtUsDdyfVDGq4h
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: This is a digitally signed message part
Content-Transfer-Encoding: 7bit
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=OEfX
-----END PGP SIGNATURE-----
--=-3dE7IsmtUsDdyfVDGq4h--
2:23 a.m.
I think the problem may be other than I indicated, however, because I
don't see ovirt-engine-3.3.2 in the FC19 stable repo either. Here's the
error output of my update command:
Error: Package: ovirt-engine-3.3.1-2.el6.noarch (@ovirt-stable)
Requires: ovirt-engine-websocket-proxy = 3.3.1-2.el6
Removing: ovirt-engine-websocket-proxy-3.3.1-2.el6.noarch
(@ovirt-stable)
ovirt-engine-websocket-proxy = 3.3.1-2.el6
Updated By: ovirt-engine-websocket-proxy-3.3.2-1.el6.noarch
(ovirt-3.3.2)
ovirt-engine-websocket-proxy = 3.3.2-1.el6
Available: ovirt-engine-websocket-proxy-3.3.0-3.el6.noarch
(ovirt-stable)
ovirt-engine-websocket-proxy = 3.3.0-3.el6
Available: ovirt-engine-websocket-proxy-3.3.0-4.el6.noarch
(ovirt-stable)
ovirt-engine-websocket-proxy = 3.3.0-4.el6
Available: ovirt-engine-websocket-proxy-3.3.0.1-1.el6.noarch
(ovirt-stable)
ovirt-engine-websocket-proxy = 3.3.0.1-1.el6
Available: ovirt-engine-websocket-proxy-3.3.1-1.el6.noarch
(ovirt-stable)
ovirt-engine-websocket-proxy = 3.3.1-1.el6
I have attached my current repo config, after the update of
ovirt-release-el6-10-1
I'm not sure why it's not seeing
http://resources.ovirt.org/releases/3.3.2/rpm/EL/6/noarch/ovirt-engine-3....
I do see that repository enabled in "yum repolist enabled" output.
-Bob
On 12/20/2013 11:13 AM, Fabian Deutsch wrote:
Am Freitag, den 20.12.2013, 11:12 -0500 schrieb Bob Doolittle:
> I can't do an update of Engine for RHEL 6.
>
> The 3.3.2 packages do not seem to have been pushed here:
>
> http://resources.ovirt.org/releases/stable/rpm/EL/6/noarch/
Thanks - I observed the same.
- fabian
> -Bob
>
> On 12/19/2013 09:03 AM, Sandro Bonazzola wrote:
>> The oVirt development team is very happy to announce the general
>> availability of oVirt 3.3.2 as of December 19th 2013. This release
>> solidifies oVirt as a leading KVM management application and open
>> source alternative to VMware vSphere.
>>
>> oVirt is available now for Fedora 19 and Red Hat Enterprise Linux 6.5
>> (or similar).
>>
>> This release of oVirt includes 175 bug fixes and the first release of the
>> Backup and Restore API, which enables backup programs to integrate with oVirt.
>> This release also simplifies the Guide Me VM-creation wizard. See the release
>> notes [1] for a list of the new features and bugs fixed.
>>
>> IMPORTANT NOTE: If you're upgrading from a previous version, please update
>> ovirt-release to the latest version (10) and verify you have the correct
>> repositories enabled by running the following commands
>>
>> # yum update ovirt-release
>> # yum repolist enabled
>>
>> before upgrading with the usual procedure. You should see the ovirt-3.3.2 and
>> ovirt-stable repositories listed in the output of the repolist command.
>>
>>
>>
>> [1] http://www.ovirt.org/OVirt_3.3.2_release_notes
>>
> _______________________________________________
> Arch mailing list
> Arch(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/arch
7:55 p.m.
This is a multi-part message in MIME format.
