On 05/29/2013 02:03 AM, Ryan Wilkinson wrote: > I've noticed with Fedora 17 that usb devices plugged in after a spice > session is initiated automagically pass-through to the virtual desktop > without manually selecting them but not so with Fedora 18. They pass > through if you manually select them from the drop down bar. Any way to > make 18 work like 17??

Hans, Thanks for the info. Remote viewer has keyboard focus when attempting usb pass-through. Just tried again to confirm. These are the two package versions I'm seeing that are installed: virt-viewer.x86_64 0.5.4-3.fc18 virt-viewer.i686 0.5.3-1.fc17

Yes, I can manually pass it through. Not necessarily looking to use this specific device (usb wifi adaptor) but was just handy. Here is the output:

Bus 001 Device 003: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191SU 802.11n WLAN Adapter Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0bda Realtek Semiconductor Corp. idProduct 0x8172 RTL8191SU 802.11n WLAN Adapter bcdDevice 2.00 iManufacturer 1 Manufacturer Realtek iProduct 2 RTL8191S WLAN Adapter iSerial 3 00e04c000001 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 46 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x06 EP 6 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x0d EP 13 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Bus 005 Device 002: ID 2101:020f ActionStar Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x2101 ActionStar idProduct 0x020f bcdDevice 0.01 iManufacturer 0 iProduct 0 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 59 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 1 Keyboard iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.01 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 63 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.01 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 72 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0002 (Bus Powered) Remote Wakeup Enabled Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 3.06 iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 ehci_hcd iProduct 2 EHCI Host Controller iSerial 1 0000:00:1d.7 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 8 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00 PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Port 6: 0000.0503 highspeed power enable connect Port 7: 0000.0100 power Port 8: 0000.0100 power Device Status: 0x0001 Self Powered Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.06 iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:1d.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Device Status: 0x0001 Self Powered Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.06 iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:1d.1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Device Status: 0x0001 Self Powered Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.06 iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:1d.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Device Status: 0x0001 Self Powered Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.06 iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:1d.3 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0303 lowspeed power enable connect Device Status: 0x0001 Self Powered On Thu, May 30, 2013 at 8:27 AM, Hans de Goede <hdegoede(a)redhat.com <mailto:hdegoede@redhat.com>> wrote: Hi, On 05/30/2013 04:17 PM, Ryan Wilkinson wrote: Hans, Thanks for the info. Remote viewer has keyboard focus when attempting usb pass-through. Just tried again to confirm. These are the two package versions I'm seeing that are installed: virt-viewer.x86_64 0.5.4-3.fc18 virt-viewer.i686 0.5.3-1.fc17 And you can pass the device through manually from the menu? Can you do lsusb -v with the device plugin and then copy and paste the output for the device in question into your next mail ? Regards, Hans

