Hi, I configured a Rocky Linux 9 ARM64 Raspberry Pi 4B as an oVirt Host. When adding to a new Cluster under an established Datacenter it fails configuring OVN, I did make sure ovirt-provider-ovn and ovirt-provider-ovn-driver was installed. The error I found after digging into the ansible yml file on the Hosted Engine and the Python py related to configuring OVN. Ultimately the error is below: [root@ovirtnode3 ~]# vdsm-tool ovn-config 192.168.1.50 ovirtnode3.test.com Traceback (most recent call last): File "/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py", line 117, in get_network return networks[net_name] KeyError: 'ovirtnode3.test.com' During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/bin/vdsm-tool", line 195, in main return tool_command[cmd]["command"](*args) File "/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py", line 63, in ovn_config ip_address = get_ip_addr(get_network(network_caps(), net_name)) File "/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py", line 119, in get_network raise NetworkNotFoundError(net_name) vdsm.tool.ovn_config.NetworkNotFoundError: ovirtnode3.test.com Running vdsm-tool list-nets displays nothing. Something is off in the script, but I admit I am not sure how. I know oVirt says Aarch64 is experimental, but this is unusable if vdsm-tool can't even gather/list the networks or config the OVN.