------=_NextPartTM-000-d79d0da8-d4d0-4e94-a2c0-a9a05077b0ba
Content-Type: text/plain; charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
We are on centos 6.5 and got similar dependency errors but simply replaced =
ovirt-release with ovirt-release-el6 in the guide. Afterwards everything wo=
rked smoothly.
Do not know if it helps
Von meinem Xperia=99-Smartphone gesendet
Bob Doolittle <bob(a)doolittle.us.com> schrieb:
I think the problem may be other than I indicated, however, because I
don't see ovirt-engine-3.3.2 in the FC19 stable repo either. Here's the
error output of my update command:
Error: Package: ovirt-engine-3.3.1-2.el6.noarch (@ovirt-stable)
Requires: ovirt-engine-websocket-proxy =3D 3.3.1-2.el6
Removing: ovirt-engine-websocket-proxy-3.3.1-2.el6.noarch
(@ovirt-stable)
ovirt-engine-websocket-proxy =3D 3.3.1-2.el6
Updated By: ovirt-engine-websocket-proxy-3.3.2-1.el6.noarch
(ovirt-3.3.2)
ovirt-engine-websocket-proxy =3D 3.3.2-1.el6
Available: ovirt-engine-websocket-proxy-3.3.0-3.el6.noarch
(ovirt-stable)
ovirt-engine-websocket-proxy =3D 3.3.0-3.el6
Available: ovirt-engine-websocket-proxy-3.3.0-4.el6.noarch
(ovirt-stable)
ovirt-engine-websocket-proxy =3D 3.3.0-4.el6
Available: ovirt-engine-websocket-proxy-3.3.0.1-1.el6.noarch
(ovirt-stable)
ovirt-engine-websocket-proxy =3D 3.3.0.1-1.el6
Available: ovirt-engine-websocket-proxy-3.3.1-1.el6.noarch
(ovirt-stable)
ovirt-engine-websocket-proxy =3D 3.3.1-1.el6
I have attached my current repo config, after the update of
ovirt-release-el6-10-1
I'm not sure why it's not seeing
http://resources.ovirt.org/releases/3.3.2/rpm/EL/6/noarch/ovirt-engine-3.3.=
2-1.el6.noarch.rpm
I do see that repository enabled in "yum repolist enabled" output.
-Bob
On 12/20/2013 11:13 AM, Fabian Deutsch wrote:
Am Freitag, den 20.12.2013, 11:12 -0500 schrieb Bob Doolittle:
> I can't do an update of Engine for RHEL 6.
>
> The 3.3.2 packages do not seem to have been pushed here:
>
> http://resources.ovirt.org/releases/stable/rpm/EL/6/noarch/
Thanks - I observed the same.
- fabian
> -Bob
>
> On 12/19/2013 09:03 AM, Sandro Bonazzola wrote:
>> The oVirt development team is very happy to announce the general
>> availability of oVirt 3.3.2 as of December 19th 2013. This release
>> solidifies oVirt as a leading KVM management application and open
>> source alternative to VMware vSphere.
>>
>> oVirt is available now for Fedora 19 and Red Hat Enterprise Linux 6.5
>> (or similar).
>>
>> This release of oVirt includes 175 bug fixes and the first release of t=
he
>> Backup and Restore API, which enables backup programs to
integrate with=
oVirt.
>> This release also simplifies the Guide Me VM-creation wizard.
See the r=
elease
>> notes [1] for a list of the new features and bugs fixed.
>>
>> IMPORTANT NOTE: If you're upgrading from a previous version, please upd=
ate
>> ovirt-release to the latest version (10) and verify you have
the correc=
t
>> repositories enabled by running the following commands
>>
>> # yum update ovirt-release
>> # yum repolist enabled
>>
>> before upgrading with the usual procedure. You should see the ovirt-3.3=
.2
and
>> ovirt-stable repositories listed in the output of the
repolist command.
