Hi! 1. Do you use NetworkManager? 2. Do you run Engine and the host on the same machine? 3. Did you use IP or hostname when added the host to the Engine? 4. Can you please attach your /etc/sysconfig/network-scripts/ifcfg-* configuration? On Tue, May 17, 2016 at 2:29 PM, Clifford Trueman < clifford.trueman@gmail.com> wrote:

Morning,

Having an issue with a completely standalone system (no actual network connectivity) Fresh out of the box installation.

The issue I'm running into is actually well described here;

https://lists.fedorahosted.org/pipermail/vdsm-devel/2013-June/002403.html

I've read through the admin guide several times and I'm struggling to find any information detailing exactly how ovirtmangment network exists on my system.

My configuration is process was as follows:

Centos 7 System has two physical interfaces

we'll call them en1 en2 for simplicities sake.

en1 = 10.0.0.1/24 resolves to in host file as localmachine.test.net en2 = 192.168.0.1 bridged to ovirtmgmt

with my fresh install of ovirt-engine, I added my local machine as host node and it installed the packages and shows up, but fails to down state after about 10 - 15 seconds with

Host moved to Non-Operational state due to interfaces which are down are needed by required networks in your cluster.

I then tried binding the ovirtmgmt network to the other interface so it didn't ride on the same NIC that resolves the FQDN of the box.

So I'm currently at a loss of what to try next, any help would be greatly appreciated.

_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users