Re: [ovirt-users] [SOLVED] Re: Trying to make ovirt-hosted-engine-setup create a customized Engine-vm on 3.6 HC HE
7:59 a.m.
On Wed, Nov 25, 2015, at 12:10, Simone Tiraboschi wrote:
On Mon, Nov 23, 2015 at 10:17 PM, Giuseppe Ragusa
<giuseppe.ragusa(a)hotmail.com> wrote:
> On Tue, Oct 27, 2015, at 00:10, Giuseppe Ragusa wrote:
>
On Mon, Oct 26, 2015, at 09:48, Simone Tiraboschi wrote:
>
>
>
>
>
> On Mon, Oct 26, 2015 at 12:14 AM, Giuseppe Ragusa
> <giuseppe.ragusa(a)hotmail.com> wrote:
>
>> Hi all,
>
>> I'm experiencing some difficulties using oVirt 3.6 latest snapshot.
>
it seems that I spoke too soon :(
>
>
>> I'm trying to trick the self-hosted-engine setup to create a custom
>> engine vm with 3 nics (with fixed MACs/UUIDs).
>
>
>
>> The GlusterFS volume (3.7.5 hyperconverged, replica 3, for the
>> engine vm) and the network bridges (ovirtmgmt and other two
>> bridges, called nfs and lan, for the engine vm) have been
>> preconfigured on the initial fully-patched CentOS 7.1 host (plus
>> other two identical hosts which are awaiting to be added).
>
>
>
>> I'm stuck at a point with the engine vm successfully starting but
>> with only one nic present (connected to the ovirtmgmt bridge).
>
>
>
>> I'm trying to obtain the modified engine vm by means of a trick
>> which used to work in a previous (aborted because of lacking GlusterFS-by-
>> libgfapi support) oVirt 3.5 test setup (about a year ago, maybe
>> more): I'm substituting the standard /usr/share/ovirt-hosted-engine-
>> setup/templates/vm.conf.in with the following:
>
>
>
>> vmId=@VM_UUID@
>
>> memSize=@MEM_SIZE@
>
>> display=@CONSOLE_TYPE@
>
>> devices={index:2,iface:ide,address:{ controller:0, target:0,unit:0,
>> bus:1, type:drive},specParams:{},readonly:true,deviceId:@CDROM_UUI-
>> D@,path:@CDROM@,device:cdrom,shared:false,type:disk@BOOT_CDROM@}
>
>> devices={index:0,iface:virtio,format:raw,poolID:@SP_UUID@,volumeID-
>> :@VOL_UUID@,imageID:@IMG_UUID@,specParams:{},readonly:false,domain-
>> ID:@SD_UUID@,optional:false,deviceId:@IMG_UUID@,address:{bus:0x00,
>> slot:0x06, domain:0x0000, type:pci, function:0x0},device:disk,shar-
>> ed:exclusive,propagateErrors:off,type:disk@BOOT_DISK@}
>
>> devices={device:scsi,model:virtio-scsi,type:controller}
>
>> devices={index:4,nicModel:pv,macAddr:02:50:56:3f:c4:b0,linkActive:-
>> true,network:@BRIDGE@,filter:vdsm-no-mac-
>> spoofing,specParams:{},deviceId:@NIC_UUID@,address:{bus:0x00,
>> slot:0x03, domain:0x0000, type:pci,
>> function:0x0},device:bridge,type:interface@BOOT_PXE@}
>
>> devices={index:8,nicModel:pv,macAddr:02:50:56:3f:c4:a0,linkActive:-
>> true,network:lan,filter:vdsm-no-mac-
>> spoofing,specParams:{},deviceId:6c467650-1837-47ea-89bc-
>> 1113f4bfefee,address:{bus:0x00, slot:0x09, domain:0x0000, type:pci,
>> function:0x0},device:bridge,type:interface@BOOT_PXE@}
>
>> devices={index:16,nicModel:pv,macAddr:02:50:56:3f:c4:c0,linkActive-
>> :true,network:nfs,filter:vdsm-no-mac-
>> spoofing,specParams:{},deviceId:4d8e0705-8cb4-45b7-b960-
>> 7f98bb59858d,address:{bus:0x00, slot:0x0c, domain:0x0000, type:pci,
>> function:0x0},device:bridge,type:interface@BOOT_PXE@}
>
>> devices={device:console,specParams:{},type:console,deviceId:@CONSO-
>> LE_UUID@,alias:console0}
>
>> vmName=@NAME@
>