>>
>>
>>
>> [1] http://www.ovirt.org/OVirt_3.3.2_release_notes
>>
> _______________________________________________
> Arch mailing list
> Arch(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/arch
------=_NextPartTM-000-d79d0da8-d4d0-4e94-a2c0-a9a05077b0ba
Content-Type: text/plain;
name="InterScan_Disclaimer.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="InterScan_Disclaimer.txt"
****************************************************************************
Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte
Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail
irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und
vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte
Weitergabe dieser Mail ist nicht gestattet.
Über das Internet versandte E-Mails können unter fremden Namen erstellt oder
manipuliert werden. Deshalb ist diese als E-Mail verschickte Nachricht keine
rechtsverbindliche Willenserklärung.
Collogia
Unternehmensberatung AG
Ubierring 11
D-50678 Köln
Vorstand:
Kadir Akin
Dr. Michael Höhnerbach
Vorsitzender des Aufsichtsrates:
Hans Kristian Langva
Registergericht: Amtsgericht Köln
Registernummer: HRB 52 497
This e-mail may contain confidential and/or privileged information. If you
are not the intended recipient (or have received this e-mail in error)
please notify the sender immediately and destroy this e-mail. Any
unauthorized copying, disclosure or distribution of the material in this
e-mail is strictly forbidden.
e-mails sent over the internet may have been written under a wrong name or
been manipulated. That is why this message sent as an e-mail is not a
legally binding declaration of intention.
Collogia
Unternehmensberatung AG
Ubierring 11
D-50678 Köln
executive board:
Kadir Akin
Dr. Michael Höhnerbach
President of the supervisory board:
Hans Kristian Langva
Registry office: district court Cologne
Register number: HRB 52 497
****************************************************************************
------=_NextPartTM-000-d79d0da8-d4d0-4e94-a2c0-a9a05077b0ba--
10:24 p.m.
Thanks. I considered that but I've been hesitant to try manual workarounds
in case my environment proves helpful for troubleshooting or verifying a
solution. Clearly the community needs a real fix, although the lack of
response to this issue surprised me. Must be the holidays :-)
-Bob
On Dec 21, 2013 4:55 AM, "Markus Stockhausen" <stockhausen(a)collogia.de>
wrote:
We are on centos 6.5 and got similar dependency errors but simply
replaced
ovirt-release with ovirt-release-el6 in the guide. Afterwards everything
worked smoothly.
Do not know if it helps
Von meinem Xperia™-Smartphone gesendet
Bob Doolittle <bob(a)doolittle.us.com> schrieb:
I think the problem may be other than I indicated, however, because I
don't see ovirt-engine-3.3.2 in the FC19 stable repo either. Here's the
error output of my update command:
Error: Package: ovirt-engine-3.3.1-2.el6.noarch (@ovirt-stable)
Requires: ovirt-engine-websocket-proxy = 3.3.1-2.el6
Removing: ovirt-engine-websocket-proxy-3.3.1-2.el6.noarch
(@ovirt-stable)
ovirt-engine-websocket-proxy = 3.3.1-2.el6
Updated By: ovirt-engine-websocket-proxy-3.3.2-1.el6.noarch
(ovirt-3.3.2)
ovirt-engine-websocket-proxy = 3.3.2-1.el6
Available: ovirt-engine-websocket-proxy-3.3.0-3.el6.noarch
(ovirt-stable)
ovirt-engine-websocket-proxy = 3.3.0-3.el6
Available: ovirt-engine-websocket-proxy-3.3.0-4.el6.noarch
(ovirt-stable)
ovirt-engine-websocket-proxy = 3.3.0-4.el6
Available: ovirt-engine-websocket-proxy-3.3.0.1-1.el6.noarch
(ovirt-stable)
ovirt-engine-websocket-proxy = 3.3.0.1-1.el6
Available: ovirt-engine-websocket-proxy-3.3.1-1.el6.noarch
(ovirt-stable)
ovirt-engine-websocket-proxy = 3.3.1-1.el6
I have attached my current repo config, after the update of
ovirt-release-el6-10-1
I'm not sure why it's not seeing
http://resources.ovirt.org/releases/3.3.2/rpm/EL/6/noarch/ovirt-engine-3....
