Hi, I have ethernet nic with 10Gbps link speed. I want to setup one network over it with rate limit as 5Gbps When I tried to enter 5000 mbps rate in host qos it throws error saying value cannot be more than 1024. Can some one help me to know how to set limit as 5000mbps(5gbps) rate ? Thanks, ~Rohit
Hi Rohit You can increase the default values with engine-config command: engine-config -s MaxAverageNetworkQoSValue=5000 systemctl restart ovirt-engine Now you should be able to set higher QoS value for 'Rate Limit' and 'Committed Rate' Cheers) On Thu, Jun 22, 2017 at 8:13 AM, TranceWorldLogic . < tranceworldlogic@gmail.com> wrote:
Hi,
I have ethernet nic with 10Gbps link speed. I want to setup one network over it with rate limit as 5Gbps
When I tried to enter 5000 mbps rate in host qos it throws error saying value cannot be more than 1024. Can some one help me to know how to set limit as 5000mbps(5gbps) rate ?
Thanks, ~Rohit
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- Michael Burman RedHat Israel, RHV-M Network QE Mobile: 054-5355725 IRC: mburman
Hello Rohit, Just to clarify, You edited the Logical Networks via the Rhevm GUI -> Network Tab -> Selected relevant Network -> Edit Logical Network -> Selected Host Network QoS -> Custom MTU and entered 5000 and pressed OK and then the error was generated? Also provide the following: What version of Rhevm are you running? Have you verified that your physical infrastructure (ports/switches) support and are set to 10g and not the default of 1024? Regards, Kevin On Thu, Jun 22, 2017 at 8:13 AM, TranceWorldLogic . < tranceworldlogic@gmail.com> wrote:
Hi,
I have ethernet nic with 10Gbps link speed. I want to setup one network over it with rate limit as 5Gbps
When I tried to enter 5000 mbps rate in host qos it throws error saying value cannot be more than 1024. Can some one help me to know how to set limit as 5000mbps(5gbps) rate ?
Thanks, ~Rohit
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Kevin You confusing 2 different things. MTU is not related to the question. The user want to apply 5000mbps for 'Rate Limit' and 'Committed Rate' , the default is 1024 and it's possible to increase it. Not related to MTU Thanks, On Thu, Jun 22, 2017 at 12:59 PM, Kevin Goldblatt <kgoldbla@redhat.com> wrote:
Hello Rohit,
Just to clarify,
You edited the Logical Networks via the Rhevm GUI -> Network Tab -> Selected relevant Network -> Edit Logical Network -> Selected Host Network QoS -> Custom MTU and entered 5000 and pressed OK and then the error was generated?
Also provide the following:
What version of Rhevm are you running?
Have you verified that your physical infrastructure (ports/switches) support and are set to 10g and not the default of 1024?
Regards,
Kevin
On Thu, Jun 22, 2017 at 8:13 AM, TranceWorldLogic . < tranceworldlogic@gmail.com> wrote:
Hi,
I have ethernet nic with 10Gbps link speed. I want to setup one network over it with rate limit as 5Gbps
When I tried to enter 5000 mbps rate in host qos it throws error saying value cannot be more than 1024. Can some one help me to know how to set limit as 5000mbps(5gbps) rate ?
Thanks, ~Rohit
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- Michael Burman RedHat Israel, RHV-M Network QE Mobile: 054-5355725 IRC: mburman
Thanks Michael, Kevin, I am not changing MTU, it same as 1500. On Thu, Jun 22, 2017 at 3:41 PM, Michael Burman <mburman@redhat.com> wrote:
Kevin
You confusing 2 different things. MTU is not related to the question. The user want to apply 5000mbps for 'Rate Limit' and 'Committed Rate' , the default is 1024 and it's possible to increase it.
Not related to MTU
Thanks,
On Thu, Jun 22, 2017 at 12:59 PM, Kevin Goldblatt <kgoldbla@redhat.com> wrote:
Hello Rohit,
Just to clarify,
You edited the Logical Networks via the Rhevm GUI -> Network Tab -> Selected relevant Network -> Edit Logical Network -> Selected Host Network QoS -> Custom MTU and entered 5000 and pressed OK and then the error was generated?
Also provide the following:
What version of Rhevm are you running?
Have you verified that your physical infrastructure (ports/switches) support and are set to 10g and not the default of 1024?
Regards,
Kevin
On Thu, Jun 22, 2017 at 8:13 AM, TranceWorldLogic . < tranceworldlogic@gmail.com> wrote:
Hi,
I have ethernet nic with 10Gbps link speed. I want to setup one network over it with rate limit as 5Gbps
When I tried to enter 5000 mbps rate in host qos it throws error saying value cannot be more than 1024. Can some one help me to know how to set limit as 5000mbps(5gbps) rate ?
Thanks, ~Rohit
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
-- Michael Burman RedHat Israel, RHV-M Network QE
Mobile: 054-5355725 IRC: mburman
participants (3)
-
Kevin Goldblatt -
Michael Burman -
TranceWorldLogic .