I didn't install double. The one package was the version on the FC17 box and the other was FC18 box. On Thu, May 30, 2013 at 9:08 AM, Hans de Goede <hdegoede(a)redhat.com&gt;wrote: > Hi, > > > On 05/30/2013 04:34 PM, Ryan Wilkinson wrote: > >> Yes, I can manually pass it through. Not necessarily looking to use >> this specific device (usb wifi adaptor) but was just handy. Here is the >> output: >> > > Hmm, that should work. > > I just noticed that in your last mail you mentioned that you've > virt-viewer installed > "double". > > Can you try doing: > > rpm -e --allmatches virt-viewer > yum install virt-viewer > > And see if that fixes things ? > > Regards, > > Hans > > > > >> Bus 001 Device 003: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191SU >> 802.11n WLAN Adapter >> Device Descriptor: >> bLength 18 >> bDescriptorType 1 >> bcdUSB 2.00 >> bDeviceClass 0 (Defined at Interface level) >> bDeviceSubClass 0 >> bDeviceProtocol 0 >> bMaxPacketSize0 64 >> idVendor 0x0bda Realtek Semiconductor Corp. >> idProduct 0x8172 RTL8191SU 802.11n WLAN Adapter >> bcdDevice 2.00 >> iManufacturer 1 Manufacturer Realtek >> iProduct 2 RTL8191S WLAN Adapter >> iSerial 3 00e04c000001 >> bNumConfigurations 1 >> Configuration Descriptor: >> bLength 9 >> bDescriptorType 2 >> wTotalLength 46 >> bNumInterfaces 1 >> bConfigurationValue 1 >> iConfiguration 0 >> bmAttributes 0x80 >> (Bus Powered) >> MaxPower 500mA >> Interface Descriptor: >> bLength 9 >> bDescriptorType 4 >> bInterfaceNumber 0 >> bAlternateSetting 0 >> bNumEndpoints 4 >> bInterfaceClass 255 Vendor Specific Class >> bInterfaceSubClass 255 Vendor Specific Subclass >> bInterfaceProtocol 255 Vendor Specific Protocol >> iInterface 0 >> Endpoint Descriptor: >> bLength 7 >> bDescriptorType 5 >> bEndpointAddress 0x83 EP 3 IN >> bmAttributes 2 >> Transfer Type Bulk >> Synch Type None >> Usage Type Data >> wMaxPacketSize 0x0200 1x 512 bytes >> bInterval 0 >> Endpoint Descriptor: >> bLength 7 >> bDescriptorType 5 >> bEndpointAddress 0x04 EP 4 OUT >> bmAttributes 2 >> Transfer Type Bulk >> Synch Type None >> Usage Type Data >> wMaxPacketSize 0x0200 1x 512 bytes >> bInterval 0 >> Endpoint Descriptor: >> bLength 7 >> bDescriptorType 5 >> bEndpointAddress 0x06 EP 6 OUT >> bmAttributes 2 >> Transfer Type Bulk >> Synch Type None >> Usage Type Data >> wMaxPacketSize 0x0200 1x 512 bytes >> bInterval 0 >> Endpoint Descriptor: >> bLength 7 >> bDescriptorType 5 >> bEndpointAddress 0x0d EP 13 OUT >> bmAttributes 2 >> Transfer Type Bulk >> Synch Type None >> Usage Type Data >> wMaxPacketSize 0x0200 1x 512 bytes >> bInterval 0 >> Device Qualifier (for other device speed): >> bLength 10 >> bDescriptorType 6 >> bcdUSB 2.00 >> bDeviceClass 0 (Defined at Interface level) >> bDeviceSubClass 0 >> bDeviceProtocol 0 >> bMaxPacketSize0 64 >> bNumConfigurations 1 >> Device Status: 0x0000 >> (Bus Powered) >> >> Bus 005 Device 002: ID 2101:020f ActionStar >> Device Descriptor: >> bLength 18 >> bDescriptorType 1 >> bcdUSB 1.00 >> bDeviceClass 0 (Defined at Interface level) >> bDeviceSubClass 0 >> bDeviceProtocol 0 >> bMaxPacketSize0 8 >> idVendor 0x2101 ActionStar >> idProduct 0x020f >> bcdDevice 0.01 >> iManufacturer 