I do see that repository enabled in "yum repolist enabled" output.
-Bob
On 12/20/2013 11:13 AM, Fabian Deutsch wrote:
> Am Freitag, den 20.12.2013, 11:12 -0500 schrieb Bob Doolittle:
>> I can't do an update of Engine for RHEL 6.
>>
>> The 3.3.2 packages do not seem to have been pushed here:
>>
>> http://resources.ovirt.org/releases/stable/rpm/EL/6/noarch/
> Thanks - I observed the same.
>
> - fabian
>
>> -Bob
>>
>> On 12/19/2013 09:03 AM, Sandro Bonazzola wrote:
>>> The oVirt development team is very happy to announce the general
>>> availability of oVirt 3.3.2 as of December 19th 2013. This release
>>> solidifies oVirt as a leading KVM management application and open
>>> source alternative to VMware vSphere.
>>>
>>> oVirt is available now for Fedora 19 and Red Hat Enterprise Linux 6.5
>>> (or similar).
>>>
>>> This release of oVirt includes 175 bug fixes and the first release of
the
>>> Backup and Restore API, which enables backup programs to integrate
with oVirt.
>>> This release also simplifies the Guide Me VM-creation wizard. See the
release
>>> notes [1] for a list of the new features and bugs fixed.
>>>
>>> IMPORTANT NOTE: If you're upgrading from a previous version, please
update
>>> ovirt-release to the latest version (10) and verify you have the
correct
>>> repositories enabled by running the following commands
>>>
>>> # yum update ovirt-release
>>> # yum repolist enabled
>>>
>>> before upgrading with the usual procedure. You should see the
ovirt-3.3.2 and
>>> ovirt-stable repositories listed in the output of the repolist command.
>>>
>>>
>>>
>>> [1] http://www.ovirt.org/OVirt_3.3.2_release_notes
>>>
>> _______________________________________________
>> Arch mailing list
>> Arch(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/arch
10:41 p.m.
This is a multi-part message in MIME format.
------=_NextPartTM-000-2c5d89ef-cf5e-4c2f-a507-777146cb2cc9
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Von: Bob Doolittle [bob(a)doolittle.us.com]=0A=
Gesendet: Samstag, 21. Dezember 2013 13:24=0A=
An: Markus Stockhausen=0A=
Cc: users; announce(a)ovirt.org; Fabian Deutsch; arch; board; engine-devel=
=0A=
Betreff: Re: AW: Re: [Users] oVirt 3.3.2 release=0A=
=0A=
Thanks. I considered that but I've been hesitant to try =0A=
manual workarounds in case my environment proves =0A=
helpful for troubleshooting or verifying a solution. =0A=
Clearly the community needs a real fix, although the =0A=
lack of response to this issue surprised me. Must be =0A=
the holidays :-)=0A=
-Bob=0A=
=0A=
Maybe I should make it a little bit clearer for the=0A=
Centos 6.5 setup:=0A=
=0A=
The guide from the release page reads:=0A=
=0A=
yum update ovirt-release=0A=
yum update ovirt-engine-setup=0A=
engine-setup=0A=
=0A=
And we did:=0A=
=0A=
yum update ovirt-release-el6=0A=
yum update ovirt-engine-setup=0A=
engine-setup=0A=
=0A=
This process does not give any warning and works=0A=
without any issues. We are on 3.3.2 since yesterday.=0A=
=0A=
Markus=0A=
=0A=
------=_NextPartTM-000-2c5d89ef-cf5e-4c2f-a507-777146cb2cc9
Content-Type: text/plain;
name="InterScan_Disclaimer.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="InterScan_Disclaimer.txt"
****************************************************************************
Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte
Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail
irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und
vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte
Weitergabe dieser Mail ist nicht gestattet.