>> spiceSecureChannels=smain,sdisplay,sinputs,scursor,splayback,sreco-
>> rd,ssmartcard,susbredir
>
>> smp=@VCPUS@
>
>> cpuType=@CPU_TYPE@
>
>> emulatedMachine=@EMULATED_MACHINE@
>
>
>
>> but unfortunately the vm gets created like this (output from "ps";
>> note that I'm attaching a CentOS7.1 Netinstall ISO with an embedded
>> kickstart: the installation should proceed by HTTP on the lan
>> network but obviously fails):
>
>
>
>> /usr/libexec/qemu-kvm -name HostedEngine -S -machine
>
>> pc-i440fx-rhel7.1.0,accel=kvm,usb=off -cpu Westmere -m 4096 -
>> realtime mlock=off
>
>> -smp 2,sockets=2,cores=1,threads=1 -uuid f49da721-8aa6-4422-8b91-
>> e91a0e38aa4a -s
>
>> mbios type=1,manufacturer=oVirt,product=oVirt Node,version=7-
>> 1.1503.el7.centos.2
>
>> .8,serial=2a1855a9-18fb-4d7a-b8b8-6fc898a8e827,uuid=f49da721-8aa6-
>> 4422-8b91-e91a
>
>> 0e38aa4a -no-user-config -nodefaults -chardev
>> socket,id=charmonitor,path=/var/li
>
>> b/libvirt/qemu/HostedEngine.monitor,server,nowait -mon
>> chardev=charmonitor,id=mo
>
>> nitor,mode=control -rtc base=2015-10-25T11:22:22,driftfix=slew -
>> global kvm-pit.l
>
>> ost_tick_policy=discard -no-hpet -no-reboot -boot strict=on -device
>> piix3-usb-uh
>
>> ci,id=usb,bus=pci.0,addr=0x1.0x2 -device virtio-scsi-
>> pci,id=scsi0,bus=pci.0,addr
>
>> =0x4 -device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x5
>> =-drive file=
>
>> /var/tmp/engine.iso,if=none,id=drive-ide0-1-
>> 0,readonly=on,format=raw,serial= -device
ide-cd,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-
>> 0,bootindex=1 -drive file=/var/run/vdsm/storage/be4434bf-a5fd-44d7-8011-
>> d5e4ac9cf523/b3abc1cb-8a78-4b56-a9b0-e5f41fea0fdc/8d075a8d-730a-
>> 4925-8779-e0ca2b3dbcf4,if=none,id=drive-virtio-
>> disk0,format=raw,serial=b3abc1cb-8a78-4b56-a9b0-
>> e5f41fea0fdc,cache=none,werror=stop,rerror=stop,aio=threads -device
>> virtio-blk-pci,scsi=off,bus=pci.0,addr=0x6,drive=drive-virtio-
>> disk0,id=virtio-disk0 -netdev
>> tap,fd=26,id=hostnet0,vhost=on,vhostfd=27 -device virtio-net-
>> pci,netdev=hostnet0,id=net0,mac=02:50:56:3f:c4:b0,bus=pci.0,addr=0-
>> x3 -chardev socket,id=charchannel0,path=/var/lib/libvirt/qemu/chan-
>> nels/f49da721-8aa6-4422-8b91-
>> e91a0e38aa4a.com.redhat.rhevm.vdsm,server,nowait -device
virtserialport,bus=virtio-
>> serial0.0,nr=1,chardev=charchannel0,id=channel0,name=com.redhat.rh-
>> evm.vdsm -chardev socket,id=charchannel1,path=/var/lib/libvirt/qem-
>> u/channels/f49da721-8aa6-4422-8b91-
>> e91a0e38aa4a.org.qemu.guest_agent.0,server,nowait -device
virtserialport,bus=virtio-
>> serial0.0,nr=2,chardev=charchannel1,id=channel1,name=org.qemu.gues-
>> t_agent.0 -chardev socket,id=charchannel2,path=/var/lib/libvirt/qe-
>> mu/channels/f49da721-8aa6-4422-8b91-e91a0e38aa4a.org.ovirt.hosted-
>> engine-setup.0,server,nowait -device virtserialport,bus=virtio-
>> serial0.0,nr=3,chardev=charchannel2,id=channel2,name=org.ovirt.hos-
>> ted-engine-setup.0 -chardev
socket,id=charconsole0,path=/var/run/ovirt-vmconsole-
>> console/f49da721-8aa6-4422-8b91-e91a0e38aa4a.sock,server,nowait -
>> device virtconsole,chardev=charconsole0,id=console0 -vnc
>> 0:0,password -device cirrus-vga,id=video0,bus=pci.0,addr=0x2 -msg
>> timestamp=on
>
>
>
>> There seem to be no errors in the logs.
