6:46 a.m.
Hi guys,
I'm testing some DL360gen8 hosts and was wondering what power
management utility would be recommended, I usually only use Dell
servers and use the ipmilan by default, but not sure if there would be
any benefits to rather using iLo instead?
Thanks.
Regards.
Neil Wilson.
9 a.m.
On Tue, 2013-09-03 at 15:46 +0200, Neil wrote:
Hi guys,
I'm testing some DL360gen8 hosts and was wondering what power
management utility would be recommended, I usually only use Dell
servers and use the ipmilan by default, but not sure if there would be
any benefits to rather using iLo instead?
I mainly use ipmilan in oVirt/RHEV/clusters as this works fine on newer
generations where fence_ilo sometimes doesn't.
Regards,
René
Thanks.
Regards.
Neil Wilson.
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
6:31 a.m.
Hi Rene,
On Tue, Sep 3, 2013 at 6:00 PM, René Koch (ovido) <r.koch(a)ovido.at> wrote:
I mainly use ipmilan in oVirt/RHEV/clusters as this works fine on
newer
generations where fence_ilo sometimes doesn't.
Regards,
René
Thank you very much, I've installed OpenIPMI and configured the BMC's
and I was quite surprised that when choosing the Power Management
type, ipmilan didn't pass the test, however iLo4 and iLo3 passed fine,
not sure if it's perhaps a difference with the Hp Gen8 servers or if I
just don't completely understand exactly what I've setup, which is
quite possible :)
Thanks for your help anyway, I'm content as it all seems to be working
using iLo4.
Much appreciated.
Regards.
Neil Wilson
3887
days inactive
3888
days old
2 comments
2 participants
participants (2)
-
Neil -
René Koch (ovido)