Über das Internet versandte E-Mails können unter fremden Namen erstellt oder
manipuliert werden. Deshalb ist diese als E-Mail verschickte Nachricht keine
rechtsverbindliche Willenserklärung.
Collogia
Unternehmensberatung AG
Ubierring 11
D-50678 Köln
Vorstand:
Kadir Akin
Dr. Michael Höhnerbach
Vorsitzender des Aufsichtsrates:
Hans Kristian Langva
Registergericht: Amtsgericht Köln
Registernummer: HRB 52 497
This e-mail may contain confidential and/or privileged information. If you
are not the intended recipient (or have received this e-mail in error)
please notify the sender immediately and destroy this e-mail. Any
unauthorized copying, disclosure or distribution of the material in this
e-mail is strictly forbidden.
e-mails sent over the internet may have been written under a wrong name or
been manipulated. That is why this message sent as an e-mail is not a
legally binding declaration of intention.
Collogia
Unternehmensberatung AG
Ubierring 11
D-50678 Köln
executive board:
Kadir Akin
Dr. Michael Höhnerbach
President of the supervisory board:
Hans Kristian Langva
Registry office: district court Cologne
Register number: HRB 52 497
****************************************************************************
------=_NextPartTM-000-2c5d89ef-cf5e-4c2f-a507-777146cb2cc9--
4:56 p.m.
Il 20/12/2013 17:23, Bob Doolittle ha scritto:
I think the problem may be other than I indicated, however, because I
don't see ovirt-engine-3.3.2 in the FC19 stable repo either. Here's the error
output of my update command:
Error: Package: ovirt-engine-3.3.1-2.el6.noarch (@ovirt-stable)
Requires: ovirt-engine-websocket-proxy = 3.3.1-2.el6
Removing: ovirt-engine-websocket-proxy-3.3.1-2.el6.noarch (@ovirt-stable)
ovirt-engine-websocket-proxy = 3.3.1-2.el6
Updated By: ovirt-engine-websocket-proxy-3.3.2-1.el6.noarch (ovirt-3.3.2)
ovirt-engine-websocket-proxy = 3.3.2-1.el6
Available: ovirt-engine-websocket-proxy-3.3.0-3.el6.noarch (ovirt-stable)
ovirt-engine-websocket-proxy = 3.3.0-3.el6
Available: ovirt-engine-websocket-proxy-3.3.0-4.el6.noarch (ovirt-stable)
ovirt-engine-websocket-proxy = 3.3.0-4.el6
Available: ovirt-engine-websocket-proxy-3.3.0.1-1.el6.noarch (ovirt-stable)
ovirt-engine-websocket-proxy = 3.3.0.1-1.el6
Available: ovirt-engine-websocket-proxy-3.3.1-1.el6.noarch (ovirt-stable)
ovirt-engine-websocket-proxy = 3.3.1-1.el6
This is a bug in ovirt-engine-3.3.1 dependencies fixed in 3.3.2
(Bug 1033629 - Unable to run regular yum update due to implicit (undeclared) version lock
on rhevm-websocket-proxy )
please follow upgrade path as in release notes:
# yum update ovirt-release
# yum repolist enabled
# yum update ovirt-engine-setup
# engine-setup
I have attached my current repo config, after the update of ovirt-release-el6-10-1
I'm not sure why it's not seeing
http://resources.ovirt.org/releases/3.3.2/rpm/EL/6/noarch/ovirt-engine-3....
I do see that repository enabled in "yum repolist enabled" output.
-Bob
On 12/20/2013 11:13 AM, Fabian Deutsch wrote:
> Am Freitag, den 20.12.2013, 11:12 -0500 schrieb Bob Doolittle:
>> I can't do an update of Engine for RHEL 6.