>
>
>
>> I've tried reading some (limited) Python setup code but I've not
>> found any obvious reason why the trick should not work anymore.
>
>
>
>> I know that 3.6 has different network configuration/management and
>> this could be the hot point.
>
>
>
>> Does anyone have any further suggestion or clue (code/logs to
>> read)?
>
>
>
> The VM creation path is now a bit different cause we use just vdscli
> library instead of vdsClient.
>
> Please take a a look at mixins.py
>
>
Many thanks for your very valuable hint:
>
>
I've restored the original /usr/share/ovirt-hosted-engine-
setup/templates/vm.conf.in and I've managed to obtain the 3-nics-
customized vm by modifying /usr/lib/python2.7/site-
packages/ovirt_hosted_engine_setup/mixins.py like this ("diff -Naur"
output):
>
> Hi Simone,
> >
>
A separate network issue (already reported to the list) prevented me
from successfully closing up the setup in its final phase
(registering the host inside the Engine), so all seemed well while
being stuck there :)
>
>
Now that I've solved that (for which I'm informing the list asap in a
separate message) and the setup ended successfully, it seems that the
last step of the HE setup (shutdown the Engine vm to place it under HA
agent control) starts/creates a "different vm" and my virtual hardware
customizations seem to be gone (only one NIC present, connected to
ovirtmgmt).
>
>
My wild guess: maybe I need BOTH the mixins.py AND the vm.conf.in
customizations? ;)
>
> Yes, you are right: the final configuration is still generated from
> the template so you need to fix both.
>
>
>
It seems (from /etc/ovirt-hosted-engine/hosted-engine.conf) that the
Engine vm definition is now in /var/run/ovirt-hosted-engine-ha/vm.conf
>
the vm configuration is now read from the shared domain converting
back from the OVF_STORE, the idea is to let you edit it from the
engine without the need to write it on each host. /var/run/ovirt-hosted-engine-
ha/vm.conf is just a temporary copy.
As you are probably still not able to import the hosted-engine storage
domain in the engine due to a well know bug, your system will fallback
to the initial vm.conf configuration still on the shared storage and
you can manually fix it: Please follow this procedure substituting
'192.168.1.115:_Virtual_ext35u36' with the mount point of hosted-
engine storage domain on your system:
mntpoint=/rhev/data-center/mnt/192.168.1.115:_Virtual_ext35u36
dir=`mktemp -d` && cd $dir sdUUID_line=$(grep sdUUID
/etc/ovirt-hosted-engine/hosted-
engine.conf) sdUUID=${sdUUID_line:7:36} conf_volume_UUID_line=$(grep
conf_volume_UUID /etc/ovirt-hosted-engine/hosted-engine.conf)
conf_volume_UUID=${conf_volume_UUID_line:17:36}
conf_image_UUID_line=$(grep conf_image_UUID /etc/ovirt-hosted-engine/hosted-
engine.conf) conf_image_UUID=${conf_image_UUID_line:16:36} dd
if=$mntpoint/$sdUUID/images/$conf_image_UUID/$conf_volume_UUID
2>/dev/null| tar -xvf -
# directly edit vm.conf as you need
tar -cO * | dd
of=$mntpoint/$sdUUID/images/$conf_image_UUID/$conf_volume_UUID
When your engine will import the hosted-engine storage domain it will
generate an OVF_STORE with the configuration of the engine VM, you
will be able to edit some parameters from the engine and the agent
will read the VM configuration from there.