0 >> iProduct 0 >> iSerial 0 >> bNumConfigurations 1 >> Configuration Descriptor: >> bLength 9 >> bDescriptorType 2 >> wTotalLength 59 >> bNumInterfaces 2 >> bConfigurationValue 1 >> iConfiguration 0 >> bmAttributes 0xa0 >> (Bus Powered) >> Remote Wakeup >> MaxPower 500mA >> Interface Descriptor: >> bLength 9 >> bDescriptorType 4 >> bInterfaceNumber 0 >> bAlternateSetting 0 >> bNumEndpoints 1 >> bInterfaceClass 3 Human Interface Device >> bInterfaceSubClass 1 Boot Interface Subclass >> bInterfaceProtocol 1 Keyboard >> iInterface 0 >> HID Device Descriptor: >> bLength 9 >> bDescriptorType 33 >> bcdHID 1.01 >> bCountryCode 0 Not supported >> bNumDescriptors 1 >> bDescriptorType 34 Report >> wDescriptorLength 63 >> Report Descriptors: >> ** UNAVAILABLE ** >> Endpoint Descriptor: >> bLength 7 >> bDescriptorType 5 >> bEndpointAddress 0x81 EP 1 IN >> bmAttributes 3 >> Transfer Type Interrupt >> Synch Type None >> Usage Type Data >> wMaxPacketSize 0x0008 1x 8 bytes >> bInterval 10 >> Interface Descriptor: >> bLength 9 >> bDescriptorType 4 >> bInterfaceNumber 1 >> bAlternateSetting 0 >> bNumEndpoints 1 >> bInterfaceClass 3 Human Interface Device >> bInterfaceSubClass 1 Boot Interface Subclass >> bInterfaceProtocol 2 Mouse >> iInterface 0 >> HID Device Descriptor: >> bLength 9 >> bDescriptorType 33 >> bcdHID 1.01 >> bCountryCode 0 Not supported >> bNumDescriptors 1 >> bDescriptorType 34 Report >> wDescriptorLength 72 >> Report Descriptors: >> ** UNAVAILABLE ** >> Endpoint Descriptor: >> bLength 7 >> bDescriptorType 5 >> bEndpointAddress 0x82 EP 2 IN >> bmAttributes 3 >> Transfer Type Interrupt >> Synch Type None >> Usage Type Data >> wMaxPacketSize 0x0008 1x 8 bytes >> bInterval 10 >> Device Status: 0x0002 >> (Bus Powered) >> Remote Wakeup Enabled >> >> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >> Device Descriptor: >> bLength 18 >> bDescriptorType 1 >> bcdUSB 2.00 >> bDeviceClass 9 Hub >> bDeviceSubClass 0 Unused >> bDeviceProtocol 0 Full speed (or root) hub >> bMaxPacketSize0 64 >> idVendor 0x1d6b Linux Foundation >> idProduct 0x0002 2.0 root hub >> bcdDevice 3.06 >> iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 ehci_hcd >> iProduct 2 EHCI Host Controller >> iSerial 1 0000:00:1d.7 >> bNumConfigurations 1 >> Configuration Descriptor: >> bLength 9 >> bDescriptorType 2 >> wTotalLength 25 >> bNumInterfaces 1 >> bConfigurationValue 1 >> iConfiguration 0 >> bmAttributes 0xe0 >> Self Powered >> Remote Wakeup >> MaxPower 0mA >> Interface Descriptor: >> bLength 9 >> bDescriptorType 4 >> bInterfaceNumber 0 >> bAlternateSetting 0 >> bNumEndpoints 1 >> bInterfaceClass 9 Hub >> bInterfaceSubClass 0 Unused >> bInterfaceProtocol 0 Full speed (or root) hub >> iInterface 0 >> Endpoint Descriptor: >> bLength 7 >> bDescriptorType 5 >> bEndpointAddress 0x81 EP 1 IN >> bmAttributes 3 >> Transfer Type Interrupt >> Synch Type None >> Usage Type Data >> wMaxPacketSize 0x0004 1x 4 bytes >> bInterval 12 >> Hub Descriptor: >> bLength 11 >> bDescriptorType 41 >> nNbrPorts 8 >> wHubCharacteristic 0x000a >> No power switching (usb 1.0) >> Per-port overcurrent protection >> bPwrOn2PwrGood 10 * 2 milli seconds >> bHubContrCurrent 0 milli Ampere >> DeviceRemovable 0x00 0x00 >> PortPwrCtrlMask 0xff 0xff >> Hub Port Status: >> Port 1: 0000.0100 power >> Port 2: 0000.0100 power >> Port 3: 0000.0100 power >> Port 4: 0000.0100 power >> Port 5: 0000.0100 power >> Port 6: 0000.0503 highspeed power enable connect >> Port 7: 0000.0100 power >> Port 8: 0000.0100 power >> Device Status: 0x0001 >> Self Powered >> >> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >> Device Descriptor: >> bLength 18 >> bDescriptorType 1 >> bcdUSB 1.10 >> bDeviceClass 9 Hub >> bDeviceSubClass 0 Unused >> bDeviceProtocol 0 Full speed (or root) hub >> bMaxPacketSize0 64 >> idVendor 0x1d6b Linux Foundation >> idProduct 0x0001 1.1 root hub >> bcdDevice 3.06 >> iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 uhci_hcd >> iProduct 2 UHCI Host Controller >> iSerial 1 0000:00:1d.0 >> bNumConfigurations 1 >> Configuration Descriptor: >> bLength 9 >> bDescriptorType 2 >> wTotalLength 25 >> bNumInterfaces 1 >> bConfigurationValue 1 >> iConfiguration 0 >> bmAttributes 0xe0 >> Self Powered >> Remote Wakeup >> MaxPower 0mA >> Interface Descriptor: >> bLength 9 >> bDescriptorType 4 >> bInterfaceNumber 0 >> bAlternateSetting 0 >> bNumEndpoints 1 >> bInterfaceClass 9 Hub >> bInterfaceSubClass 0 Unused >> bInterfaceProtocol 0 Full speed (or root) hub >> iInterface 0 >> Endpoint Descriptor: >> bLength 7 >> bDescriptorType 5 >> bEndpointAddress 0x81 EP 1 IN >> bmAttributes 3 >> Transfer Type Interrupt >> Synch Type None >> Usage Type Data >> wMaxPacketSize 0x0002 1x 2 bytes >> bInterval 255 >> Hub Descriptor: >> bLength 9 >> bDescriptorType 41 >> nNbrPorts 2 >> wHubCharacteristic 0x000a >> No power switching (usb 1.0) >> Per-port overcurrent protection >> bPwrOn2PwrGood 1 * 2 milli seconds >> bHubContrCurrent 0 milli Ampere >> DeviceRemovable 0x00 >> PortPwrCtrlMask 0xff >> Hub Port Status: >> Port 1: 0000.0100 power >> Port 2: 0000.0100 power >> Device Status: 0x0001 >> Self Powered >> >> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >> Device Descriptor: >> bLength 18 >> bDescriptorType 1 >> bcdUSB 1.10 >> bDeviceClass 9 Hub >> bDeviceSubClass 0 Unused >> bDeviceProtocol 0 Full speed (or root) hub >> bMaxPacketSize0 64 >> idVendor 0x1d6b Linux Foundation >> idProduct 0x0001 1.1 root hub >> bcdDevice 3.06 >> iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 uhci_hcd >> iProduct 2 UHCI Host Controller >> iSerial 1 0000:00:1d.1 >> bNumConfigurations 1 >> Configuration Descriptor: >> bLength 9 >> bDescriptorType 2 >> wTotalLength 25 >> bNumInterfaces 1 >> bConfigurationValue 1 >> iConfiguration 0 >> bmAttributes 0xe0 >> Self Powered >> Remote Wakeup >> MaxPower 0mA >> Interface Descriptor: >> bLength 9 >> bDescriptorType 4 >> bInterfaceNumber 0 >> bAlternateSetting 0 >> bNumEndpoints 1 >> bInterfaceClass 9 Hub >> bInterfaceSubClass 0 Unused >> bInterfaceProtocol 0 Full speed (or root) hub >> iInterface 0 >> Endpoint Descriptor: >> bLength 7 >> bDescriptorType 5 >> bEndpointAddress 0x81 EP 1 IN >> bmAttributes 3 >> Transfer Type Interrupt >> Synch Type None >> Usage Type Data >> wMaxPacketSize 0x0002 1x 2 bytes >> bInterval 255 >> Hub Descriptor: >> bLength 9 >> bDescriptorType 41 >> nNbrPorts 2 >> wHubCharacteristic 0x000a >> No power switching (usb 1.0) >> Per-port overcurrent protection >> bPwrOn2PwrGood 1 * 2 milli seconds >> bHubContrCurrent 0 milli Ampere >> DeviceRemovable 0x00 >> PortPwrCtrlMask 0xff >> Hub Port Status: >> Port 1: 0000.0100 power >> Port 2: 0000.0100 power >> Device Status: 0x0001 >> Self Powered >> >> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >> Device Descriptor: >> bLength 18 >> bDescriptorType 1 >> bcdUSB 1.10 >> bDeviceClass 9 Hub >> bDeviceSubClass 0 Unused >> bDeviceProtocol 0 Full speed (or root) hub >> bMaxPacketSize0 64 >> idVendor 0x1d6b Linux Foundation >> idProduct 0x0001 1.1 root hub >> bcdDevice 3.06 >> iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 uhci_hcd >> iProduct 2 UHCI Host Controller >> iSerial 1 0000:00:1d.2 >> bNumConfigurations 1 >> Configuration Descriptor: >> bLength 9 >> bDescriptorType 2 >> wTotalLength 25 >> bNumInterfaces 1 >> bConfigurationValue 1 >> iConfiguration 0 >> bmAttributes 0xe0 >> Self Powered >> Remote Wakeup >> MaxPower 0mA >> Interface Descriptor: >> bLength 9 >> bDescriptorType 4 >> bInterfaceNumber 0 >> bAlternateSetting 0 >> bNumEndpoints 1 >> bInterfaceClass 9 Hub >> bInterfaceSubClass 0 Unused >> bInterfaceProtocol 0 Full speed (or root) hub >> iInterface 0 >> Endpoint Descriptor: >> bLength 7 >> bDescriptorType 5 >> bEndpointAddress 0x81 EP 1 IN >> bmAttributes 3 >> Transfer Type Interrupt >> Synch Type None >> Usage Type Data >> wMaxPacketSize 0x0002 1x 2 bytes >> bInterval 255 >> Hub Descriptor: >> bLength 9 >> bDescriptorType 41 >> nNbrPorts 2 >> wHubCharacteristic 0x000a >> No power switching (usb 1.0) >> Per-port overcurrent protection >> bPwrOn2PwrGood 1 * 2 milli seconds >> bHubContrCurrent 0 milli Ampere >> DeviceRemovable 0x00 >> PortPwrCtrlMask 0xff >> Hub Port Status: >> Port 1: 0000.0100 power >> Port 2: 0000.0100 power >> Device Status: 0x0001 >> Self Powered >> >> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >> Device Descriptor: >> bLength 18 >> bDescriptorType 1 >> bcdUSB 1.10 >> bDeviceClass 9 Hub >> bDeviceSubClass 0 Unused >> bDeviceProtocol 0 Full speed (or root) hub >> bMaxPacketSize0 64 >> idVendor 0x1d6b Linux Foundation >> idProduct 0x0001 1.1 root hub >> bcdDevice 3.06 >> iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 uhci_hcd >> iProduct 2 UHCI Host Controller >> iSerial 1 0000:00:1d.3 >> bNumConfigurations 1 >> Configuration Descriptor: >> bLength 9 >> bDescriptorType 2 >> wTotalLength 25 >> bNumInterfaces 1 >> bConfigurationValue 1 >> iConfiguration 0 >> bmAttributes 0xe0 >> Self Powered >> Remote Wakeup >> MaxPower 0mA >> Interface Descriptor: >> bLength 9 >> bDescriptorType 4 >> bInterfaceNumber 0 >> bAlternateSetting 0 >> bNumEndpoints 1 >> bInterfaceClass 9 Hub >> bInterfaceSubClass 0 Unused >> bInterfaceProtocol 0 Full speed (or root) hub >> iInterface 0 >> Endpoint Descriptor: >> bLength 7 >> bDescriptorType 5 >> bEndpointAddress 0x81 EP 1 IN >> bmAttributes 3 >> Transfer Type Interrupt >> Synch Type None >> Usage Type Data >> wMaxPacketSize 0x0002 1x 2 bytes >> bInterval 255 >> Hub Descriptor: >> bLength 9 >> bDescriptorType 41 >> nNbrPorts 2 >> wHubCharacteristic 0x000a >> No power switching (usb 1.0) >> Per-port overcurrent protection >> bPwrOn2PwrGood 1 * 2 milli seconds >> bHubContrCurrent 0 milli Ampere >> DeviceRemovable 0x00 >> PortPwrCtrlMask 0xff >> Hub Port Status: >> Port 1: 0000.0100 power >> Port 2: 0000.0303 lowspeed power enable connect >> Device Status: 0x0001 >> Self Powered >> >> >> >> On Thu, May 30, 2013 at 8:27 AM, Hans de Goede <hdegoede(a)redhat.com&lt;mailto: >> hdegoede(a)redhat.com&gt;&gt; wrote: >> >> Hi, >> >> >> On 05/30/2013 04:17 PM, Ryan Wilkinson wrote: >> >> Hans, >> >> Thanks for the info. Remote viewer has keyboard focus when >> attempting usb pass-through. Just tried again to confirm. These are the >> two package versions I'm seeing that are installed: >> >> virt-viewer.x86_64 0.5.4-3.fc18 >> virt-viewer.i686 0.5.3-1.fc17 >> >> >> And you can pass the device through manually from the menu? >> >> Can you do lsusb -v with the device plugin and then copy and >> paste the output for the device in question into your next mail ? >> >> Regards, >> >> Hans >> >> >>