>>
>> The 3.3.2 packages do not seem to have been pushed here:
>>
>> http://resources.ovirt.org/releases/stable/rpm/EL/6/noarch/
> Thanks - I observed the same.
>
> - fabian
>
>> -Bob
>>
>> On 12/19/2013 09:03 AM, Sandro Bonazzola wrote:
>>> The oVirt development team is very happy to announce the general
>>> availability of oVirt 3.3.2 as of December 19th 2013. This release
>>> solidifies oVirt as a leading KVM management application and open
>>> source alternative to VMware vSphere.
>>>
>>> oVirt is available now for Fedora 19 and Red Hat Enterprise Linux 6.5
>>> (or similar).
>>>
>>> This release of oVirt includes 175 bug fixes and the first release of the
>>> Backup and Restore API, which enables backup programs to integrate with
oVirt.
>>> This release also simplifies the Guide Me VM-creation wizard. See the
release
>>> notes [1] for a list of the new features and bugs fixed.
>>>
>>> IMPORTANT NOTE: If you're upgrading from a previous version, please
update
>>> ovirt-release to the latest version (10) and verify you have the correct
>>> repositories enabled by running the following commands
>>>
>>> # yum update ovirt-release
>>> # yum repolist enabled
>>>
>>> before upgrading with the usual procedure. You should see the ovirt-3.3.2
and
>>> ovirt-stable repositories listed in the output of the repolist command.
>>>
>>>
>>>
>>> [1] http://www.ovirt.org/OVirt_3.3.2_release_notes
>>>
>> _______________________________________________
>> Arch mailing list
>> Arch(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/arch
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
8:18 a.m.
On 12/23/13 01:56, Sandro Bonazzola wrote:
Il 20/12/2013 17:23, Bob Doolittle ha scritto:
> I think the problem may be other than I indicated, however, because I don't see
ovirt-engine-3.3.2 in the FC19 stable repo either. Here's the error
> output of my update command:
>
> Error: Package: ovirt-engine-3.3.1-2.el6.noarch (@ovirt-stable)
> Requires: ovirt-engine-websocket-proxy = 3.3.1-2.el6
> Removing: ovirt-engine-websocket-proxy-3.3.1-2.el6.noarch
(@ovirt-stable)
> ovirt-engine-websocket-proxy = 3.3.1-2.el6
> Updated By: ovirt-engine-websocket-proxy-3.3.2-1.el6.noarch
(ovirt-3.3.2)
> ovirt-engine-websocket-proxy = 3.3.2-1.el6
> Available: ovirt-engine-websocket-proxy-3.3.0-3.el6.noarch
(ovirt-stable)
> ovirt-engine-websocket-proxy = 3.3.0-3.el6
> Available: ovirt-engine-websocket-proxy-3.3.0-4.el6.noarch
(ovirt-stable)
> ovirt-engine-websocket-proxy = 3.3.0-4.el6
> Available: ovirt-engine-websocket-proxy-3.3.0.1-1.el6.noarch
(ovirt-stable)
> ovirt-engine-websocket-proxy = 3.3.0.1-1.el6
> Available: ovirt-engine-websocket-proxy-3.3.1-1.el6.noarch
(ovirt-stable)
> ovirt-engine-websocket-proxy = 3.3.1-1.el6
This is a bug in ovirt-engine-3.3.1 dependencies fixed in 3.3.2
(Bug 1033629 - Unable to run regular yum update due to implicit (undeclared) version lock
on rhevm-websocket-proxy )
please follow upgrade path as in release notes:
# yum update ovirt-release
# yum repolist enabled
# yum update ovirt-engine-setup
# engine-setup
This did the trick. Thanks Sandro.
-Bob
3777
days inactive
3784
days old
8 comments
4 participants
participants (4)
-
Bob Doolittle -
Fabian Deutsch -
Markus Stockhausen -
Sandro Bonazzola