Hi Simone, I followed your advice and modified the vm.conf inside the
conf_volume tar archive.
Then I put the system (still with only one physical host) in global
maintenance from the host:
hosted-engine --set-maintenance --mode=global
Then i regularly powered off the Engine vm and confirmed it from the
host:
hosted-engine --vm-status
Then restarted it from the host:
hosted-engine --vm-start
Finally, I exited maintenance from the host:
hosted-engine --set-maintenance --mode=none
Waited a bit and verified it:
hosted-engine --vm-status
It all worked as expected!
Many thanks again.
Regards, Giuseppe
>
>
>
Many thanks for your assistance (and obviously I just sent a related
wishlist item on the HE setup ;)
>
>
Regards,
>
Giuseppe
>
>
>
>
*********************************************************************-
> ***************
>
>
>
> --- mixins.py.orig 2015-10-20 16:57:40.000000000
+0200
>
> +++ mixins.py 2015-10-26 22:22:58.351223922 +0100
>
> @@ -25,6 +25,7 @@
>
>import random
>
>import string
>
>import time
>
> +import uuid
>
>
>
>
>
>from ovirt_hosted_engine_setup import constants as
ohostedcons
>
> @@ -247,6 +248,44 @@
>
>]['@BOOT_PXE@'] == ',bootOrder:1':
>
>nic['bootOrder'] = '1'
>
>conf['devices'].append(nic)
>
> + nic2 = {
>
> + 'nicModel': 'pv',
>
> + 'macAddr':
'02:50:56:3f:c4:a0',
>
> + 'linkActive': 'true',
>
> + 'network': 'lan',
>
> + 'filter':
'vdsm-no-mac-spoofing',
>
> + 'specParams': {},
>
> + 'deviceId': str(uuid.uuid4()),
>
> + 'address': {
>
> + 'bus': '0x00',
>
> + 'slot': '0x09',
>
> + 'domain': '0x0000',
>
> + 'type': 'pci',
>
> + 'function': '0x0'
>
> + },
>
> + 'device': 'bridge',
>
> + 'type': 'interface',
>
> + }
>
> + conf['devices'].append(nic2)
>
> + nic3 = {
>
> + 'nicModel': 'pv',
>
> + 'macAddr':
'02:50:56:3f:c4:c0',
>
> + 'linkActive': 'true',
>
> + 'network': 'nfs',
>
> + 'filter':
'vdsm-no-mac-spoofing',
>
> + 'specParams': {},
>
> + 'deviceId': str(uuid.uuid4()),
>
> + 'address': {
>
> + 'bus': '0x00',
>
> + 'slot': '0x0c',
>
> + 'domain': '0x0000',
>
> + 'type': 'pci',
>
> + 'function': '0x0'
>
> + },
>
> + 'device': 'bridge',
>
> + 'type': 'interface',
>
> + }
>
> + conf['devices'].append(nic3)
>
>
>
>cli = self.environment[ohostedcons.VDSMEnv.VDS_CLI]
>
>status = cli.create(conf)
>
>
>
>
*********************************************************************-
> ***************
>
>
>
> Obviously this is a horrible ad-hoc hack that I'm
not able to generalize/clean-
> up now: doing so would involve (apart from a deeper understanding of
> the whole setup code/workflow) some well-thought-out design decisions
> and, given the effective deprecation of the aforementioned easy-to-
> modify vm.conf.in template substituted by hardwired Python program
> logic, it seems that such a functionality is not very high on the
> development priority list atm ;)
>
>
>
> Many thanks again!
>
>
>
> Kind regards,
>
> Giuseppe
>
>
>
> >> Many thanks in advance.
>
> >
>
> >> Kind regards,
>
> >> Giuseppe
>
> >
>
> >> PS: please keep also my address in replying because I'm
> >> experiencing some problems between Hotmail and oVirt-mailing-
> >> list
>
> >
>
> >> _______________________________________________
>
> >
>
> Users mailing list
>
> >>Users(a)ovirt.org
>
> >>http://lists.ovirt.org/mailman/listinfo/users
>
> >
3080
days inactive
3080
days old
0 comments
1 participants
participants (1)
-
Giuseppe Ragusa